Краткое содержание страницы № 1
Dell™ Inspiron™ 1300/B120/B130 Service Manual
Before You Begin
Hinge
System Components
Battery
Memory, Optical Drive, and Mini PCI Card
Hard Drive
Keyboard
Display Assembly
Palm Rest
Modem
Coin-Cell Battery
Microprocessor Thermal-Cooling Assembly
Microprocessor Module
Speakers
System Board
Antenna
Fan
Flashing the BIOS
Base Plastics
Pinout Assignments for I/O Connectors
Model PP21L
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you m
Краткое содержание страницы № 2
Back to Contents Page Antenna Dell™ Inspiron™ 1300/B120/B130 Service Manual Replacing the Antenna Replacing the Antenna CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide. CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface. 1.
Краткое содержание страницы № 3
1 antenna cable 2 guides Back to Contents Page
Краткое содержание страницы № 4
Back to Contents Page Base Plastics Dell™ Inspiron™ 1300/B120/B130 Service Manual CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide. CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface. 1. Follow the instructions in Before Working Ins
Краткое содержание страницы № 5
Back to Contents Page Battery Dell™ Inspiron™ 1300/B120/B130 Service Manual Replacing the Battery Replacing the Battery CAUTION: Before performing these procedures, disconnect the modem from the telephone wall jack. CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The battery is designed to work with your Dell™ computer. Do not use a battery from other computers wit
Краткое содержание страницы № 6
Back to Contents Page Before You Begin Dell™ Inspiron™ 1300/B120/B130 Service Manual Recommended Tools Turning Off Your Computer Before Working Inside Your Computer Computer Orientation Screw Identification This chapter provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that the following conditions exist: l You have performed the steps in Turning Off Your Computer and Before Working Ins
Краткое содержание страницы № 7
NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack. 3. Disconnect any telephone, network, and USB cables from the computer. 4. Disconnect your computer and all attached devices from their electrical outlets. 5. Turn over the computer. NOTICE: To avoid damaging the system board, you must remove the main battery before you service the computer. 6. Remove the battery. a. Slide the battery
Краткое содержание страницы № 8
Optical Drive: Fan Module: Display Assembly to Computer Base: (1 each) (4 each) (4 each) Modem to Display Bezel: Display Panel: System Board: (6 each) (8 each) (2 each) Top of Palm Rest to Base Plastic to Hard Drive Carrier to Computer Base: Palm Rest From Bottom: Hard Drive: (5 each of M2.5 x 5 mm) (10 each) (2 each) (2 each of M2 x 3 mm) Speakers to System Board to Keyboard to Palm Rest: Base Plastics: Base Plastics: (2 each) (1 for l
Краткое содержание страницы № 9
Back to Contents Page Flashing the BIOS Dell™ Inspiron™ 1300/B120/B130 Service Manual Flashing the BIOS From a CD Flashing the BIOS From the Hard Drive If a BIOS-update program CD is provided with the new system board, flash the BIOS from the CD. If you do not have a BIOS-update program CD, flash the BIOS from the hard drive. Flashing the BIOS From a CD 1. Ensure that the AC adapter is plugged in and that the main battery is installed properly. NOTE: If you use a
Краткое содержание страницы № 10
Back to Contents Page Coin-Cell Battery Dell™ Inspiron™ 1300/B120/B130 Service Manual Removing the Coin-Cell Battery Replacing the Coin-Cell Battery Removing the Coin-Cell Battery CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide. CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic componen
Краткое содержание страницы № 11
Back to Contents Page
Краткое содержание страницы № 12
Back to Contents Page Microprocessor Module Dell™ Inspiron™ 1300/B120/B130 Service Manual Removing the Microprocessor Module Installing the Microprocessor Module Removing the Microprocessor Module CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide. CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's el
Краткое содержание страницы № 13
1. Align the pin-1 corner of the microprocessor module so that it points to the triangle on the system board, and insert the microprocessor module into the ZIF socket. When the microprocessor module is correctly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than the others, the module is not seated correctly. NOTICE: Hold the microprocessor down while turning the cam screw to prevent intermittent contact between the cam screw
Краткое содержание страницы № 14
Back to Contents Page Display Assembly Dell™ Inspiron™ 1300/B120/B130 Service Manual Removing the Display Assembly Removing the Display Bezel Removing the Display Panel Installing the Display Panel Removing the Display Assembly CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide. CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body befo
Краткое содержание страницы № 15
1 antenna cable 2 display cable 1 antenna cable 2 display cable pull tab NOTICE: Be careful not to damage the display switch when removing the display. 12. Lift the display assembly out of the computer base. Removing the Display Bezel CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide. CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your bod
Краткое содержание страницы № 16
1 screw covers/display bumpers (6) 2 M2.5 x 5-mm screws (6) 3 display bezel 4 top cover Removing the Display Panel CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide. CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface. 1. Follow
Краткое содержание страницы № 17
1 display panel 2 top cover 3 M2 x 3-mm screws (8) 6. Press in both sides of the top flex-cable connector, and pull the top flex-cable connector away from the display connector. 1 inverter connector 2 pull-tab on bottom flex-cable connector 3 top flex-cable connector 4 display connector 7. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector. Installing the Display Panel 1. Connect the top flex-cable connector to the disp
Краткое содержание страницы № 18
Краткое содержание страницы № 19
Back to Contents Page Fan Dell™ Inspiron™ 1300/B120/B130 Service Manual Removing the Cooling Fan Installing the Cooling Fan Removing the Cooling Fan CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide. CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching a
Краткое содержание страницы № 20
1 fan assembly 2 metal plate 3 M2.5 x 5-mm screws (4) 17. Remove the plate and lift the system board off the fan assembly. Installing the Cooling Fan 1. Position the system board over the fan assembly, aligning the screw holes in the system board with those in the fan assembly. 2. Place the metal plate over the holes in the system board and replace the four M2.5 x 5-mm screws. 3. Turn the system board over and connect the fan connector to the system board. Ba
