Краткое содержание страницы № 1
’
Operator s Manual
S150XT Series
Zero-Turn Riding Mowers
Model Description
5900514 S150XTKAV2048 48” Mower Deck
5900508 S150XTKAV2252 52” Mower Deck
5900596 S150XTKAV2652 52” Mower Deck
5900564 S150XTKAV2452 52” Mower Deck
5900573 S150XTB2648 48” Mower Deck
5900574 S150XTB2852 52” Mower Deck
5901208 S150XTKAV2448 48” Mower Deck
This manual is available in Spanish. For a copy, contact your Snapper Pro dealer or www.snapperpro.com.
Este manual está disponible en Español. Para obtener una copia,
Краткое содержание страницы № 2
SAMPLE SAMPLE Thank you for purchasing this quality-built SNAPPER PRO product. We’re pleased that you’ve placed your confidence in the SNAPPER PRO brand. When operated and maintained according to the instructions in this manual, your SNAPPER PRO product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with this machine and how to avoid them. This machine is designed and intended to be used and maint
Краткое содержание страницы № 3
Table of Contents Regular Maintenance ................................................25 Operator Safety ...........................................................2 Maintenance Schedule .........................................25 Safety Rules and Information .................................2 Service Air Filter ...................................................25 Safety Decals ........................................................11 Engine Maintenance ........................................
Краткое содержание страницы № 4
Operator Safety Operating Safety Congratulations on purchasing a superior-quality piece of lawn and garden equipment. Our products are designed and manufactured to meet or exceed all industry standards for safety. Do not operate this machine unless you have been trained. Reading and understanding this operator’s manual is a way to train yourself. Power equipment is only as safe as the operator. If it is misused, or not properly maintained, it can be dangerous! Remember, you are respon
Краткое содержание страницы № 5
Operator Safety Slope Operation Operation on slopes can be dangerous. Using the unit on a slope that is too steep where you do not have adequate wheel traction (and control) can cause sliding, loss of steering, control, and possible rollover. You should not operate on a slope greater than a 5.4 foot rise over a 20 foot length (15 degrees). Always mow across slopes, not up and down (to maintain traction on the wheels) and avoid sudden turns or rapid speed changes. Reduce speed and use ext
Краткое содержание страницы № 6
Operator Safety Roll Bar Use Keep the roll bar in the raised position and fasten the seat belt. There is no roll over protection when the roll bar is down! Do not jump off if the mower tips (it is safer to be secured by the seat belt with the roll bar raised.) Lower the roll bar only when necessary (such as to temporarily clear a low overhanging obstacle) and NEVER remove it. Do NOT use the seat belt when the roll bar is down. Raise the roll bar as soon as clearance permits. Retaining
Краткое содержание страницы № 7
Operator Safety Fuel and Maintenance Always disengage all drives, shutoff the engine, and remove the key before doing any cleaning, refueling, or servicing. Gasoline and its vapors are extremely flammable. Do not smoke while operating or refueling. Do not add fuel while engine is hot or running. Allow engine to cool for at least 3 minutes prior to adding fuel. Do not add fuel indoors, in an enclosed trailer, garage, or any other enclosed area that is not well ventilated. Gasoline spills
Краткое содержание страницы № 8
Operator Safety Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text signifies important cautions or warnings which must be followed. 2. Mow only in the daylight or with good artificial TRAINING light, keeping away from holes and
Краткое содержание страницы № 9
Operator Safety 23. Use care when approaching blind corners, shrubs, 5. Use extra care with grass catchers or other trees or other objects that may obscure vision. attachments. These can change the stability of 24. To reduce fire hazard, keep unit free of grass, the unit. leaves & excess oil. Do not stop or park over dry 6. Keep all movement on the slopes slow and leaves, grass or combustible materials. gradual. Do not make sudden changes in speed or direction. 7. See your authorize
Краткое содержание страницы № 10
Operator Safety where there is an open flame, such as in a water EMISSIONS heater. Allow unit to cool before storing. 1. Engine exhaust from this product contains 5. Shut off fuel while storing or transporting. Do not chemicals known, in certain quantities, to cause store fuel near flames or drain indoors. cancer, birth defects, or other reproductive harm. 6. Keep all hardware, especially blade attachment 2. Look for the relevant Emissions Durability Period bolts, tight and keep all
Краткое содержание страницы № 11
Operator Safety leaks. Make sure all hydraulic fluid connections To maintain operator roll over protection and roll bar are tight and all hydraulic hoses and lines are in effectiveness: good condition before applying pressure to the � If a ROLL BAR becomes damaged for any reason, system. If leaks occur, have the unit serviced such as a collision, roll over or impact, the ROLL immediately by your authorized dealer. BAR must be replaced. Small undetectable 26. WARNING: Stored energy de
Краткое содержание страницы № 12
Operator Safety INSPECT BUCKLE WARNING & LATCH Failure to properly inspect and maintain the seat belt can cause serious injury or death. INSPECTION AND MAINTENANCE OF THE ROLL BAR SEAT BELT � The seat belt like the ROLL BAR, needs to be periodically inspected to verify that the integrity has not been compromised through normal machine use, misuse, age degradation, INSPECT WEBBING modifications, or a roll over. If the seat belt does not pass all of the following tests, it should be repl
Краткое содержание страницы № 13
Operator Safety Safety Decal Locations Before operating your unit, read the safety decals. The A cautions and warnings are for your safety. To avoid a personal injury or damage to the unit, understand and follow all safety decals. WARNING If any safety decals become worn or damaged, B C and cannot be read, order replacement decals from your local dealer. A D E C F B B D * D * G ** G ** G F E * Located under seat on pump guard. ** Located behind the ROPS on the frame of the uni
Краткое содержание страницы № 14
Operator Safety Safety Alert Symbol & Signal Words The alert symbol is used to identity safety Safety Interlock System information about hazards that can result in personal injury. A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate This unit is equipped with safety interlock switches. the likelihood and the potential severity of the injury. These safety systems are present for your safety, In addition, a hazard icon may be used to represent do not a
Краткое содержание страницы № 15
Features & Controls Safety Icons Features & Controls Control Functions A B C D The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for E F G H various tasks see the OPERATION section. I J K L M N O P Callout Description A Alert B Read the Manual C Amputation - Rotating Parts D Pinch Point E Fir
Краткое содержание страницы № 16
Features and Controls Note: The further a lever is moved away from the Choke neutral position the faster the drive wheel will turn. Close the choke for cold starting. Open the choke See the Operation section for proper steering once the engine starts. A warm engine may not instructions. require choking. Pull the knob UP to close the choke. Fuel Tank Cap Push to knob DOWN to open the choke. To remove the cap, turn counterclockwise. Hour Meter Fuel Level Gauge The hour meter measures t
Краткое содержание страницы № 17
Operation Operation WARNING General Operating Safety Never operate on slopes greater than 15°. Before first time operation: Select slow ground speed before driving onto � Be sure to read all information in the Safety and a slope. Use extra caution when operating on Operation sections before attempting to operate slopes with a rear-mounted grass catcher. this tractor and mower. Mow across the face of slopes, not up and � Become familiar with all of the controls and how to down, use cautio
Краткое содержание страницы № 18
Operation Check Tire Pressures Tire pressure should be checked periodically, and maintained at the levels shown in the chart. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life. Tire Pressure Fits Models: psi bar Rear 15 1,03 All Figure 1. Checking Tire Pressure Front 25 1,72 Models with pneumatic tires Front N/A Models with flat free tires Seat
Краткое содержание страницы № 19
Operation Foot Pedal Adjustment B A The deck lift foot pedal can be adjusted to C accommodate the operator’s height for optimal comfort. To adjust pedal position: D 1. Remove the foot pedal (A, Figure 4) from the pedal mount tab (B). 2. Remove the pedal mount hardware (C) and rotate the tab 180 degrees. 3. Reinstall the pedal mount hardware and tighten securely. 4. Reinstall the foot pedal on the pedal mount tab in Figure 4. Foot Pedal Adjustment the proper orientation as shown in Fig
Краткое содержание страницы № 20
Operation Starting the Engine Pushing the Rider By Hand NOTICE WARNING If you do not understand how a specific control DO NOT TOW RIDER functions, or have not yet thoroughly read the Towing the units will cause hydraulic transaxle FEATURES & CONTROLS section, do so now. and wheel motor damage. Do not use another Do NOT attempt to operate the tractor without vehicle to push or pull this unit. first becoming familiar with the location and function of ALL controls. 1. Disengage the PTO, eng