Краткое содержание страницы № 1
P Piir ra an nh ha aM MA AX X 1 16 65 5,, 1 17 75 5,, 1 17 76 6ii,, 1 19 95 5c c,, & & 1 19 96 6c cii
IIn ns stta alllla attiio on n a an nd d O Op pe er ra attiio on ns s M Ma an nu ua all
532030-1_A
Краткое содержание страницы № 2
Thank You! Thank you for choosing Humminbird®, the #1 name in Fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® accessory is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® accessory does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate af
Краткое содержание страницы № 3
NOTE: Some features discussed in this manual require a separate purchase, and some features are only available on international models. Every effort has been made to clearly identify those features. Please read the manual carefully in order to understand the full capabilities of your model. NOTE: The illustrations in this manual may not look the same as your product, but your unit will function in the same way. NOTE: To purchase accessories for your control head, visit our web site at humminbird
Краткое содержание страницы № 4
Table of Contents Installation Overview 1 Fixed Control Head Installation 2 Determine Where to Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connect the Power Cable to the Boat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Assemble the Control Head Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Route the Control Head Cables Under the Deck . . . . . . . . . . . . . . . . . . . . . . . . . 5 Attach
Краткое содержание страницы № 5
Table of Contents Moving the Portable Fishfinder 34 Power ON and OFF 35 PiranhaMAX Sonar Technology 36 Single Beam Sonar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Dual Beam Sonar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 What You See on the Display 38 How GPS Works 39 The PiranhaMAX Control Head 40 Key Functions 41 POWER/MENU Key . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 6
Table of Contents Sonar Menu 52 View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Depth Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 7
Installation Overview Before you start installation, we encourage you to read these instructions carefully in order to get the full benefit from your PiranhaMAX. There are three basic installation tasks that you must perform for the PiranhaMAX: • Installing the Control Head • Installing the Transducer • Testing the complete installation and locking the transducer position. NOTE: In addition to the hardware supplied with your transducer, you will need a powered hand drill and various drill bits,
Краткое содержание страницы № 8
Fixed Control Head Installation 1. Determine Where to Mount Begin the installation by determining where to mount the control head. Consider the following to determine the best location: • To check the location planned for the control head, test run the cables for the power and transducer. See Transom Transducer Installation in order to plan the location of the transducer and cable route. • The mounting surface should be stable enough Figure 1 to protect the control head from excessive wave shock
Краткое содержание страницы № 9
NOTE: Humminbird® is not responsible for over-voltage or over-current failures. The control head must have adequate protection through the proper selection and installation of a 1 amp fuse. 1a. If a fuse terminal is available, use crimp-on type electrical connectors (not included) that match the terminal on the fuse panel. Attach the black wire to ground (-), and the red wire to positive (+) 12 VDC power G GR ROUND OUND (Figure 3). Install a 1 amp fuse (not included) for protection of the unit.
Краткое содержание страницы № 10
3. Assemble the Control Head Base Your control head base will have a tilt and swivel mount. See the instructions below to assemble and mount the control head base. Tilt and Swivel Mount To assemble a tilt and swivel mount: Control Head Base Assembly 1. Insert the mount arms into the base. Then, hold the mount arms in place as you turn the base upside down. Mount Arms 2. Insert the swivel ring into the base, Base with the countersink holes for the arm screws facing out. 3. Secure the mount arms w
Краткое содержание страницы № 11
19 mm 3/4” 4. Route the Control Head Cables Under the Deck Use the following steps to route the control head cables under the deck. NOTE: Under the deck cable routing is not always possible. If this is not an option, the cables should be routed and secured above deck. NOTE: See Transom Transducer Installation in order to plan the location of the transducer and cable route. Tilt and Swivel Mount Tilt and Swivel Mount: Control Head Base 1a. Mark and drill a 3/4" hole as shown in Figure 6. Route th
Краткое содержание страницы № 12
5. Attach the Control Head to the Base Follow these steps to attach the control head to the already-assembled base: NOTE: The transducer cable and power cable should be routed prior to securing the mounting bracket to the deck. 1. Apply marine-grade silicone sealant to the drilled holes for the mounting bracket. 2. Place the mounting bracket on the mounting surface, aligning with the drilled holes. 3. Insert the four #8 Phillips countersink wood screws into the mounting holes. Hand tighten only!
Краткое содержание страницы № 13
5. Align the pivot knuckle with the mount base arms and slide into place, twisting slightly if necessary, until the unit is firmly seated. 6. Rotate the control head to the desired angle and hand tighten the thumbknob bolt. 7. Thread the gimbal knob onto the pivot bolt and tighten. 6. Attach the Cables to the Control Head Follow these steps to attach the power and transducer cables to the control head: 1. Matching the cable plugs to the shape and orientation of the sockets, insert the transducer
Краткое содержание страницы № 14
Transom Transducer Installation Overview Following are instructions for transom mount installation. The transom mount installation provides the least loss of signal since the transducer is mounted outside the hull. This installation also allows adjustment of both running angle and depth after the transducer is mounted, which enables you to tune the installation for best results. NOTE: Due to the wide variety of hulls, only general instructions are presented in this installation guide. Each boat
Краткое содержание страницы № 15
Transom Transducer Installation 1. Locate the Transducer Mounting Position Turbulence: You must first determine the best location on the transom to install the transducer. It is very important to locate the transducer in an area that is relatively free of turbulent water. Consider the following to find the best location with the least amount of turbulence: Areas of Possible Turbulence • As the boat moves through the water, turbulence is generated by the weight of the boat and the thrust of the p
Краткое содержание страницы № 16
transducer out of the water at higher speeds. The transducer must remain in the water for the control head to maintain the sonar signal (Figure 10). • If the transom is behind the propeller(s), it may be impossible to find an area clear from turbulence, and a different mounting technique or transducer type should be considered, such as an Inside the Hull Transducer. • If you plan to trailer your boat, do not mount the transducer too close to trailer bunks or rollers to avoid moving or damaging t
Краткое содержание страницы № 17
Level Positioning the Mounting Bracket 1. Make sure that the boat is level on the trailer, both from port to starboard and from bow to stern, by Level placing your level on the deck of the boat, first in one direction, then in the other. 2. Hold the mounting bracket against the transom of the boat in the location you have selected (Figure 13). Align the bracket horizontally, using the level. Figure 13 Make sure that the lower screw hole protrusion does not protrude past the bottom of the hull, a
Краткое содержание страницы № 18
4. Make sure that the drill bit is perpendicular to the actual surface of the transom, NOT parallel to the ground, before you drill. Using a 5/32” bit, drill the two holes only to a depth of approximately 1”. NOTE: On fiberglass hulls, it is best to use progressively larger drill bits to reduce the chance of chipping or flaking the outer coating. 3. Assemble and Mount the Transducer In this procedure, you will assemble the transducer using the hardware provided, then mount it and make adjustment
Краткое содержание страницы № 19
Measuring the Transom Angle 2. Place the two ratchets, one on either side of the transducer knuckle, so that the beads on each ratchet line up with the desired position number on the knuckle (Figure 18a). If you are setting the ratchets at position 1, the beads Plumb Line on each ratchet will line up with the rib on the transducer knuckle to form one continuous Transom line on the assembly (Figure 18b). Angle in degrees (°) NOTE: The ratchets are keyed. Make sure that the square teeth on each ra
Краткое содержание страницы № 20
3. Put the pivot bolt through the assembly to Inserting the Pivot Bolt hold it in position and loosely install the nut, but do NOT tighten the nut at this time (Figure 19). CAUTION! Do not use a high speed driver on this combination of fasteners. Hand tighten only. Figure 19 4. Align the mounting bracket transducer assembly with the drilled holes in the Mounting the Assembly transom. With a 5/16" socket driver, mount to the Transom the assembly to the transom using the two #10 - 1" long screws p
