Краткое содержание страницы № 1
Operator’s
Manual
!
Zero Turn Rider
Mfg. No. Description
2691032-00 Zero Turn Rider with 46” Mower
2691032-01 Zero Turn Rider with 46” Mower
2691037-00 Zero Turn Rider with 46” Mower
2691037-01 Zero Turn Rider with 46” Mower
2691034-00 Zero Turn Rider with 46” Mower
2691039-00 Zero Turn Rider with 46” Mower
2691035-00 Zero Turn Rider with 52” Mower
2691035-01 Zero Turn Rider with 52” Mower
2691040-00 Zero Turn Rider with 52” Mower
2691040-01 Zero Turn Rider with 52” Mower
2691098-00 Zero Turn R
Краткое содержание страницы № 2
General Information Thank you for purchasing this quality-built riding mower. We’re pleased that you’ve placed your confidence in our brand. When operated and maintained according to the instructions in this manual, your riding mower will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with mowers and how to avoid them. Because Briggs & Stratton Power Products Group, LLC does not necessarily know all the
Краткое содержание страницы № 3
Table of Contents Operator Safety .................................................. 4 Adjustments and Service ................................ 23 Safety Interlock System Tests ...............................12 Seat and Ground Speed Lever Adjustments .........23 Cutting Height Adjustment ....................................24 Features and Controls ..................................... 13 Control Functions ..................................................13 Front Suspension Adjustment ..........
Краткое содержание страницы № 4
Operator Safety Operating Safety Congratulations on purchasing a superior-quality piece of lawn and garden equipment. Our products are designed and manufac- tured to meet or exceed all industry standards for safety. Do not operate this machine unless you have familiarized yourself with it. Reading and understanding this operator’s manual is a way to do just that. Power equipment is only as safe as the operator. If it is misused, or not properly maintained, it can be dangerous! Remember, y
Краткое содержание страницы № 5
Slope Operation Operation on slopes can be dangerous. Using the unit on a slope that is too steep where you do not have adequate wheel traction (and control) can cause sliding, loss of steering, control, and possible rollover. You should not operate on a slope greater than a 3.5 foot rise over a 20 foot length (10 degrees). Always mow up and down slopes, not across, and avoid sudden turns or rapid speed changes. Reduce speed and use extreme caution on ALL slopes. Also, note that the surfa
Краткое содержание страницы № 6
Retaining Walls, Drop-Offs, and Water Retaining walls and drop-offs around steps and water are a common hazard. Give yourself a minimum of two mower widths of clearance around these hazards and hand-trim with a walk behind mower or string trimmer. Wheels drop- ping over retaining walls, edges, ditches, embankments, or into water can cause rollovers, which may result in serious injury, death, or drowning. Fuel and Maintenance Always disengage all drives, shutoff the engine, and remove the key
Краткое содержание страницы № 7
WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body and must not be under t
Краткое содержание страницы № 8
Preparation 3. DO NOT leave machine with engine running. STOP (Continued From Previous Page) engine, STOP blades, SET brake, and Remove key 6. Check the area to be mowed and remove all objects before leaving operators position of any reason. such as toys, wire, rocks, limbs and other objects that 4. DO NOT operate machine unless properly seated could cause injury if thrown by blade or interfere with with feet on feet rests or pedal(s). mowing. 5. STOP BLADES and ENGINE and make
Краткое содержание страницы № 9
Towing Maintenance 1. Tow only with a machine that has a hitch designed for (Continued From Previous Column) towing. DO NOT attach towed equipment except at 6. Always provide adequate ventilation when running the hitch point. engine. Exhaust gases contain carbon monoxide, an 2. Follow the manufacturer’s recommendation for weight odorless and deadly poison. limits for towed equipment and towing on slopes. 7. Disconnect negative (black) cable from battery before 3. DO NOT allow chi
Краткое содержание страницы № 10
10 Not for Reproduction THIS IS A 10 DEGREE SLOPE FOLD ALONG DOTTED LINE SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 10 DEGREES MAX. WARNING: To avoid serious injury, operate your unit up and down the face of slopes, never across the face. Do not operate on slopes greater than 10 degrees. Make turns gradually to prevent tipping or loss of control. Exercise extreme caution when changing direction on slopes. Braking may be affected by
Краткое содержание страницы № 11
If any of these decals are lost or damaged, replace them Safety and Instructional Decals at once. See your local dealer for replacements. All DANGER, WARNING, CAUTION and instructional These decals are easily applied and will act as a con- messages on your rider and mower should be carefully stant visual reminder to you, and others who may use the read and obeyed. Personal bodily injury can result when equipment, to follow the safety instructions necessary for these instructions a
Краткое содержание страницы № 12
Safety Interlock System Tests This unit is equipped with a Safety Interlock System. Do not attempt to bypass or tamper with the switches/ devices. 7104227 7104226 TEST 1 — ENGINE SHOULD NOT CRANK IF: Decal, Ground Decal, Ground • PTO switch is engaged, OR Speed Lever, L.H. Speed Lever, R.H. • Parking brake is disengaged, OR Part No. 7104226 Part No. 7104227 • Ground speed levers are not locked in their START/ PARK positions. TEST 2 — ENGINE SHOULD CRANK IF: • PTO switch is NOT engaged, AN
Краткое содержание страницы № 13
Features and Controls Control Functions The information below briefly describes the function of individual controls. Starting, stopping, driving, and mow- ing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the Operation section. Ground Speed Levers Engine Speed / Choke Control These levers control the ground speed and direc- (Choke-A-Matic - 22HP) tion of the rider. The left lever co
Краткое содержание страницы № 14
Engine Speed Control (EFM - 24 & Fuel Tank Cap To remove the cap, turn counterclockwise. 27HP) The engine speed control controls the engine speed and Mower Cutting Height Adjustment choke. Move the engine speed control to the FAST posi- Switch tion to increase engine speed, and to the SLOW position The mower cutting height is adjustable between 1-1/2” to decrease engine speed. (3,8 cm) and 3-3/4” (9,5 cm). See Cutting Height NOTE: The engine on this unit features an Electronic Adj
Краткое содержание страницы № 15
Operation General Operating Safety Checks Before Starting Before first time operation: • Check that the crankcase is filled to full mark on dip- stick (A, Figure 1 - located under engine cover). See • Be sure to read all information in the Operator Safety the engine owner’s manual for instructions and oil section before attempting to operate this rider and recommendations. mower. • Make sure all nuts, bolts, screws and pins are in • Become familiar with all of the controls and how to pl
Краткое содержание страницы № 16
7. Pivot the ground speed levers in from the START/ Starting the Engine PARK position to the neutral ‘N’ position. NOTE: The engines on some units feature an Electronic 8. Begin mowing. See Operator Safety for tips on safe Fuel Management (EFM) system, and do not require mowing practices. choking. 9. When finished, shut off the PTO. 1. While sitting in the operator’s seat, make sure the PTO switch is disengaged, the parking brake is 10. Stop the engine (see Stopping the Rider and en
Краткое содержание страницы № 17
Zero Turn Smooth Travel Driving Practice The ground speed levers of the zero turn rider are The ground speed levers of the zero turn rider are responsive. responsive, and learning to gain a smooth and efficient control of the rider’s forward, reverse, and turning move- The BEST method of ments will take some practice. handling the ground speed levers is in three Spending some time going through the maneuvers shown steps — as shown in and becoming familiar with how the unit accel
Краткое содержание страницы № 18
Practice Turning Around a Corner Practice Turning In Place While traveling forward allow one lever to gradually return To turn in place, “zero turn,” gradually move one ground back toward neutral. Repeat several times. speed lever forward from neutral and one lever back from neutral simultaneously. Repeat several times. To prevent pivoting directly on thetire tread, it is best to keep both wheels going at least slightly forward. Changing the amount each lever is pulled — forward or back, ch
Краткое содержание страницы № 19
Attaching a Trailer The maximum weight of a towed trailer should be less A than 200 lbs (91 kg). Secure the trailer with an appropri- ately sized clevis pin (A, Figure 9) and clip (B). Excessive towed loads can cause loss of traction and loss of control on slopes. Reduce towed weight when B operating on slopes. The surface being driven on greatly impacts traction and stability. Wet or slippery surfaces can greatly reduce traction and the ability to stop or turn. Carefully evaluate the surf
Краткое содержание страницы № 20
Maintenance Maintenance Chart RIDER AND MOWER ENGINE Every 8 Hours or Daily First 5 Hours Check safety interlock system Change engine oil Clean debris off rider and mower deck Every 8 Hours or Daily Clean debris from engine compartment Check engine oil level Every 25 Hours or Annually * Every 25 Hours or Annually * Check tire pressure Clean engine air filter and pre-cleaner ** Check mower blade stopping time Every 50 Hours or Annually * Check rider and mower for loose hardware Change engine oil
