Руководство по эксплуатации DeWalt 7941

Краткое содержание страницы № 1

Cisco IP Phone 7941/7942/7961/7962 Users
Guide

Name Description
1 Cisco phone model Shows the Cisco Unified IP phone model number.
2 LCD screen Displays information such as call status, phone number, and soft key tabs.
3 Line / speed-dial button Opens a new line, speed-dials a phone number, or ends a call.

4 Foot stand adjustment Allows you to adjust the angle of the phone base.
5 Directories button Provides access to phone directories.

6 Question button Get

Краткое содержание страницы № 2

17 Handset with indicator The light blinks when the phone rings and remains lit to announce the light arrival of a new voice-mail message. Operating Your Cisco 7961 IP Phone Basic: Place a Call To place a call, use one of the following methods: • Lift the handset and dial the number. • Dial the number and then lift the handset. • Press a line button, dial the number, and then lift the handset. • Press the New Call soft key, dial the number, and then lift the handset. • Press a

Краткое содержание страницы № 3

To redial the most recently dialed number, use one of the following methods: • Lift the handset and press the Redial soft key. • Press the Redial soft key to dial using the speakerphone. Page 3 of 6 5/5/2009

Краткое содержание страницы № 4

Place a Call on Hold To place a call on hold while on the call, press the Hold soft key. To retrieve a held call: Press the Resume soft key. If multiple calls are on hold, use the Navigation button to select the desired call then press Resume. If multiple lines are on hold, press the line button for the line that you want to pick up. An active call is automatically put on hold when you retrieve a previously held call. Note Because the hold feature can generate music or beeps

Краткое содержание страницы № 5

Transfer a Call Transfer a selected call to another number in one of two ways: • Blind transfer—Immediately redirects the call without allowing you to speak to the transfer recipient. • Consult transfer—Redirects the call after first allowing you to announce the call to the transfer recipient. To transfer a call, perform the following steps: 1. During a call, press the Trnsfer soft key. The call is placed on hold. 2. Dial the number to which you want to transfer the call. 3. T

Краткое содержание страницы № 6

Retrieve Voice Mail Messages Press the Messages button, and follow the voice instructions. Join Existing Calls Together To join calls together, perform the following steps: 1. Place calls on hold. 2. Use the Navigation button to highlight one of the callers. 3. Press the more > Select soft key and a check mark will appear on the highlighted call. 4. Repeat steps 2 and 3 for all lines you want to join together, up to a total of 3 lines. 5. Press the more > Join soft key and all of