Краткое содержание страницы № 1
ONIX 110
GPS NAVIGATOR
Quick Start Guide
Model 36-1100 Lit# 98-1324/11-08
Краткое содержание страницы № 2
Warnings and Notices GPS System & Map Data Accuracy Notice: The Global Positioning System (GPS) is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment. All map data sources contain some level of inaccuracies or incomplete data. Bushnell strives to provide the most recent map information at a reasonable cost. Warning: This device i
Краткое содержание страницы № 3
Package Contents Before you start using your ONIX 110 Handheld GPS Navigator, make sure that your package contains the following items. If anything appears to be missing or damaged, contact your local Bushnell dealer or distributor for a replacement. ONIX 110 Handheld GPS Documentation Navigator (Quick Start Guide) Software CD-Rom inc. AC Charger / USB cable * PC Companion/USB Driver/ PDF Manual * The USB cable is used both for battery charging (by connecting the AC Charger), and data tran
Краткое содержание страницы № 4
Parts Guide Front View 3 1 5 2 6 4 7 No. Item Function 1. Menu/ Press once to display the OSD menu. Backlight Press twice to display the Main Features menu. Press and hold to turn the backlight on/off. 2. Zoom Press to zoom out on a map page. Hold Out for 3 seconds to hide or display roads, rivers, etc. 3. LCD Displays the map page, satellite Screen information, OSD menus etc. 4
Краткое содержание страницы № 5
No. Item Function 4. Four-way Up arrow: Press to move the cursor up in Navigation OSD menus or on the map page. Down Keys arrow: Press to move the cursor down in OSD menus or on the map page. Left arrow: Press to move the cursor left in the OSD menus or on the map page. Right arrow: Press to move the cursor right in the OSD menus or on the map page. 5. Power/ ESC/ Press and hold to turn the power on/off. Page Press to exit (ESCape) the OSD menu. Press to toggle between the map page an
Краткое содержание страницы № 6
Charging the ONIX 110 Battery Before using your ONIX 110 for the first time, the internal rechargeable battery must be fully charged, via the USB port on the unit. Connect the supplied USB cable to the ONIX 110, then connect the other end of the cable to the AC Charger. Plug the charger into an AC wall outlet, and allow the unit to charge until the battery charge icon on the unit’s display indicates a full charge (this typically takes 4-5 hours). Once fully charged, disconnect the AC char
Краткое содержание страницы № 7
When navigation is initiated, a route between the Home location and your current location is displayed on the screen. You can refer to the route to help you go back to your Home location. Press the ESC button to return to the map page. Zooming In/Out Press the +/- buttons to zoom in/out and increase/decrease the map scale. Or, select Map Zoom Scale in the Menu, adjust it with left/right navigation keys, then press OK. The ONIX 110 features eight zoom levels. Turning on the Backlight Fig. 2
Краткое содержание страницы № 8
Setting the Home Location To set your Home Location: 1. In Simple mode, press the Menu button to display the menu options. 2. Use the navigation keys to select Set Home and press OK (Fig. 5). 3. You can set your home location in one of the following ways (Fig. 6): • Press the navigation keys to highlight Edit Home and press OK. Use the navigation keys to set the home position manually. Fig. 5 • Select Save as Home by pressing the navigation keys. Your home location is automatically set to
Краткое содержание страницы № 9
Searching for an Object (Points Of Interest) You can search for objects including roads, hotels, banks, restaurants, etc. using this feature. Read the following sections to learn how to use the search functions. 1. From the map page, press the Menu button and use the navigation keys to select the Find/Go To option and press OK (Fig. 8), then Select A Region using the navigation keys, and press OK (Fig. 9). 2. Select A Type of object using the navigation keys and press OK (Fig. 10), then Se
Краткое содержание страницы № 10
Creating Waypoints (continued) and view your new waypoint on the map, or highlight GOTO and press OK to create an auto-route from your current location to the waypoint. Modifying Waypoints To modify an existing waypoint: 1. From the map page, press the Menu button, select My Waypoints, and press OK. A list of all waypoints is displayed on the screen. 2. Highlight the waypoint you want to modify and press the Fig. 12 Menu button, select Edit from the drop down box and press OK (Fig. 12). 3.
Краткое содержание страницы № 11
input information such as name, comment, etc. 3. Highlight the waypoints field (Fig. 16). Press the Menu button and select from the following options to create a route: • Select Add WP to add existing waypoints to the route (Fig. 17). • Select Insert WP to insert a waypoint starting at the selected location on the route. 4. You can set the priority of the waypoints on the route by selecting the waypoint and pressing OK. The order of the Fig. 16 waypoints on the route is displayed in the co
Краткое содержание страницы № 12
Creating a Trail Log (continued) • Select Off to disable logging of the trail. • Select Fill to save trails with no more than 2500 trail points. • Select Wrap to create trails in a cyclical manner. After a trail log with 2500 track points is saved, new trail points are saved by overwriting the old trail points starting from 0. •Select Continue (Fig. 21) to create a single continuous trail log of all trail points. You can save up to 8 continuous Fig. 20 trail logs. 3. Press the Menu button
Краткое содержание страницы № 13
• When saving trail logs, select the Continue option and the trail log setting will automatically be set to Show ON. If you select Wrap or Fill, the trail log setting will automatically be set to Show Off. Viewing Trail Log Information To view trail log information: 1. In Advanced mode, press the Menu button, highlight Trail Logs and press OK to confirm. 2. Under the Info tab (Fig. 37) use the navigation keys to view the distance and the area traveled for the selected trail log. Fig. 24 Usi
Краткое содержание страницы № 14
Using the Measure Distance Feature The Measure Distance feature enables you to measure the distance from your current position to a specified destination. To enable the measure distance function: 1. On the map page, press the Menu button, select Measure Dist On and press OK. A ruler appears at the cursor point on the map screen (Fig. 27). Use the navigation keys to move to your destination and press OK. 2. The distance between the start point and end point is displayed. Fig. 27 Viewing Trip
Краткое содержание страницы № 15
want to change and press OK to view the available options (Fig. 32): • Speed: shows the speed at which you are traveling • Heading: shows the tracking direction • Trip Odom: shows the distance traveled so far • Trip Time: shows the time elapsed GPS • Alt : shows the altitude of your current location • Signal: shows the current signal strength of the device Avg • Speed .: shows the average speed Fig. 31 Max • Speed : shows the maximum speed •To Dest.: shows the distance to your destination 2.
Краткое содержание страницы № 16
Transferring Data You can transfer maps, waypoints, routes, trails, and fonts to and from a PC using the Connect to PC feature. System Requirements (for the PC Companion Software) Make sure that the host PC (a Mac version is not available) meets the following system requirements: • CPU: 500 megahertz (MHz), Pentium III processor or higher • Memory: 64 megabyte (MB) RAM or higher • Operating system: Windows ME, 2000, XP, or Vista • Hard disk: Min. 20 MB available • Other: CD-ROM drive, USB Port
Краткое содержание страницы № 17
2. Scroll to the Connect to PC option and press OK. 3. Press the Menu key as prompted. 4. Choose the appropriate option from those displayed on the screen as follows: • PC->GPS Map: to transfer map from a PC to the ONIX 110C. See Downloading Map on page 65. • PC->GPS My Trails: to transfer trail logs from a PC to the ONIX 110. See “Downloading Trail Logs” . • PC->GPS Wp&Rt: to transfer waypoints and routes from a PC to the ONIX 110. See “Downloading Waypoints and Routes”. • PC->GPS Geoc:
Краткое содержание страницы № 18
Features You can use the menu bar to perform various tasks from the main program window. The following sections describe how to use the GPS PC Companion menu items. You can also use the toolbar icons to carry out various functions. Move your mouse over the toolbar icons to view a tool-tip about the icon and learn what each icon represents. File Menu Click File | Open to open map card files (*.ard) or map list files (*.arl, which contains a list of several map card files). Select a map list
Краткое содержание страницы № 19
• Show/Hide | SportLog – enables or disables the display of sports logs (*.spt). • Show/Hide | Geocaching – enables or disables the display of geocaching (*.geo). Tools Menu The Tools menu enables you to view the map, move across the map, search for locations, and so on. • Arrow – Cursor becomes an arrow. Move the cursor to a road or point of interest to view information about it. • Move – Cursor becomes a hand and allows you to pan across the map. Press the left mouse button to drag and mov
Краткое содержание страницы № 20
available. Create a route as follows: i. Click New under Route to create a new route. Modify the route name if desired in the Name filed. ii. Select a waypoint from the waypoint list and click Add to add it to the route. Repeat as required. iii. Click Set Navi to create the route and display it on the map. • Geocaching – Click to create or open a geocaching file. You are prompted to specify the file in which you want to save the geocaching file. Click OPEN to use an existing file or CR
