Краткое содержание страницы № 1
Reference Manual Page 1 of 3
Personal Computer
Model No. CF-53 Series
Model No. CF-52 Series
Reference Manual
We recommend that this Reference Manual be printed.
file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C... 2011-11-29
Краткое содержание страницы № 2
Reference Manual Page 2 of 3 Descriptions For common procedures and screens for Windows 7 and Windows XP, this Reference Manual uses the procedures and screens of Windows 7. Some menus may differ for Windows XP. Windows XP does not require clicking operation to of the notification area. Disclaimer Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability for damage incurred directly or indirectly from errors, omissi
Краткое содержание страницы № 3
Reference Manual Page 3 of 3 © Panasonic Corporation 2011 file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C... 2011-11-29
Краткое содержание страницы № 4
Introduction Page 1 of 3 Introduction This manual explains using the Windows 7 or Windows XP default setting. In these instructions, the names are referred as follows. «Enter» This means to press the Enter key. ® ® "Genuine Windows 7 Professional 32-bit Service Pack 1" and "Genuine Windows 7 Professional 64-bit Service Pack 1" as "Windows" or "Windows 7" ® ® "Genuine Microsoft Windows XP Professional" as "Windows" or "Windows XP" Windows Update You can update to the latest patc
Краткое содержание страницы № 5
Introduction Page 2 of 3 When high-frequency sound occurs If high-frequency sound occurs around keyboard while using the computer, check the settings for the USB power saving function. A standard user needs to enter an administrator password and click [OK]. Set [USB selective suspend setting] to [Enabled]. 1. Click (Start) - [Control Panel] - [System and Security] - [Power Options]. 2. Click [Change plan settings] of the current power plan. 3. In [Change settings for the plan], cli
Краткое содержание страницы № 6
Introduction Page 3 of 3 Picture zoom-out/zoom-in Place two fingers slightly separated on the Touch Pad. Slide both fingers, using a straight continuous motion, closer together to zoom-out. Slide both fingers farther apart to zoom-in. file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Panasonic\Guides d'usager\C... 2011-11-29
Краткое содержание страницы № 7
Key Combinations Page 1 of 5 Key Combinations NOTE - Do not repeatedly press the keys in quick succession. - Do not use the key combinations together with touch pad (external mouse), touchscreen (only for model with touchscreen) or other key operations. - Do not use the key combinations before you log on to Windows. Wait until the drive indicator turns off. On the Setup Utility screen, you can use the key combinations of «Fn» + «F1», «Fn» + «F2» and «Fn» + «F3». By using the key combinati
Краткое содержание страницы № 8
Key Combinations Page 2 of 5 side) → HDMI display (computer side) → LCD + analog display → analog display → HDMI display (computer side) + analog display → LCD Internal LCD → Simultaneous display → External display → Internal LCD NOTE - When an external display is connected to an optional port replicator (CF-VEB522), the display switching may work differently from the above. For further information, refer to the instruction manual of the port re
Краткое содержание страницы № 9
Key Combinations Page 3 of 5 «Fn» NOTE *2 + «F6» - When fine-tuning the sound volume, press and hold «Fn», and press «F5» or «F6» intermittently. - This does not work on beeps or speakers connected to the USB port. *5 «Fn» Activate sleep + «F7» ( Entering/Resuming from Sleep or Hibernation) «Fn» Concealed Mode on/off *4 + «F8» You can select on/off of LCD Backlight, LED, Sound , Wireless Radio, Backlit Keyboard and Fan. NOTE - You have to set [Concealed Mode] to [Enabled] in Setup Ut
Краткое содержание страницы № 10
Key Combinations Page 4 of 5 *2 : These key combinations are disabled when [Concealed Mode] is enabled. *3 : Only when a port replicator having an HDMI port is connected. *4 : Even if [Sound] is set to [OFF] on the [Concealed Mode Configuration] menu, or icon on the notification area and [Volume] in [Sound-MAX] display do not show mute state. However, audio from the speaker is not heard. *5 : Windows XP: standby Hotkey Settings You can make 2 settings: Fn key lock When you pres
Краткое содержание страницы № 11
Key Combinations Page 5 of 5 The pop-up icon will not be displayed. *8 [Display status bar while Fn Key is held down] [Status bar position]: Select [TOP] or [Bottom]. 3. Click [OK]. NOTE - You can have different settings for each user. *6 : Windows XP: [start] *7 : If the speaker is muted or [Sound] is turned off in [Concealed Mode Configuration], beeps do not sound. *8 : Windows XP: [Display status bar while pressing Fn Key] file://X:\MÀJ Site Web GouvQc\Novembre 2011 Ajout de Pan
Краткое содержание страницы № 12
Touchscreen Page 1 of 5 Touchscreen You can use the touchscreen function to perform the same operation as the touch pad and mouse. Touch the screen surface with your finger or the stylus (included). For further information, click (Start) - [Control Panel] - [Hardware and Sound] - [Pen and Touch] - [Flicks] - [Practice using flicks]. To right-click 1. Touch and hold with the stylus, or touch and select the right button of "touch pointer". 1. C
Краткое содержание страницы № 13
Touchscreen Page 2 of 5 Operation of the touchscreen Operate the touchscreen with your finger or with an approved stylus When using the touchscreen function, use only your finger or an approved stylus on the surface. Operating the touchscreen with an object other than your fingertip or the stylus (a fingernail or metal object, or other hard or sharp objects that may leave a mark) may scar or stain the surface, causing the touchscreen to malfunction. Do not apply too much pressure when ope
Краткое содержание страницы № 14
Touchscreen Page 3 of 5 Next, wipe off fingerprint, etc., with the other side of the soft cloth. After wiping off foreign particles and dust, wash the soft cloth (refer to the following) to remove the foreign particles and dust from the soft cloth. When the soft cloth becomes dirty, wash it with neutral detergent. Do not use bleach or a fabric conditioner (softener), or carry out sterilization by boiling. If the LCD gets wet, wipe the surface lightly with the soft cloth. While wip
Краткое содержание страницы № 15
Touchscreen Page 4 of 5 place any objects on the LCD screen. Any of the above may cause the touchscreen glass to break, or may damage the LCD screen. Operation response may be slower in low temperature environments The touchscreen may respond to operations more slowly when using the computer in temperatures less than 5 ºC, but this is not a malfunction. Response time will return to normal when the computer is returned to room temperature. If the cursor jumps to a location other than where
Краткое содержание страницы № 16
Touchscreen Page 5 of 5 1. Run [Tablet PC Settings]. Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings]. 2. Click [Calibrate]. 3. Using the stylus, touch each of the "+" target marks one by one, and then click [OK]. Perform the calibration for the orientation to be used. 1. Run [Touch Screen Calibration Utility]. Click [start] - [All programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen Calibration Utility]. 2. Using the stylus, touch each of the "+"
Краткое содержание страницы № 17
Hand Writing Utility Page 1 of 2 Hand Writing Utility You can make a bitmap file (.bmp) of a simple character and a figure such as signature by handwriting on the touch pad and the touchscreen (only for model with touchscreen). CAUTION - Do not use the Fast User Switching function while Hand Writing Utility is active. - If you install other pointing devices (e.g., commercially available mouse driver) and overwrite the touch pad driver, Hand Writing Utility will not work. NOTE - The display
Краткое содержание страницы № 18
Hand Writing Utility Page 2 of 2 NOTE - Select the image size before handwriting by clicking [Option] - [Window size]. If you change the size after handwriting, the image quality will become lower. - You can copy the bitmap image by clicking [Edit] - [Copy], and paste it in another application software that supports bitmap format. - The touch pad mode may not work properly when using the extended desktop. - The touch pad mode may not work properly when the display is rotated 90 or 270 degre
Краткое содержание страницы № 19
Sleep and Hibernation Functions Page 1 of 7 Sleep and Hibernation Functions Starting Up Your Computer Quickly *1 The sleep or hibernation functions allow you to shut off the computer without closing programs and documents. You can quickly return to the programs and documents that you were working on *1 before sleep or hibernation. Function Data is Recovery Power supply saved to time *1 Memory Short Required. (If power is not supplied, all data will be Sleep lost.) Hibernation Hard disk R
Краткое содержание страницы № 20
Sleep and Hibernation Functions Page 2 of 7 4. Click [OK]. Standby / Hibernation 1. Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced]. 2. Select [Stand by] or [Hibernate] for [When I close the lid of my portable computer] / [When I press the power button on my computer], and then click [OK]. NOTE - You do not need to make the setting if you use the Windows menu to enter standby or hibernation. Precautions *2 Connect the AC adaptor if t
