Краткое содержание страницы № 1
®
Broadband PowerShield
Models: CP16 and CP27
User Manual
990-2366A 04/2006
Краткое содержание страницы № 2
Краткое содержание страницы № 3
Chapter 1: General Information ® The PowerShield provides a power source for broadband telephony, Fiber-to-the-Home/Premise (FTTH/P), and other direct current (DC) equipment/applications. Safety This manual contains important instructions that should be followed during installation and maintenance of the APC equipment and batteries. It is intended for APC customers that set up, install, relocate, or maintain APC equipment. Changes and modifications to this unit not expressly appro
Краткое содержание страницы № 4
Specifications General Model Number Input Output Maximum Maximum Battery Signal Signal Type Voltage Current CP16U48 100-240 V 50/60 Hz 1.0 A 48 V 30 V 5 mA 12 V 7.2 AHr 16 W Spill-Proof, Maintenance- 13 V CP27U13 100-240 V 50/60 Hz 1.0 A 30 V 5 mA Free, 27 W Sealed Lead Acid Environmental Operating Temperature -4º F to 122º F (-20º C to 50º C) Operating Humidity 5 to 95% noncondensing within enclosure Maximum Operating Elevation 10,000 ft (3,000 m) Maximum Storage Elevat
Краткое содержание страницы № 5
Chapter 2: Installation Enclosure Installation Install the enclosure in a protected area that is free of excessive dust and has adequate airflow. Do not operate the PowerShield where the temperature and humidity are outside the specified limits. See Indoor Use Only Specifications. ! " # Battery Cover Release Tabs $ Use screws that are appropriate for the weight of this unit and the mounting surface material. See Specifications. 3
Краткое содержание страницы № 6
Battery Installation ! " # Red Black Cable Cable Positive Negative Terminal Terminal Battery Cover Release Tabs $ % 4
Краткое содержание страницы № 7
Connect Equipment and Power The PowerShield battery charges when it is connected to utility power. The battery charges fully during the first eight hours of normal operation. Do not expect full battery run capability during this initial charge period. Utility Power Cord Inlet Output Power and Optional Runtime Communication Extension Connector Signals 1. Connect the PowerShield to the application equipment (example: FTTH/P Optical
Краткое содержание страницы № 8
Chapter 3: Operation Status Indicators and Features Front Panel Status Indicators Indicator Description Utility Solid green indicates the unit is on utility power. Solid yellow indicates that utility power is not present and the unit is on battery power. Flashing green LED indicates the unit is fast-charging. Green indicates the unit is working properly and DC output power is provided Output by the battery or the utility power. Replace Battery/ Red indicates that the ba
Краткое содержание страницы № 9
Alarm Silence Button The audible alarms may be silenced by utilizing the dual function Replace Battery/Alarm Silence LED/button / . Function Button Operation Description (Press and hold for:) Replace Battery- <4 seconds If the alarm has been silenced, the unit will emit one quick beep. If the alarm has been Temporarily enabled, two quick beeps will be emitted. Enable/Disable Replace Battery- 8-12 seconds If the alarm has been silenced, the unit will emit one quick beep. If the
Краткое содержание страницы № 10
Chapter 4: Maintenance, Service, Approvals, and Warranty Battery Replacement This unit has an easy to replace, hot-swappable battery. Replacement is a safe procedure, isolated from electrical hazards. You may leave the unit and connected equipment on for this procedure. During the self-test, battery removal and replacement are not recommended. For self-test disabling, see Alarm Silence Button. Replace the spent battery with APC replacement battery RBC2. See your dealer or refer to t
Краткое содержание страницы № 11
4. Return the unit by insured, prepaid carrier to the address given to you by Customer Support. Always DISCONNECT THE BATTERY before shipping in compliance with U.S. Department of Transportation (DOT) regulations. Contact Information Refer to the APC Web site, www.apc.com. Regulatory Approvals 9
Краткое содержание страницы № 12
Limited Warranty American Power Conversion (APC) warrants its products to be free from defects in materials and workmanship for a period of two years from the date of purchase. Its obligation under this warranty is limited to repairing or replacing, at its own sole option, any such defective products. To obtain service under warranty you must obtain a Returned Material Authorization (RMA) number from customer support. Products must be returned with transportation charges prepaid and mus
