Краткое содержание страницы № 1
MATRIX GX3000S
25 Watt VHF/FM
ITU Class D DSC Marine Transceiver
Owner's Manual
Waterproof construction
Commercial grade ITU Class D DSC VHF
Independent Channel 70 receiver built-in for continuous DSC watching
30 W Loud Hailer with listen back and 4 fog horns, Bells & Whistles
Capable of connecting 2 optional enhanced CMP25 RAM+ second sta-
tion remote microphone or VH-310 Handset
Intercom between radio and second station microphone
DSC position request and send functions with comp
Краткое содержание страницы № 2
TABLE OF CONTENTS 1 GENERAL INFORMATION............................................................................................................. 4 2 PACKING LIST ............................................................................................................................... 4 3 OPTIONS ....................................................................................................................................... 4 4 SAFETY / WARNING INFORMATION .........................
Краткое содержание страницы № 3
TABLE OF CONTENTS 11.6 CALL WAITING DIRECTORY ............................................................................................ 46 11.6.1 Enabling the Call Waiting Feature ........................................................................... 46 11.6.2 Reviewing Received Calls Logged into the Call Waiting Directory ...................... 47 11.6.3 To Delete the Received Log From the “DSC Log” Directory ............................... 47 11.7 GROUP CALL .
Краткое содержание страницы № 4
1 GENERAL INFORMATION The Vertex Standard GX3000S is a VHF/FM transceiver designed for use in the frequency range of 156.025 to 163.275 MHz. The GX3000S can be oper- ated from 11 to 16 VDC and has a switchable RF output power of 1 watt or 25 watts. The GX3000S is a Class D DSC (Digital Selective Calling) VHF and includes a 30W PA with preprogrammed fog signals, bells and whistles. 2 connections are available for the RAM+ or VH-310 second station remote microphones. Class D operation allows cont
Краткое содержание страницы № 5
4 SAFETY / WARNING INFORMATION This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation dis- tance of 0.6 m (2 feet). Failure to observe these restrictions will result in exceeding the FCC RF expo- sure limits. Antenna Installation: The antenna must be located at least 0.6 m (2 feet) away from passengers in order to comply w
Краткое содержание страницы № 6
5 FCC RADIO LICENSE INFORMATION Vertex Standard radios comply with the Federal Communication Commission (FCC) requirements that regulate the Maritime Radio Service. STATION LICENSE An FCC ship station license is no longer required for any vessel traveling in U.S. waters (except Hawaii) which is under 20 meters in length. However, any vessel required to carry a marine radio on an international voyage, carrying a HF single side band radiotelephone or marine satellite terminal is required to have
Краткое содержание страницы № 7
6 FCC NOTICE NOTICE Unauthorized changes or modifications to this equipment may void com- pliance with FCC Rules. Any change or modification must be approved in writing by Marine Division of Vertex Standard. NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in- terference in a residential installation. This equipment generates, us
Краткое содержание страницы № 8
7 GETTING STARTED 7.1 ABOUT VHF RADIO The radio frequencies used in the VHF marine band lie between 156 and 158 MHz with some shore stations available between 161 and 163 MHz. The ma- rine VHF band provides communications over distances that are essentially “line of sight” (VHF signals do not travel well through objects such as buildings, hills or trees). Actual transmission range depends much more on antenna type, gain and height than on the power output of the transmitter. On a fixed mount 2
Краткое содержание страницы № 9
7.3 COAXIAL CABLE VHF antennas are connected to the transceiver by means of a coaxial cable, a shielded transmission line. Coaxial cable is specified by it’s diameter and con- struction. For runs less than 20 feet, RG-58/U, about 1/4 inch in diameter is a good choice. For runs over 20 feet but less than 50 feet, the larger RG-8X should be used for cable runs over 50 feet RG213 should be used. For installation of the connector onto the coaxial cable refer to the figure below. Adapter 1/16'' 3/4'
Краткое содержание страницы № 10
s y b Acce sor Ca le 8 INSTALLATION 8.1 LOCATION The radio can be mounted at any angle. Choose a mounting location that: • is far enough from any compass to avoid any deviation in compass read- ing due to the speaker magnet • provides accessibility to the front panel controls • allows connection to a power source and an antenna • has nearby space for installation of a microphone hanger • the antenna must be mounted at least 3 feet from radio Note: To insure the radio does not affect the compas
Краткое содержание страницы № 11
8.3 ACCESSORY CABLE Wire Color/Description Connection Examples ( ) WHITE - External Speaker + Connect to external 4 Ohm audio speaker (–) SHIELD - External Speaker Connect to external 4 Ohm audio speaker RED - PA Speaker (+) Connect to external 4 Ohm PA speaker SHIELD - PA Speaker (–) Connect to external 4 Ohm PA speaker (+) BLUE- NMEA Input (+) Connect to NMEA output of GPS (–) (–) GREEN - NMEA Input Connect to NMEA output of GPS ( ) GRAY- NMEA Output (+) Connect to NMEA + input of GPS (–) B
Краткое содержание страницы № 12
8.4 CHECKING GPS CONNECTIONS After connections have been made between the GX3000S and the GPS, a small satellite icon will appear on the top right corner of the LCD display. To see the additional GPS information, press and hold the [H/L(NAV)] key. The GX3000S shows the Date, Time, SOG and COG. 8.5 CHANGING THE GPS TIME From the Factory the GX3000S shows GPS satellite time or UTC time. A time offset is needed to show the local time in your area. [ ( )] 1. Press and hold down the CALL MENU key u
Краткое содержание страницы № 13
8.6 CHANGING THE TIME LOCATION Sets the radio to show UTC time or local time with the offset inputted in section 8.5 Changing the GPS Time. [ ( )] 1. Press and hold down the CALL MENU key until “Radio Setup” menu appears. [ ] 2. Press the ENT key, then select “Time Disp” in the “Radio Setup” menu with the CHANNEL selector knob. [ ] 3. Press the ENT key. 4. Turn the CHANNEL selector knob to select “UTC” or “Local.” [ ] 5. Press the ENT key to store the selected setting. 6. To exit this menu and
Краткое содержание страницы № 14
8.8 RECEIVER AUDIO TONE CONTROL Allows the treble and bass of the speaker audio to be adjusted for best listening in noisy enviroments. The effect is similar to adjusting a the treble and bass controls on a stereo. [ ( )] 1. Press and hold down the CALL MENU key until “Radio Setup” menu appears. [ ] 2. Press the ENT key, then select “TONE CONT.” in the “Radio Setup” menu with the CHAN- NEL selector knob. [ ] 3. Press the ENT key, then select “BASS” with the CHANNEL selector knob. 4. Turn the CH
Краткое содержание страницы № 15
8.9 OPTIONAL MMB-84 FLUSH MOUNT INSTALLATION 1. To assist in flush mounting, a template has been included. Use this tem- plate to find the mounting location. 2. Use the template to mark the location where the rectangular hole is to be cut. Confirm the space behind the dash or panel is deep enough to accom- modate the transceiver (at least 6 inches or 15 cm deep). There should be at least 1/2 inch (1.3 cm) between the transceiver’s heatsink and any wiring, cables or structures. 3. Cut out the re
Краткое содержание страницы № 16
8.10 OPTIONAL ENHANCED RAM+ SECOND STATION MIC AND/OR VH-310 HANDSET INSTALLATION The GX3000S is capable of using up to 2 Enhanced RAM+ mics or VH-310 handsets to remotely control the Radio, DSC, and Distress functions. In addi- tion the GX3000S can operate as a full function intercom system when either the RAM+ or VH-310 is connected. 1. Connect the Routing Cable to the one of the Remote Mic eight pin connec- tor on the rear panel, then tighten the Cable Nut (See Figure 2). 2. Referring to Figu
Краткое содержание страницы № 17
Remote Mic or External Speaker Selection By default the RAM+ or VH-310 Handset internal speaker is turned on, how- ever using the RAM+ mic (or VH-310 Handset) this speaker can be turned off so the external speaker can be used. RAM+ mic procedure [ ] 1. Press and hold the CALL/SET key. [ ] [ ] 2. Press the or key to select “RADIO SETUP.” [ ] 3. Press the CALL/SET key. [ ] 4. Press the key to until “EXT SPK” is shown and press the [ ] CALL/SET key. [ ] [ ] 5. Press the or key to select
Краткое содержание страницы № 18
9 CONTROLS AND INDICATORS NOTE This section defines each control of the transceiver. See Figures for lo- cation of controls. For detailed operating instructions refer to section “10 BASIC OPERATION.” ( ) POWER SWITCH / VOLUME CONTROL VOL/PWR Turns the transceiver on and off as well as adjusts the audio volume. Press and hold this knob for one second to turn the radio on. Clockwise rotation of this knob increases the audio volume level. Press and hold this knob for two seconds to turn the radio
Краткое содержание страницы № 19
KEYPAD [ ] 16/9 Key Immediately recalls channel 16 from any channel location. Holding down this key recalls channel 9. Pressing the [16/9] key again reverts to the previous selected working channel. Secondary use Press and hold the [16/9] key then press the [WX] key to switch the Channel Group. [ ] WX Key Immediately recalls the previously selected NOAA weather channel from any channel. Secondary use [ ] [ ] Holding down the 16/9 key while pressing the WX key changes from USA, International and
Краткое содержание страницы № 20
[H/L(NAV)] Key Press this key to toggle the transmit output power between 25 W (High) and 1 W (Low) power. When the [H/L(NAV)] key is pressed while the transceiver is on channel 13 or 67, the power will temporarily switch from LO to HI power until the PTT is released. The [H/L(NAV)] key does not function on transmit inhibited and low power only channels. NOTE: 1W low power is indicated by LO on the display, when 25W high power is selected the display do not show an indication. Secondary use Pr
