Краткое содержание страницы № 1
Fujitsu LifeBook
S Series
BIOS Guide
LifeBook S Series Model:
S6120/6120D
Document Date: 06/06/03
Document Part Number: FPC58-0919-01
FUJITSU PC CORPORATION
1
Краткое содержание страницы № 2
LifeBook S Series Notebook BIOS S Series BIOS BIOS SETUP UTILITY POINTS ■ Selecting a field causes a help message about that The BIOS Setup Utility is a program that sets up the field to be displayed on the right-hand side of the operating environment for your notebook. Your BIOS screen. is set at the factory for normal operating conditions, ■ Pressing the Enter key with the highlight on a selec- therefore there should be no need to set or change the tion that is not a submenu or auto sele
Краткое содержание страницы № 3
Main Menu POINTS ■ If your notebook emits a series of beeps that sounds like a code and the display is blank, please refer to the Troubleshooting section of your system Use’s Guide. The Troubleshooting Section includes a list of error messages and their meanings. ■ If your data security settings require it, you may be asked for a password before the operating system will be opened. 3. If an error message is displayed on the screen, and you want to enter the setup utility, press the [F2] k
Краткое содержание страницы № 4
▲ ▲ ▲ LifeBook S Series Notebook BIOS MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field’s function and any special information needed system parameters. Follow the instructions for Navi- to help understand the field’s use. Note that the actual gating Through The Setup Utility to make any changes. drive labels shown may vary. (See Navigating Through the Setup Utility on page 2 for more information) POINT System Time and System Date
Краткое содержание страницы № 5
Main Menu Table 1: Fields, Options and Defaults for the Main Menu Menu Field Options Default Description Primary The product # of Display the type of device on this ATA/ATAPI interface, if there is Selects Primary Master: the Hard Drive one. Pressing the Enter key selects the Primary Master submenu Master submenu allowing additional device configuration options for this interface. Secondary The product # of Display the type of device on this ATA/ATAPI interface, if there is Selects Secondary
Краткое содержание страницы № 6
▲ LifeBook S Series Notebook BIOS Primary Master Submenu of the Main Menu The Primary Master submenu identifies what ATA Note that actual hard drive label shown may vary. devices are installed. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed. PhoenixBIOS Setup Utility Main Primary Master [FUJITSU MHS2030AT-(PM)] Item Specific Help Type: [Auto] Select ATA/ATAPI drive LBA Format installed here. Total Sectors: 58605120
Краткое содержание страницы № 7
Main Menu Menu Field Options Default Description ■ Heads: A number between –— This item is active only when Hard Disk is selected as type. You can 1 and 16 change the value by incrementing (pressing the [Spacebar]) or by typing in the number. ■ Sectors: A number between –— This item is active only when Hard Disk is selected as type. You can 0 and 63 change the value by incrementing (pressing the [Spacebar]) or by typing in the number. ■ Maximum Display only –— Displays the maximum capacity
Краткое содержание страницы № 8
▲ LifeBook S Series Notebook BIOS Secondary Master Submenu of the Main Menu The Secondary Master submenu is for the internal CD- not need to modify these settings; they are displayed for ROM drive. The drive type is displayed on this menu as your reference. well as the Main menu. Your notebook auto-senses the Note that actual drive labels shown may vary. characteristics of the internal drive installed. You will PhoenixBIOS Setup Utility Main Secondary Master [CD-224E-(SM)] Item Specific
Краткое содержание страницы № 9
Main Menu Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu Menu Field Options Default Description ■ Transfer Mode: Standard [Standard] Selects the method for moving data to/from the drive. Autotype the ■ drive to select the optimum transfer mode. This option cannot be Fast PIO 1 ■ changed when Auto is selected. Fast PIO 2 ■ Fast PIO 3 ■ Fast PIO 4 ■ Multiword DMA 1 ■ Multiword DMA 2 ■ Ultra DMA Disabled [Disabled] Selects the method for moving data to/fro
Краткое содержание страницы № 10
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ LifeBook S Series Notebook BIOS ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: Follow the instructions for Navigating Through the ■ Set the I/O addresses for the serial and parallel ports. Setup Utility to make any changes. ■ Set the features of the keyboard/mouse. (See Navigating Through the Setup Utility on page 2 for ■ Select between the display panel and/or an external more information) CRT display. ■ Set internal device configur
Краткое содержание страницы № 11
Advanced Menu Table 4: Fields, Options and Defaults for the Advanced Menu Menu Field Description Serial/Parallel Port When selected, opens the Serial/Parallel Port Configurations submenu which allows the user to modify set- Configurations tings for serial, infrared and parallel ports. Keyboard/Mouse When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal Features keyboard and mouse parameters. Video Features When selected, opens the Video Features su
Краткое содержание страницы № 12
▲ LifeBook S Series Notebook BIOS Serial/Parallel Port Configuration Submenu of the Advanced Menu The Serial/Parallel Port Configuration submenu provides the ability to set the I/O addresses and CAUTION interrupt levels for the serial, infrared, and parallel ports of your notebook. I/O addresses, DMA channels, and Interrupt levels can be entered in various ways, including via the BIOS setup utility, the control software for the I/O device, or the POINTS hardware. If any two ports or devi
Краткое содержание страницы № 13
Advanced Menu Table 5: Fields, Options and Defaults for Serial/Parallel Port Configuration Submenu of Advanced Menu Menu Field Options Default Description ■ Serial Port: Disabled [Enabled] Configures the serial port using either no configuration (Disabled), a user ■ defined configuration (Enabled), or by allowing the BIOS or OS to choose Enabled ■ the configuration (Auto). Auto ■ I/O Address: 3F8 - 3FF [3F8 - 3FF] Allows user to set the serial port base I/O address when serial port is ■ Enabl
Краткое содержание страницы № 14
▲ LifeBook S Series Notebook BIOS Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard. PhoenixBIOS Setup Utility Advanced Security Power Savings Exit Keyboard/Mouse Features Item Specific Help Numlock: [Auto] Selects power-on state Hot Plug: [Enabled] for Numlock. Internal Pointing Device: [Auto Disabled] Initialization on Resume: [Fast] F1 Help Select Item -/Space C
Краткое содержание страницы № 15
▲ Advanced Menu Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Video Features Item Specific Help Display: [Auto]] Select display terminal. Compensation: [Enabled] F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 7. Video Features Submenu Table 7: Fields, Options and Default
Краткое содержание страницы № 16
▲ LifeBook S Series Notebook BIOS Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Item Specific Help Internal Device Configurations [Disabled] IDE Contoller: [Both No IDE ports are Modem Controller: [Enabled] enabled. LAN Controller: [Auto] [Primary] Only primary IDE port is enabled. [Secondary] Only secondary I
Краткое содержание страницы № 17
▲ Advanced Menu CPU Features Submenu of the Advanced Menu The CPU Features Submenu allows the user to modify the Intel(R) SpeedStep(R) Technology features. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Item Specific Help CPU Features Select Enhanced SpeedStep(R) Technology: [Enabled] Intel(R) SpeedStep(R) On Battery: [Battery Optimized] Technology enabled or On AC: [Maximum Performance] disabled. F1 Help Select Item -/Space Change Values F9 S
Краткое содержание страницы № 18
▲ LifeBook S Series Notebook BIOS USB Features Submenu of the Advanced Menu The USB Features Submenu configures the USB features for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit USB Features Item Specific Help [Enabled] Legacy USB Support: [Disabled] SCSI SubClass Support: [Disabled] The feature is disabled. [Enabled] Legacy Floppy Emulation is enabled and USB floppy is available without USB aware OS. F1 Help Select Item -/Space Change Va
Краткое содержание страницы № 19
▲ Advanced Menu Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations Submenu configures miscellaneous features for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Miscellaneous Configurations Item Specific Help Power Button: [Disabled] Configures the power Wake up on LAN: [Disabled] button. Volume Setting: [Middle] *ACPI OS ignores this setting. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit
Краткое содержание страницы № 20
▲ LifeBook S Series Notebook BIOS Event Logging Submenu of the Advanced Menu The Event Logging Submenu configures event logging features for DMI events. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Event Logging Item Specific Help Event Log Capacity: Space Available Press key to Event Log Validity: Valid view the contents of the event log. View Event Log: [Enter] Event Logging: [Enabled] System Boot Event: [Disabled] Clear All Event
