Краткое содержание страницы № 1
Operator´s manual
Rider 11 Rider 13
Rider 11 Bio Rider 13 Bio
Please read these instructions carefully and make sure
you understand them before using the machine. English
Краткое содержание страницы № 2
Svenska – 31 Sve-5 225/232/235 Bruk 31 97-11-25, 08.46
Краткое содержание страницы № 3
CONTENTS Operator’s Manual for Rider 11 and Rider 13 Rider 11 Bio and Rider 13 Bio Maintenance schedule ................................... 21 Introduction ......................................................... 2 Dismantling of the machine hoods ................. 22 Driving and transport on public roads .............. 2 Checking and adjusting the steering wires .... 24 Towing .............................................................. 2 Checking and adjusting the brakes ................ 25
Краткое содержание страницы № 4
INTRODUKTION Dear customer Thank you for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a front- mounted cutting unit and a patented rear-wheel steering system. Riders are designed for maximum efficiency even in small or confined areas. The closely grouped controls and pedal-operated hydrostatic transmission (certain models) also contribute to the performance of this machine. We hope you will find this operator’s manual very useful. By following its instructions (
Краткое содержание страницы № 5
SAFETY INSTRUCTIONS Good service Husqvarna products are sold all over the world and only through servicing dealers. This is to ensure that you, the customer, get the best support and service. Before the machine is delivered it undergoes inspection and is adjusted by your dealer. When you need spare parts or advice on service issues, warranty terms, etc., contact: Engine Transmission This Operator’s Manual belongs to machine with serial number: Serial number The serial number can be found on the
Краткое содержание страницы № 6
EXPLANATION OF SYMBOLS These symbols are on the machine and in the operator’s manual. Study them carefully so that you know what they mean. Read the operator’s manual N R Reverse Neutral Fast Slow Engine off Battery Choke Fuel Oil pressure Cutting height Backwards Forwards Ignition Hydrostatic free wheel Clutch out Parking brake Brake Clutch Warning Use hearing protection Clutch in Noise emission to surround- Warning! Rotating blades. Warning! Risk that the Never drive across CE conformity ma
Краткое содержание страницы № 7
SAFETY INSTRUCTIONS Safety instructions These instructions are for your safety. Read them carefully. WARNING! The inserted symbol means that important safety instructions need to be observed. It applies to your safety. General use • Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them. • Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety d
Краткое содержание страницы № 8
SAFETY INSTRUCTIONS • Take care when rounding a fixed object, so that WARNING! the blades do not hit it. Never run the machine Engine exhaust, some of its over foreign objects. constituents and certain vehicle • Only use the machine in daylight or in other components contain or emit chemicals considered to cause well-lit conditions. Keep the machine at a safe cancer, birth defects or other distance from holes or other irregularities in the reproductive impairment. The ground. Pay attention to ot
Краткое содержание страницы № 9
SAFETY INSTRUCTIONS Driving on slopes Driving on slopes is one of the operations where the risk of the driver losing control of the machine or of it overturning is the greatest; this can result in serious injury or death. All slopes demand extra care. If you cannot reverse up a slope or if you feel unsure, do not mow it. Proceed as follows: • Remove obstacles such as stones, branches, etc. • Mow upwards and downwards, not sideways. • Do not use the machine on ground that slopes 6003-004 more tha
Краткое содержание страницы № 10
SAFETY INSTRUCTIONS Children • Serious accidents may occur if you fail to be on your guard for children in the vicinity of the machine. Children are often attracted to the machine and mowing. Never assume that children will remain where you last saw them. • Keep children away from the area to be mowed and under close supervision by another adult. • Keep an eye out and shut off the machine if children enter the work area. • Before and during reversing procedures, look behind you and down for smal
Краткое содержание страницы № 11
SAFETY INSTRUCTIONS • If leaks arise in the fuel system, the engine must not be started until the problem has been resolved. • Store the machine and fuel in such a way that there is no risk that leaking fuel or fumes can cause any damage. • Check the fuel level before each use and leave WARNING! space for the fuel to expand, because the heat The engine and the exhaust from the engine and the sun may otherwise system become very hot during cause the fuel to expand and overflow. operation. • Avoid
Краткое содержание страницы № 12
SAFETY INSTRUCTIONS • Never use the machine indoors or in spaces lacking proper ventilation. Exhaust fumes con- tain carbon monoxide, an odourless, poisonous and highly dangerous gas. • Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting. • Never make adjustments with the engine running. • The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer. • The blades are sharp and can cause c
Краткое содержание страницы № 13
PRESENTATION Rider 11 and Rider 11 Bio has an in-line gearbox Presentation with five forward gears and one reverse gear. Congratulation on your choice of a first-class quality product. On the Rider 13 and Rider 13 Bio the power trans- This manual describes four models that are fitted mission from the engine is handled by a hydrostatic with engines from Briggs & Stratton of 10.5 and gearbox which enables stepless variation of the 12.5 horsepower respectively. speed. 6004-001Hy 6017-213 6 5 4 2 1
Краткое содержание страницы № 14
PRESENTATION RIDER 11 / 11 BIO Throttle and Choke lever The engine speed is adjusted with the throttle control, and thereby also the rotation speed of the blades. The control is also used to activate the choke function. When the choke is used the engine receives a richer mixture of fuel and air, which simplifies cold start. 6004-004 Clutch pedal The clutch pedal disengages the engine and stops forward movement. The blades are not affected by the clutch pedal. 6004-005 Brake pedal / Parking brak
Краткое содержание страницы № 15
PRESENTATION RIDER 13/13 BIO Throttle and Choke lever The engine speed is adjusted with the throttle control, and thereby also the rotation speed of the blades. The control is also used to activate the choke function. When the choke is used the engine receives a richer mixture of fuel and air, which simplifies cold start. 6004-004H Speed limiter The speed of the machine is steplessly regulated 2 1 with two pedals. Pedal (1) is used to drive forwards and pedal (2) for reversing. WARNING! Make sur
Краткое содержание страницы № 16
PRESENTATION Cutting unit Rider 11 and Rider 13 have a cutting unit with rear ejection, i.e. the grass cuttings are thrown out behind the cutting unit. 6004-009Hy Rider 11 Bio and Rider 13 Bio have a twin-blade BioClip cutting unit. 6017-214 Lift lever for cutting unit The lift lever is used to set the cutting unit in trans- port or cutting position. If the lever is pulled back the unit will lift up and the blades will automatically stop rotating (transport position). If the lock button is press
Краткое содержание страницы № 17
PRESENTATION Lever for adjustment of cutting height With this lever the cutting height can be adjusted to 9 different positions. Cutting unit with rear ejection, 40-90 mm BioClip cutting unit, 45-95 mm 6004-013H Rider 13 H Seat The seat has a jointed attachment on the front edge and can be tipped forward. The seat can also be adjusted lengthways. Release the knobs under the seat and adjust it forwards or backwards to the required position. Lock the adjustment with the wheels. 6004-014 Fuelling T
Краткое содержание страницы № 18
DRIVING Before starting • Read the safety instructions and information on the location and function of the controls before starting (see pages 5-15). • Conduct daily maintenance before starting (see maintenance schedule on page 21). Adjust the seat to the required position. Starting the engine 1. Lift up the cutting unit by pulling the lever back- wards to locked position (transport position). 6007-001H 2. Apply the parking brake. This is done as follows: 2 • Press down the brake pedal (1). • Pr
Краткое содержание страницы № 19
DRIVING Cold engine: 4. Push the throttle control to position 3 (choke position). In this position the engine receives a 2 richer mixture so that the engine starts more 1 easily. 3 6007-004H Warm engine: 5. Set the throttle control midway between position 1 and 2. 2 1 3 6007-005H 6. Turn the ignition key to start position. STOP START IMPORTANT INFORMATION Do not run the starter for more than about 5 seconds at a time. If the engine does not start, wait about 10 seconds before trying again. 6007-
Краткое содержание страницы № 20
DRIVING 7. When the engine has started release the igni- tion key to neutral position. Push the throttle control to the required speed. For cutting 3/4 to full throttle. STOP START WARNING! Never run the engine indoors, in enclosed or poorly ventilated areas. The exhaust fumes contain toxic carbon monoxide. 6007-007 Driving the machine 1. Release the parking brake by pressing down the brake pedal. 2. For Rider 13 and Rider 13 Bio Carefully press down one of the pedals until the correct speed is
