Краткое содержание страницы № 1
OPERATOR’S MANUAL OPERATOR’S MANUAL
OPERATOR’S MANUAL
OPERATOR’S MANUAL OPERATOR’S MANUAL
MODEL GC-STWC-61V
THIS MANUAL CONTAINS THE OPERATING
INSTRUCTIONS AND SAFETY INFORMA-
TION FOR YOUR SCAG ACCESSORY. READ-
ING THIS MANUAL WILL PROVIDE YOU
WITH MAINTENANCE AND ADJUSTMENT
PROCEDURES TO KEEP YOUR ACCESSORY
PERFORMING TO MAXIMUM EFFICIENCY.
THE SPECIFIC MODELS THAT THIS BOOK
COVERS ARE CONTAINED ON THE INSIDE
COVER. BEFORE OPERATING YOUR MA-
CHINE, PLEASE READ ALL THE INFORMA-
TION ENCLOSE
Краткое содержание страницы № 2
WARNING FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT IN SERIOUS INJURY. * Keep all safety shields in place. * Before performing any maintenance or service, stop the machine and remove the spark plug wire. * If a mechanism becomes clogged, stop the engine before cleaning. * Keep hands, feet and clothing away from power-driven parts. * Read this manual completely as well as the Operator's Manual that came with your mower. * Keep others off the tractor (only one person at a
Краткое содержание страницы № 3
1.1 INTRODUCTION A replacement manual is available from your This manual has been prepared to provide the authorized Scag Service Dealer or by contacting: information you need to correctly assemble, operate, Scag Power Equipment, Service Department at P.O. and maintain this grass catcher. Read it carefully and Box 152, Mayville, WI 53050. You may also contact keep it for future reference. us through our website at www.scag.com. The manual for this grass catcher can be downloaded by The replac
Краткое содержание страницы № 4
3.1 ASSEMBLY INSTRUCTIONS FOR 61" 4. Install the grass catcher pulley onto the spindle CUTTER DECK assembly. Apply loctite to both pulley setscrews and tighten. See Figure 3-1. -NOTE- Use the illustrated parts list as a part number 5. Remove the "Custom-Cut" and "Turbo" baffles from the cutter deck. Using the original reference when following the assembly instructions. hardware, install the new "Front" and "Turbo" baffles. See Figure 3-2. 1. Remove all packaging materials. Lay out the mount
Краткое содержание страницы № 5
7. Install the blower assembly to the mounting 12. Install the hopper mounting brackets to the bracket and secure with the mounting pin. outside of the frame on the rear of the machine. See Figure 3-4. See Figure 3-6. Hopper 8. Align the blower assembly with the discharge Mounting Brackets opening of the cutter deck. Tighten the hardware for the mounting bracket. See Figure 3-4. Rear Frame 9. Install the quick pin through the rear hole in the Figure 4 A GC-STT Install Art discharge chute mount
Краткое содержание страницы № 6
17. Install one 7/16-14 x 1-3/4" hex head bolt into ADAPTER each of the four mounting holes in the weight support bar, and through the matching holes in BLOWER the caster support weldment. Secure this ASSEMBLY assembly to the front of the machine using the QUICK PIN 7/16 - 1/2" x 1-1/4" x .083" flatwashers, and the 7/16-14 elastic stop nuts. Torque hardware to PIN & HAIR PIN 59 ft. lbs. See Figure 3-8. MOUNTING BRACKET RIGHT SIDE OF CUTTER DECK SHOWN 2006 GC-STC-V removal art 1 (Note: Some
Краткое содержание страницы № 7
WARNING WARNING DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING KIT, OR ENTIRE GRASS CATCHER INSTALLED 7. Re-install the side discharge chute to the opening on the cutter deck. Replace the two outside mounting bolts on the discharge chute with the clevis pins (p/n 04064-15) and rue cotter pins (p/n 04069-03). See Figure 4-3. 8. Re-install the cutter deck belt cover. DISCHARGE CHUTE CLEVIS PIN P/N 04064-15 CLEVIS PIN P/N 04064-15 RUE COTTER PIN GC-STC-V removal art 3 P/N 04069-03 FIGURE 4-3 5
Краткое содержание страницы № 8
MAINTENANCE 5.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS HOURS Break-In 8 20 40 100 200 500 Procedure Comments (First 10) X Check all hardware for tightness X Inspect hose and adapter X Check belt for proper alignment X Inspect fabric bags X *Check screen in hopper Remove debris from screen X Inspect hose and adapter X Inspect fabric bags X Check condition of blower X *Apply grease to blower bearings See figure below X Check belt for proper alignment * Perform these maintenance procedu
Краткое содержание страницы № 9
NOTES 7
Краткое содержание страницы № 10
WARNING INSTALL BELT COVER BEFORE OPERATING MACHINE READ OPERATOR'S MANUAL DANGER ROTATING BLADES AND BLOWER Stop engine before cleaning or removing DO NOT OPERATE MOWER UNLESS GRASS CATCHER OR DISCHARGE GUARD IS INSTALLED GC-STWC-61V BLOWER HOUSING ASSEMBLY 9 10 11 8 12 45 48 4 1 2 14 3 13 11 9 11 7 10 47 10 14 44 27 14 12 11 15 43 16 42 14 17 26 41 39 40 18 34 15 19 14 25 17 28 35 20 21 41 38 22 17 35 27 23 5 24 46 14 24 14 29 6 30 33 32 37 31 31 35 35 2006 GC-STWC-61V Blower Assembly 35 35 34
Краткое содержание страницы № 11
GC-STWC-61V BLOWER HOUSING ASSEMBLY Ref. Part Ref. Part No. Number Description No. Number Description 1 04067-10 Pin, Ring 2-1/4" Long 27 04019-04 Nut, Serr. Flange 3/8-16 2 481547 Lanyard, Deck Height Pin 28 04001-136 Bolt, Hex Head 3/8-16 x 1-1/2 Gr. 8 3 04066-04 Quick Pin, 5/16" Dia. 29 483037 Decal, Danger 4 04001-21 Bolt, Hex Head 3/8-16 x 1-3/4" 30 461931 Blower Housing Weldment 5 481377 Decal, Blower 31 04003-12 Bolt, Carr. 5/16-18 x 3/4" Gr. 5 6 482080 Decal, Rotating Blower
Краткое содержание страницы № 12
GC-STWC-61V" BLOWER MOUNTING COMPONENTS UNDER SIDE OF VELOCITY-PLUS CUTTER DECK SHOWN 16 16 10 10 11 5 23 2 26 27 23 25 4 6 28 1 7 24 8 3 25 26 25 6 24 13 9 12 21 14 15 22 15 20 16 18 17 19 RIGHT SIDE OF CUTTER DECK SHOWN 2006 GC-STC-V BMC 10
Краткое содержание страницы № 13
GC-STWC-61V" BLOWER MOUNTING COMPONENTS Ref. Part No. Number Description 1 483227 Belt Cover, GC-61V 2 04029-04 Wingnut, Plastic 3/8" Small 3 483223 Cap, Square Vinyl 4 04021-08 Nut, Elastic Stop 1/4-20 5 461723 Adapter, Blower GC-STC, includes item #7 6 04040-14 Flatwasher, 1/4-.312 x .750 x .065 7 48137-04 Rubber Strap 7-3/4" 8 04001-59 Bolt, Hex Head 1/4-20 x 1-1/4" 9 481625-01 Knob W/Stud, 3/8-16 x 1-1/4" 10 04064-15 Clevis Pin, 5/16 x 1-1/2" 11 04069-03 Pin, Rue Cotter 5/16 Dia. 12 04067-10
Краткое содержание страницы № 14
GC-STWC-61V BUCKET SUPPORT COMPONENTS (UPPER) 3 36 37 35 1 6 4 2 5 9 3 11 8 4 33 33 5 23 16 21 22 9 21 16 13 23 32 5 18 31 19 13 9 16 5 18 20 16 16 14 24 5 11 4 5 38 9 16 35 25 17 31 9 34 15 27 30 32 29 26 28 12 40 10 39 7 12
Краткое содержание страницы № 15
GC-STWC-61V BUCKET SUPPORT COMPONENTS (UPPER) Ref. Part No. Number Description 1 423302 Screen, Catcher Hood 2 04090-02 Pop Rivet, 3/16 x .652 3 04041-19 Flatwasher, 3/16-.196 x .469 x .048 4 04001-32 Bolt, Hex Head 3/8-16 x 1-1/4" 5 04041-01 Flatwasher, 3/8-.391 x .938 x .105 6 461408 Hood Assembly, GC-STT (includes items 1, 2 & 3 and items 2 & 15 on page 15) 7 04001-117 Bolt, Hex Head 7/16-14 x 1-3/4" 8 423258 Hinge, Upper LH 9 04021-09 Nut, Elastic Stop 3/8-16 10 04040-11 Flatwasher, 7/1
Краткое содержание страницы № 16
FRAME GC-STWC-61V BUCKET SUPPORT COMPONENTS (LOWER) 1 2 24 22 23 21 18 "A" 20 19 3 4 5 17 6 16 11 7 15 TO "A" 4 13 4 4 5 8 6 14 7 12 3 4 8 6 9 6 5 4 STC 2002 BSC 9 10 10A 14
Краткое содержание страницы № 17
GC-STWC-61 BUCKET SUPPORT COMPONENTS (LOWER) Ref. Part No. Number Description 1 04090-02 Pop Rivet, 3/16 x .652 2 482321 Seal, Hood 3 423262 Tube, Upright 4 04041-07 Flatwasher, 3/8-.391 x .938 x .105 5 04021-09 Nut, Elastic Stop 3/8-16 6 04020-04 Nut, 3/8-16 7 04021-05 Hex Lock Nut, 3/8-16 8 04067-07 Pin, Ring 1/2 x 2-1/4" 9 04001-19 Bolt, Hex Head 3/8-16 x 1" 10 451726 Mounting Bracket Weldment RH 10A 451725 Mounting Bracket Weldment LH 11 04021-02 Lock Nut, 1/4-20 Center 12 04001-46 Bolt, Hex
Краткое содержание страницы № 18
GC-STC DECALS 482871 482871 482275 MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING PATENTS: 4,487,006 4,885,903 4,920,733 4,967,543 4,991,382 4,998,948 5,042,239 5,118,617 5,133,176 5,826,416 5,832,708 5,865,018 6,192,666 6,766,633 6,892,519 PATENTS PENDING 483044 481327 481377 483037 482080 482080 16
Краткое содержание страницы № 19
LIMITED WARRANTY- COMMERCIAL ACCESSORY Any part of the Scag commercial accessory manufactured by Scag and found, in the reasonable judgment of Scag, to be defective in material or workmanship, will be repaired or replaced by an Authorized Scag Service Dealer without charge for parts and labor. The Scag accessory, including any defective part, must be returned to an Authorized Scag Service Dealer within the warranty period. The expense of delivering the accessory to the dealer for warranty work
Краткое содержание страницы № 20
© 2005 PART NO. 03179 SCAG POWER EQUIPMENT PRINTED 8-2005 DIVISION OF METALCRAFT OF MAYVILLE, INC. PRINTED IN USA WWW.SCAG.COM
