Краткое содержание страницы № 1 
                    
                         
 
 Operation Manual 
 
 
 
 
 
NIGHT VISION BINOCULARS/GOGGLES 
NV66 – G2 
 
 
105 Sparks Ave., Toronto, ON, M2H 2S5, Canada
                                                                                                                                                                                                                                                                                                                                                                                     
                    
                    Краткое содержание страницы № 2 
                    
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
                    
                    Краткое содержание страницы № 3 
                    
                        IMPORTANT INFORMATION  Read prior to activation.  You have purchased a sophisticated electronic device.   To operate it properly, please read this manual  carefully.  Ignoring the operation procedures described in this  manual will void your warranty.     NEVER disassemble the unit. This device contains a  source of high voltage, which may be hazardous to  your health.   NEVER open the objective lens of an active unit in  bright light, including daylight. In the daytime the  objective lens mus
                    
                    Краткое содержание страницы № 4 
                    
                        PRECAUTIONS  NV66-G2 is a sophisticated precise optical instrument  equipped with electronics. It should be handled with due  care:   Unit contains fragile components. Avoid impacts,  dust, moisture and sharp changes of temperature.   Do not touch the optical surfaces other than for  cleaning. Doing so may damage the anti-reflection  coating.   Clean optical surfaces with professional lens cleaning  supplies.   Use only a soft clean cloth to clean the exterior of the  device.   Keep the dev
                    
                    Краткое содержание страницы № 5 
                    
                        TABLE OF CONTENTS  1. OVERVIEW................................................................3  2. DELIVERY SET.........................................................5  2.1 Standard delivery set................................5  2.2 Optional accessories ................................5  3. SPECIFICATIONS .....................................................6  3.1 Unit specifications ...................................6  3.2 Main tube parameters...............................7  3.3 Spatial fr
                    
                    Краткое содержание страницы № 6 
                    
                        6. TROUBLESHOOTING ............................................18  6.1 No green light through eyepieces...........18  6.2 Image is unclear.....................................18  6.3 Image flashes .........................................18  6.4 Condensation accumulates on the parts .18  6.5 Visibility decreased or disappeared .......19  7. WARRANTY............................................................20  8. CUSTOMER SUPPORT...........................................21  9. ACCEPTANCE CERTI
                    
                    Краткое содержание страницы № 7 
                    
                        1. OVERVIEW    NV66-G2 (the unit) is optoelectronic goggles intended for  observation of objects and orientation at night or under  dark conditions.  The unit is equipped with a generation  2+ intensifier tube, which amplifies low light, such as  moonlight, starlight or man-made light.   Add-on lens can be attached to the unit to increase  magnification.  Unit can be mounted on a helmet or headgear or used as  night vision binoculars.    Some typical activities where NV66-G2 can be useful:   Wi
                    
                    Краткое содержание страницы № 8 
                    
                        Features   Built-in infrared illuminator allows observation in  total darkness (i.e. cave or dark room);   Helmet mount (optional) allows combatant  operations   Flip/flop mechanism provides for unobstructed  vision when the unit is mounted on headgear or  helmet   Waterproof design (1 meter deep immersion for 30  minutes)   Soft rubber eyecup makes viewing comfortable    Please read all the instructions carefully prior to using the  unit.  Manufacturer reserves the right to introduce minor
                    
                    Краткое содержание страницы № 9 
                    
                          2. DELIVERY SET  2.1 Standard delivery set   QUANTITY  NV66-G2 unit with 1x lens and headgear 1  Lens cap 1  Neck strap 1  Soft case 1  Manual 1  Warranty card 1  AA battery 2  2.2 Optional accessories    3x, 4x, 5x, 8x lenses Hard case  Lens cleaning kit Helmet mount       Exact Delivery Set is subject to the specific contract  terms.   5                                                                                                                                                             
                    
                    Краткое содержание страницы № 10 
                    
                          3. SPECIFICATIONS  3.1 Unit specifications  18 mm   Image Intensifier Tube   (IIT)  Gen. 2+  Apparent field of view 40º  Eye relief 15 mm  1x Objective focal length /  27.5 mm / F1.2  F-number  4x, 5x, 8x Objective focal  100 / F1.5, 130 / F2.3, 216.4 / F2.0  length, mm / F number  Interpupillary distance 57-73 mm  Focus range (1x) 0.25 m -   Dioptric correction ±5  Battery type 2 standard AA batteries  Over 80 hours without IR; over 30 hours  Battery life  with IR  Low battery indicator √  I
                    
                    Краткое содержание страницы № 11 
                    
                        3.2 Main tube parameters    Image Intensifier Type EPM66G2  (Generation/Grade)  Photocathode operating diameter 18 mm  Photocathode type S-25   Photocathode sensitivity:    Integral 450 A/ lm  26 mA/W   Spectral at  = 850 nm  Light amplification >20,000 fl/fc  Image magnification 1x  Signal-to-noise ratio, min 18  Current consumption, max  18 mA  Voltage   2.8 0.8 V  MTBF, hours 10 000  Operating temperature range -50°C … +50°C              7                                                   
                    
                    Краткое содержание страницы № 12 
                    
                        3.3 Spatial frequency-contrast characteristic    Frequency, lines/mm Contrast transfer  coefficient  2.5 0.83  7.5 0.56  15.0 0.30  3.4 Field of view cleanness     I ZONE II ZONE III ZONE  Allowed spot  0 - 5, 6 5, 6 - 14,7 14,7 - 17, 5  diameter, m  mm mm mm  Over 250 0 0 0  150 to 250 0 0 1  100 to 150 0 2 2  50 to 100 1 3 3  0 to 50 Not specified          8                                                                                                                                         
                    
                    Краткое содержание страницы № 13 
                    
                        4. UNIT DESIGN      3 2  1    4 9     8         7  5   6    Fig.1 NV66-G2 goggles Fig.2 Headgear  1 - On-Off, IR switch 6 - Objective lens cover  2 - Mounting socket 7 - Objective lens   3 - Eyepiece adjustment ring 8 - Tightening screw  4 - Eyepieces 9 - Lever  5 - Battery compartment   cover    9                                                                                                                                                                                                         
                    
                    Краткое содержание страницы № 14 
                    
                          5. OPERATION INSTRUCTIONS  5.1  Installing battery  Unpack the device. Unit is supplied with battery not  installed.     Prior to installing the battery, make sure the switch  (1, Fig.1) is in the OFF position and the lens cap is on.    Unscrew the battery compartment cover (5, Fig.1), and  install 2 fresh AA batteries. Observe the correct polarity  indicated on the housing. Screw in the battery  compartment cover back.     5.2  Switching the unit on   In daylight put on the lens cap prior to 
                    
                    Краткое содержание страницы № 15 
                    
                                    Fig.3 Low battery indicator    When the unit is ON user may see a circular indicator  through the eyepiece (Fig. 3). It is hardly noticeable when  not active.   Flashing indicates low battery. For uninterrupted  operation keep fresh batteries ready and replace them on  time.   Solid red dot indicates that the IR illuminator is on.   In the daytime with lens cap on it is normal to observe a  fuzzy image. Switching on the unit device in the daytime  is intended for testing purposes onl
                    
                    Краткое содержание страницы № 16 
                    
                        5.4  Operating at night  Take off the lens cover (6, Fig.1) from the lens (7, Fig.1).   Turn on the device using switch (1, Fig.1). If lighting is  insufficient, turn on the IR illuminator by turning switch  (1, Fig.1).  The red indicator (Fig. 3) will go on. IR  illuminator is effective when observing an object located  not far from the viewer.    The IR illuminator is visible to anybody   with a night vision device.    You can raise the unit up for unobstructed vision without  taking the headg
                    
                    Краткое содержание страницы № 17 
                    
                        5.6  Focusing   To obtain sharp image at other distance adjust the lens  focus (7, Fig.1) leaving eyepiece setting intact. You  should be able to obtain a sharp image for distances from  0.2-10 m to infinity depending on lens magnification.    5.7  Using Unit with headgear  Prior to using the unit with the headgear adjust all the  straps to the head size.   When wearing the unit the eye-relief (the distance  between your eyes and the eyepieces) should be 15-22  mm. In order to achieve this, loos
                    
                    Краткое содержание страницы № 18 
                    
                        5.9  Installation of interchangeable lenses  Do not apply an excessive force when   changing the lenses.  The following procedure is identical for 1x, 4x, 5x or 8x  lenses.   1. Make sure the unit is off.   2. Remove the lens cap (6, Fig.1).   3. Detach the current lens: hold the lens by its base  (1, Fig.1) and rotate it counter-clockwise. Once  the lens has been removed, store it in a safe,  clean space.   4. Screw in (clockwise) new lens.   The threads are very fine (to prevent humidity  pene
                    
                    Краткое содержание страницы № 19 
                    
                              Fig.4 NV66-G2 with 4x lens          Fig.5 NV66-G2 with 8x lens          15                                                                                                                                                                                                                                                                                                                                                                                                                                    
                    
                    Краткое содержание страницы № 20 
                    
                        5.10   Using optional helmet mount                   4  1 2 3     Fig.6 NV66-G2 with 8x lens    1 - Locking screw 3 - Flip/Flop  adjusting screws  2 - Flip/Flop button 4 - Mount binding  screw    The unit can be equipped with an optional helmet mount.  This mount can be customized to fit a variety of existing  helmet models.   The mount is attached to a helmet with straps.     16