Руководство по эксплуатации Trek 2.0

Краткое содержание страницы № 1

Sensor2.0 6/12/00 10:06 AM Page 1
Trek Sensor 2.0
Cycling Computer Owners Manual
Congratulations and thank you for purchasing your Trek Cycling Computer.
Before operation please read this instruction manual carefully and retain it for
future reference. We recommend setting the speed scale and wheel
circumference before installing the computer.
Precautions
Remember to watch the road or trail while riding. Watching your bicycle
computer makes it difficult to see upcoming obstacles. Awareness o

Краткое содержание страницы № 2

Sensor2.0 6/12/00 10:06 AM Page 2 button to switch between miles and First Second kilometers. Press both L & R buttons to Point Point confirm and enter Wheel-Circumference Measure the distance which setting as shown in fig 4. Table 1. Setting values reference table is your circumference If incorrect data appears on the screen, Preparation - Must be completed before operation please re-install battery again. 4. Setting the wheel circumference (100mm-2999mm) Wheel/Tire Size Wheel size Setting

Краткое содержание страницы № 3

Sensor2.0 6/12/00 10:06 AM Page 4 4. Slide the cyclometer into the bracket until it snaps up. c. Bike 1 or 2 selecting & resetting the wheel-circumference value When you are in wheel-circumference value review mode, press L or R button to select bike 1 or 2. For wheel-circumference resetting, press L & R at the same time again until the last two digits blink. Repeat steps as above ( point 4) to reset the wheel circumference as your bike. This convenient design is handy for switching between d

Краткое содержание страницы № 4

Sensor2.0 6/12/00 10:06 AM Page 6 Display Functions Riding time ( 0:00:00-99:59:59) — RT Speed 0-30km/h 31-60km/h over 60 m/h The Elapsed Time is measured from the start point to the Minimal display unit 0.1km/h(mile/h) 0.5km/h(mile/h) 1km/h(mile/h) current point. It starts counting automatically when signals are received, it stops when signals have stopped for over two Current Speed seconds. When 10 hours have been reached, screen will display (0.0-70 miles or 99 kms)-S “HH” hr & “MM:SS

Краткое содержание страницы № 5

Sensor2.0 6/12/00 10:06 AM Page 8 12/24 – hour Clock TROUBLE SHOOTING Under any display mode, press R button for 1 second. Clock The following situations do not indicate malfunction of the computer. Check time will displayed. Re-press either L or R button to return to the following before taking unit for repair. “Odometer (ODO)” mode. Refer to the instruction of “Setting clock time” for 12/24- hour selecting and resetting. Trouble Check Items Remedy Auto Start/Stop Missed setting for speed E

Краткое содержание страницы № 6

Sensor2.0 6/12/00 10:06 AM Page 10 SPECIFICATIONS Controller 4-bit 1-chip Microcomputer (Crystal Controlled Oscillator) Display Liquid Crystal Display (LCD) Sensor No Contact Magnetic Sensor Power Supply CR2032 x1 (3V) Operating Temperature Range 0.0 C to 40.0 C (32.0 F to 104.0 F) Storage Temperature Range -20.0 C to 50.0 C (-40 F to 122.0 F) Applicable wheel circumference 100mm-2999mm Battery Life Approx. 1 year ©1999 Trek Bicycle Corporation. All rights reserved. Page 10