Краткое содержание страницы № 1
LT120
Owner’s Manual
Краткое содержание страницы № 2
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION III. CHILDREN • Read, understand, and follow all instructions in the manual Tragic accidents can occur if the operator is not alert to the and on the machine before starting. presence of children. Children are often attracted to the
Краткое содержание страницы № 3
CONGRATULATIONS on your purchase of a new tractor. PRODUCT SPECIFICATIONS It has been designed, engineered and manufactured to HORSEPOWER: 12.0 give you the best possible dependability and performance. GASOLINE CAPACITY 2 GALLONS Should you experience any problem you cannot easily AND TYPE: UNLEADED REGULAR remedy, please contact your nearest authorized service center/department. We have competent, well-trained tech- OIL TYPE (API-SF/SG): SAE 30 (above 32°F) nicians and the proper tools to ser
Краткое содержание страницы № 4
TABLE OF CONTENTS SAFETY RULES ............................................................ 2 MAINTENANCE SCHEDULE ...................................... 14 PRODUCT SPECIFICATIONS ...................................... 3 SERVICE AND ADJUSTMENTS............................19-23 CUSTOMER RESPONSIBILITIES .....................3, 14-17 STORAGE ................................................................... 24 ASSEMBLY ................................................................6-8 TROUBLESHO
Краткое содержание страницы № 5
CONTENTS OF HARDWARE PACK Parts Bag contents shown full size (1) Lock (1) Wing Nut 3/8 Washer 3/8 (1) Washer 13/32 x 1-1/4 x 16 Gauge Parts packed separately in carton (1) Large Flat Washer (1) Hex Bolt 3/8-16 x 1 Seat Steering Wheel Mulcher Plate Steering Boot (1) Lockwasher 3/8 Manual (1) Locknut 5/16-18 (1) Hex Bolt 5/16-18 x 1-1/4 Parts Bag (1) Shoulder Bolt (1) Hex Bolt 5/16-18 Parts bag contents not shown full size 1/2-13 x 1 Steering Wheel Insert Steering Wheel (1) Lock Adapter
Краткое содержание страницы № 6
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY STEERING WHEEL INSERT A socket wrench set will make assembly easier. Standard wrench sizes are listed. 3/8 HEX BOLT 3/8 LOCK WASHER (2) 7/16" wrenches Tire pres
Краткое содержание страницы № 7
ASSEMBLY • First connect RED battery cable to positive (+) terminal with hex bolt, flat washer, lock washer and hex nut as SEAT shown. Tighten securely. • Connect BLACK grounding cable to negative (-) termi- SEAT PAN nal with remaining hex bolt, flat washer, lock washer and hex nut. Tighten securely. SHOULDER • Close battery box door. BOLT Open battery box door for: • Inspection for secure connections (to tighten hard- ware). • Inspection for corrosion. • Testing battery. • Jumping (if require
Краткое содержание страницы № 8
ASSEMBLY CHECK BRAKE SYSTEM DEFLECTOR After you learn how to operate your tractor, check to see SHIELD that the brake is properly adjusted. See “TO ADJUST FLAT BRAKE” in the Service and Adjustments section of this WASHER manual. LOCK HANG WASHER TAB 3 CHECKLIST BEFORE YOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT. PLEASE REVIEW THE FOLLOWING CHECKLIST: 3 All assembly instructions have been completed. 3
Краткое содержание страницы № 9
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ON ENGINE OFF OIL PRESSURE CLUTCH LIGHTS ON LIGHTS OFF FUEL CHOKE MOWER HEIGHT DIFFERENTIAL PARKING BRAKE UNLOCKED LOCK LOCKED P REVERSE NEUTRAL HIGH LOW PARKING BRAKE MOWER LIFT ATTACHMENT ATTACHMENT IGNITION CLUTCH ENGAGED CLUTCH DISENGAGED HYDROSTATIC FREE WHEEL DANGER, KEEP HANDS AND FEET AWAY (Hydro Mo
Краткое содержание страницы № 10
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. ATTACHMENT LIGHT IGNITION CLUTCH LEVER SWITCH SWITCH POSITION CLUTCH/BRAKE PEDAL LIFT LEVER PLUNGER ATTACHMENT LIFT LEVER HEIGHT ADJUST POSITIONS PARKING BRAKE THROTTLE/CHOKE CONTROL GEARSHIFT LEVER FIG. 7 Our tractors conform to the sa
Краткое содержание страницы № 11
OPERATION WEAR YOUR The operation of any tractor can result in foreign objects thrown into the eyes, which SAFETY GLASSES can result in severe eye damage. Always wear safety glasses or eye shields while FORESIGHT IS BETTER operating your tractor or performing any adjustments or repairs. We recommend a wide THAN NO SIGHT vision safety mask over the spectacles or standard safety glasses. NOTE: Under certain conditions when tractor is standing HOW TO USE YOUR TRACTOR idle with the engine ru
Краткое содержание страницы № 12
OPERATION TO TRANSPORT TO OPERATE MOWER (See Fig. 9) • Raise attachment lift to highest position with attach- Your tractor is equipped with an operator presence sens- ment lift control. ing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged • When pushing or towing your tractor, be sure gearshift will shut off the engine. lever is in neutral (N) position. • Select desired height of cut. • Do not push or tow tractor at more than five
Краткое содержание страницы № 13
OPERATION • Depress clutch/brake pedal and set parking brake. • Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to • Place gear shift lever in neutral (N) position. dry before mowing. • Move attachment clutch to “DISENGAGED” position. • Always operate engine at full throttle when mowing to • Move throttle control to choke ( ) position. assure better mowing performance and proper dis- charge of material. Regulate ground speed by select- Not
Краткое содержание страницы № 14
CUSTOMER RESPONSIBILITIES MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation 4 4 Check Tire Pressure 4 4 T Check for Loose Fasteners 4 7 4 4 R Sharpen/Replace Mower Blades 4 4 A Lubrication Chart 4 4 C Check Battery Level/Recharge 6 4 T Clean Battery and Terminals 0 4 4 R Check Transaxle Cooling 4 Adjust Blade Belt(s) Tension 4 5 Adjust Motion Drive Belt(s) Tension 4 5 Check Engine Oil Level 4 4 Change Engine Oil 4 4 1 1,2,3 4 Clean Air Filter
Краткое содержание страницы № 15
CUSTOMER RESPONSIBILITIES TO SHARPEN BLADE (See Fig. 13) TRACTOR Care should be taken to keep the blade balanced. An Always observe safety rules when performing any mainte- unbalanced blade will cause excessive vibration and even- nance. tual damage to mower and engine. BRAKE OPERATION • The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower. If tractor requires more than six (6) feet stopping distance • To check blade balance, you will need
Краткое содержание страницы № 16
CUSTOMER RESPONSIBILITIES V-BELTS OIL FILL CAP/DIPSTICK Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. TRANSAXLE COOLING Keep transaxle free from build-up of dirt and chaff which can restrict cooling. ENGINE OIL DRAIN PLUG LUBRICATION Only use high quality detergent oil rated with API service FIG. 14 classification SF or SG. Select the oil’s SAE viscosity grade according
Краткое содержание страницы № 17
CUSTOMER RESPONSIBILITIES MUFFLER COVER KNOB Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage. CARTRIDGE NUT SPARK PLUGS COVER Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever PAPER occurs first. Spark plug type and gap setting are shown in CARTRIDGE “PRODUCT SPECIFICATIONS” on page 3 of this manual. FOAM PRE-CLEANER IN-LINE FUEL FILTER (See Fig. 17) The fuel filter sh
Краткое содержание страницы № 18
SERVICE AND ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: • Depress clutch/brake pedal fully and set parking brake. • Place gearshift lever in neutral (N) position. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key “OFF” and remove key. • Make sure the blades and all moving parts have completely stopped. • Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TRACTOR CLUTCH ROD CLUTCH LEVER TO REMOVE MOWE
Краткое содержание страницы № 19
SERVICE AND ADJUSTMENTS FRONT-TO-BACK ADJUSTMENT (See Figs. 21 and 22) TO LEVEL MOWER HOUSING IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF Adjust the mower while tractor is parked on level ground or THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS driveway. Make sure tires are properly inflated (See NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS “PRODUCT SPECIFICATIONS” on page 3 of this manual). EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO- If tires are over or underinflated, you will not properly a
Краткое содержание страницы № 20
SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT WITH PARKING BRAKE “ENGAGED” (See Fig. 23) The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake. 1-1/2" BELT REMOVAL - • Place attachment clutch in “DISENGAGED” position. NUT “A” • Move attachment lift lever forward to lower mower to its lowest position. JAM NUT • Roll belt off engine pulley. • Disconnect R.H. suspension arm from rear deck bracket by removing retainer spring. •
