Краткое содержание страницы № 1
Owner's Manual
CRAFTSMAN °
ROTARY LAWN MOWER
675 Series Briggs & Stratton Engine
Power-Propelled
22" Multi-Cut
Model No.
917.376407
• Espa_ol, p. 20
CAUTION'.
Read and follow all
Safety Rules and Instructions
before operating this equipment
U.S.A.
IL 60179
Sears, Roebuck and Co., Hoffman Estates,
Visit our Craftsman website: www.sears.com/craftsman
Краткое содержание страницы № 2
Maintenance ...................................... 12-15 Warranty ................................................... 2 Safety Rules .......................................... 2-4 Service and Adjustments ................... 16-17 Product Specifications .............................. 4 Storage .............................................. 17-18 Troubleshooting ................................. 18-19 Assembly / Pre-Operation ........................ 6 Operation ...................................
Краткое содержание страницы № 3
I. GENERAL OPERATION . Always wear safety goggles or safety glasses with side shields when operating • Read, understand, and follow all mower. instructions on the machine and in the manual(s) before starting. Be thoroughly Ii. SLOPE OPERATION familiar with the controls and the proper Slopes are a major factor related to slip & use of the machine before starting. fa!l accidents which can result in severe in- • Do not put hands or feet near or under jury. All slopes require extra caution. If you r
Краткое содержание страницы № 4
• Never fill containers inside a vehicle, on • Keep nuts and bolts, especially blade a truck or trailer bed with a plastic liner. attachment bolts, tight and keep equip- Always place containers on the ground ment in good condition. away from your vehicle before filling. • Never tamper with safety devices. Check • Remove gas-powered equipment from their proper operation regularly. the truck or trailer and refuel it on the • Keep machine free of grass, leaves, or ground. If this is not possible, t
Краткое содержание страницы № 5
Repair Protection Agreements Congratulations on making a smart pur- • Fast help by phone- phone sup- chase. Your new Craftsman® product is port from a Sears representative on designed and manufactured for years of products requiring in-home repair, plus dependable operation. But like all prod- convenient repair scheduling. ucts, it may require repair from time to Once you purchase the Agreement, a time. That's when having a Repair Protec- simple phone call is all that it takes for you tion Agree
Краткое содержание страницы № 6
Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower. IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tigh
Краткое содержание страницы № 7
KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your lawn mower or in literature supplied with the product. Learn and understand their meaning. CAUTION ENGINE ENGINE FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS OR WARNING ON OFF AND FEET AWAY Drive contro
Краткое содержание страницы № 8
The operationof any SAFETY GLASSES lawn mower can result in foreign objects thrown into the eyes,which can result in severe eye dam- Operator age. Alwayswear safety glassesor eye presence shields while operating your lawn mower control bar or performing any adjustments or repairs. We recommend a standard safety glasses or wide vision safety mask worn over DRIVE CONTROL ENGAGED spectacles. HOW TO USE YOUR LAWN MOWER ENGINE SPEED The engine speed was set at the factory for optimum performance. Spe
Краткое содержание страницы № 9
TO CONVERT MOWER I \ \ Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging: REAR BAGGING • Lift rear door of the lawn mower and Unlock place the grass catcher frame hooks latch onto the grass bag brackets. • To convert to mulching or discharging Open operation, remove grass catcher and I mulcher door close rear door. I door Discharge bracket deflector Grass catcher handle Grass catcher frame hook \ / NOTE: Rear door will remain open until operator pres
Краткое содержание страницы № 10
TO EMPTY GRASS CATCHER _i, CAUTION: Wipe off any spilled oil or 1. Lift up on grass catcher using the fuel. Do not store, spill or use gasoline frame handle. near an open flame. ,A CAUTION: Alcohol blended fuels 2. Remove grass catcher with clippings from under lawn mower handle. (called gasohol or using ethanol or metha- 3. Empty clippings from bag using both nol) can attract moisture which leads to frame handle and bag handle. separation and formation of acids during NOTE: Do not drag the bag
Краткое содержание страницы № 11
MOWING TIPS MULCHING MOWING TIPS CAUTION: Do not use de-thatcher IMPORTANT: For best performance, blade attachments on your mower. Such keep mower housing free of built-up attachments are hazardous, will damage grass and trash. See "CLEANING" in the Maintenance section of this manual. your mower and could void your warranty. • Under certain conditions, such as very • The special mulching blade will recut tall grass, it may be necessary to raise the grass clippings many times and the height of cu
Краткое содержание страницы № 12
EVERY EVERY MAINTENANCE BEFORE AFTER EVERY 25 HOURS 100 BEFORE EAC H EAC H 10 STO RAG E SCHEDULE USE USE HOURS OR SEASON HOURS v' Check for Loose Fasteners _#, v' ,_ Clean / Inspect Grass Catcher * V' Check Tires _V' _ Check Drive Wheels *** Clean Lawn Mower**** v' v' M Clean under Drive Cover *** v' O Check Drive Belt / Pulleys *** v' W Check / Sharpen / Replace Blade v'3 v' _ ubrication Clean and Recharge Battery ** v' v_ Check Engine Oil level vl E Change Engine Oil V_,2 N Clean Air Filter _4
Краткое содержание страницы № 13
LAWN MOWER IMPORTANT: To ensure proper assembly, center hole in blade must align with star Always observe safety rules when per- on blade adapter. forming any maintenance. 3. Be sure trailing edge of blade (opposite TIRES sharp edge) is up toward the engine. • Keep tires free of gasoline, oil, or insect 4. Install the blade bolt with the lock control chemicals which can harm rubber. washer and hardened washer into • Avoid stumps, stones, deep ruts, sharp blade adapter and crankshaft. objects and
Краткое содержание страницы № 14
GRASS CATCHER . Remove engine oil cap; lay aside on a clean surface. • The grass catcher may be hosed with 3. Tip lawn mower on its side as shown water, but must be dry when used. and drain oil into a suitable container. • Check your grass catcher often for dam- Rock lawn mower back and forth to re- age or deterioration. Through normal move any oil trapped inside of engine. use it will wear. If catcher needs replac- ing, replace only with approved replace- ment catcher shown in the Repair Parts
Краткое содержание страницы № 15
Back plate CLEANING IMPORTANT: For best performance, keep mower housing free of built-grass and trash. Clean the underside of your mower after each use. ,I&CAUTION" Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. • Clean the underside of your lawn mower Cartridge by scraping to remove build-up of grass Slot and trash. • Clean engine often to keep trash from accumulating. A clogged engine runs Cover hotter and shortens engine life. Cover tab •
Краткое содержание страницы № 16
A WARNING: To avoid serious injury, before performing any service and adjustments: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. LAWN MOWER NOTE: Always use factory approved belt TO ADJUST CUTTING HEIGHT to assure proper fit and long life. See "TO ADJUST CUTTING HEIGHT" in Blade adapter Key Crankshaft the Operation section of this
Краткое содержание страницы № 17
ENGINE to suspected carburetor problems, take your lawn mower to a Sears or other ENGINE SPEED qualified service center for repair and/or Your engine speed has been factory set. adjustment. Do not attempt to increase engine speed IMPORTANT: Never tamper with the or it may result in personal injury. If you engine governor, which is factory set for believe that engine is running too fast or proper engine speed. Overspeeding too slow, take your mower to a Sears or the engine above the factory high
Краткое содержание страницы № 18
ENGINE OIL ENGINE FUEL SYSTEM Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in IMPORTANT: It is important to prevent the Maintenance section of this manual). gum deposits from forming in essential fuel CYLINDER system parts such as carburetor, fuel filter, 1. Remove spark plug. fuel hose, or tank during storage. Alcohol 2. Pour one ounce (29 ml) of oil through blended fuels (called gasohol or using spark plug hole into cylinder. ethanol or methanol) can attract mo
Краткое содержание страницы № 19
PROBLEM CAUSE CORRECTION . Rear of lawn mower Loss of power 1. Raise cutting height. housing or cutting blade dragging in heavy grass. . Cutting too much grass. 2. Raise cutting height. 3. Dirty air filter. 3. Clean/replace air filter. 4. 4. Clean underside of mower Buildup of grass, leaves, and trash under mower. housing. 5. 5. Check oil level. Too much oil in engine. 6. Walking speed too fast. 6. Cut at slower walking speed. Poor cut - 1. Worn, bent or loose blade. 1. Replace blade. Tighten bl
Краткое содержание страницы № 20
Garantia ................................................... Mantenimiento .......................................... 30-33 .... 20 20-22 Servicio y Adjustes ................................... 33-34 Reglas de Seguridad ............................... .... 22 Almacenamiento ....................................... 35-36 Especificaciones del Producto ................. .... 23 Montaje / Pre-Operaci6n ......................... Identificaci6n de problemas ...................... 36-37 24-28 Operaci6n
