Краткое содержание страницы № 1
Envoy 36
CODE
100E
OWNER’S HANDBOOK
Original Version (EN)
ISSUE: 14.06.11 PART NUMBER: 111-5099 (A)
Краткое содержание страницы № 2
CONTENTS Contents 2 Mower Maintenance 10 - 11 - Grassbag 10 Introduction 3 - Deck Housing 10 - Securing Nuts and Bolts 10 Specifications / Main Features 4 - Lubrication 10 - Cutterblade Removal 10 - 11 Safety Precautions 5 - 6 - Cutterblade Sharpening 11 - Safety Alert Symbol 5 - Supply Cable 11 - Training 5 - Storage 11 - Preparation 5 - Safety Symbols 5 - 6 Lawn Care Calendar 12 - Operation 5 - 6 - Maintenance & Storage 6 Trouble Shooting 13 - Control Symbols 6 Warranty 14 Assembling the
Краткое содержание страницы № 3
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you Use of non standard parts or any arbitrary modifications carried out on this machine may gain safe and efficient service from your machine. relieve Hayter Limited of liability for any resulting damage or injury. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it Hayter mowers are robustly constructed and designed for efficient economical perfor- gives essential informa
Краткое содержание страницы № 4
SPECIFICATIONS / MAIN FEATURES Code 100 Motor Supply 230V Rated Input 1.4 kW Cutterblade Speed 2950 rpm Fuse Rating 13A Cutting width 360 mm Cutting height 13 - 60 mm Overall dimensions 1040 x 450 x 1360 mm Weight 22 Kg 1. Handlebar Securing Knob. 4 2. Cable. 3 3. Switch Control Unit. 4. Bail Arm. 5 5. Handlebar. 6. Cable Cleat. 7. Grassbag Assembly. 1 8. Rear Deflector. 6 9. Serial No. Label. 10. Height of Cut Lever. 11. Motor Housing. 2 1 8 1 7 9 11 10 4 5
Краткое содержание страницы № 5
SAFETY PRECAUTIONS Safety Alert Symbol Preparation Operation This safety alert symbol indicates important safety It is recommended that a high sensitivity Residual Current SWITCH OFF AND REMOVE PLUG FROM messages. When you see this symbol be alert to the - Operated Circuit - Breaker (RCCB) with a trip current MAINS BEFORE: possibility of injury. Carefully read the following and of not more than 30mA is installed at the mains socket. - Before clearing blockages or unclogging the inform others.
Краткое содержание страницы № 6
SAFETY PRECAUTIONS necessary when starting. Hayter authorised dealer. Operation cont Always be sure of your footing on slopes. Never lift the rear of the mower. Walk, never run. Never pick up or carry a mower whilst it is running or O connected to the mains supply. Do not mow excessively steep slopes of more than 20 and mow across the face of slopes, never up and down. Do not lift the rear deflector whilst the mower is in operation, particularly when using without a grassbag. Exercise extre
Краткое содержание страницы № 7
ASSEMBLING THE MOWER BEFORE FIRST USE Delivery Checklist Supply Cable Remove the mower from the packaging and check that Route the supply cable loosely across to the cable cleat the following items have been supplied correctly. If any on the left side of the handlebar. Make a loop in the items are missing, contact your local Hayter dealer. supply cable and secure to the cable cleat. (Refer fig.4) 1. Motor Handbook. 5. Warranty Reg Card. 2. Grassbag Frame. 6. Supply Cable. 3. Grassbag Top Cover
Краткое содержание страницы № 8
OPERATING THE MOWER two cuts when the grass is long. (Refer fig.8) Electrical Connection Turning Position the mower on the grass area to be cut. Care- To make a wide turn steer the mower with the handlebar fully uncoil the supply cable clear of the mower. Ensure in the direction required. Before Mowing that the mains socket is switch ‘OFF’ before connecting. To make a tight turn apply downward pressure on the To prevent accidents, thoroughly inspect the area Switch ‘ON’. handlebar to raise
Краткое содержание страницы № 9
OPERATING THE MOWER this could lead to hazardous situation. chute and remove any blockage. Turn the machine on Heavy Growth Plan a ‘cutting scheme’ which works away from the its side and clear the obstruction from the cutterblade Areas of heavy growth should be mown without power supply point and ensures that the cable is trailed and the underside of the mower deck. Place the machine collecting the clippings. If collection is required, first out over the cut area. Work up and down the lawn
Краткое содержание страницы № 10
MAINTENANCE SCHEDULE / MOWER MAINTENANCE edges facing towards the motor before locating onto Deck Housing Maintenance Schedule the two carrier pins. Secure the cutterblade fixing nylon Remove grass debris from the top and underside of the Follow the hourly or calendar intervals, whichever occurs bolt and tighten to the specified torque of 20Nm. (Refer deck housing immediately after use. (Refer fig.14) first. More frequent service will be required if working fig.15) for prolonged periods un
Краткое содержание страницы № 11
MOWER MAINTENANCE ageing. Replace immediately if defective. Rest the mower deck on wooden blocks to remove Cutterblade Removal cont the weight of the mower from its wheels/roller. (Refer Replace the cutterblade every 2 years or sooner or fig.19) excessively worn or damaged. Storage To prevent injury it is wise to seek assistance when To collapse the handlebar, first unscrew the two top secur- CAUTION - PREVENT ENVIRONMENTAL turning the mower on its side. ing knobs to allow the top section o
Краткое содержание страницы № 12
LAWN CARE CALENDAR To be used as a guide only January June October There is very little work to do this month apart from Summer mowing should now be under way. It should be Rake out the thatch from the turf and spike the lawn to brushing away leaves. Keep off the grass if frozen or necessary to mow the lawn twice a week. Raking before assist in drainage. Brush in peat and sharp sand. waterlogged. mowing is important this month as the combined action keeps runners of clover under control. Water
Краткое содержание страницы № 13
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Motor fails to start 1. Mains supply socket dead 1. Test socket by plugging in Discharge chute blocks 1. Grass is wet 1. Mow dry grass another appliance 2. Cut height too low 2. Increase cut height 2. RCCB tripped 2. Remove mower plug and 3. Grassbag full 3. Empty grassbag check RCCB action. Check the 4. No airflow through the grass- 4. Clean the grassbag supply cable for any obvious bag signs of damage and replac
Краткое содержание страницы № 14
NOTES WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material or workmanship under normal use for a period of two years from the date of purchase. To qualify for the full benefit of the warranty, the warranty registration card must be returned to Hayter Limited within 14 days of purchase. If the selling dealer has not returned the Warranty Registration Card, please complete and return. Subject to the conditions a
Краткое содержание страницы № 15
NOTES NOTES 15
Краткое содержание страницы № 16
CUSTOMER INFORMATION SERVICE RECORD CODE SERIAL NO. 1st Y ear (12 months ) 1st Y ear (12 months ) Owner ’s Name : We certify t hat this service h as been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Motor Type:- Date of Sale:- Your Local Dealer:- Note for dealer : Please retain this voucher for your records. 2nd Y ear (24 months ) 2nd Y ear (24 months ) Owner ’s Name : We certify t hat this service has been
