Краткое содержание страницы № 1
Crestron CLS-C6 Series
™
iLux Integrated Lighting Systems
User Guide
.
Краткое содержание страницы № 2
Contents ™ iLux Integrated Lighting Systems: CLS-C6 Series 1 Introduction................................................................................................................................1 Operating Modes........................................................................................................................5 Standard Mode.............................................................................................................5 Lights Mode....................
Краткое содержание страницы № 3
™ Crestron CLS-C6 Series iLux Integrated Lighting Systems ™ iLux Integrated Lighting Systems: CLS-C6 Series Introduction ™ The CLS-C6 series of iLux units are complete, integrated wall-mounted lighting ® systems that can function as standalone devices and/or be part of a Crestron solution total control system network. The units are intended for installation in boardrooms, auditoriums, home theaters, or anywhere versatile and cost-effective control of lighting and shades is required. Th
Краткое содержание страницы № 4
™ iLux Integrated Lighting Systems Crestron CLS-C6 Series CLS-C6 Model Definition Model Power RequirementsMotion Control System Integration ® ® Designation 120 VAC 230 VAC Detector 2 Cresnet 1 Cresnet ; 1 infiNET™ CLS-C6 X X CLS-C6M X X X CLSI-C6 X X CLSI-C6M X X X CLS-C6RF X X CLS-C6MRF X X X CLSI-C6RF X X CLSI-C6MRF X X X All controls and indicators for the CLS-C6 are located on the front of the unit. The front panel also con
Краткое содержание страницы № 5
™ Crestron CLS-C6 Series iLux Integrated Lighting Systems CLS -C6 Controls & Indicators The table on the following page describes the function of the iLux unit’s controls and indicators, which are listed in alphabetical order. NOTE: Standard mode, Lights mode, and Shades mode mentioned in the following discussions are described in “Operating Modes” on page 5. CLS-C6 Controls & Indicators Descriptions CONTROLS & INDICATORS DESCRIPTION In Standard mode and Lights mode, the bargraph LEDs
Краткое содержание страницы № 6
™ iLux Integrated Lighting Systems Crestron CLS-C6 Series CLS-C6 Controls & Indicators Descriptions (Continued) CONTROLS & INDICATORS DESCRIPTION The ON button always recalls the On scene. ON Button (Refer to “Standard Mode” on page 5.) Use these pushbuttons when changing scene ^, v, Save, and Cancel Pushbuttons and presets. The Save and Cancel LEDs indicate LEDs when these functions are active. (Refer to “Changing Scene Presets” on page 7.) Use this switch to select the Shades mode.
Краткое содержание страницы № 7
™ Crestron CLS-C6 Series iLux Integrated Lighting Systems Operating Modes After installation, the CLS-C6 operates in one of three modes: • Standard mode: this is the default mode; buttons are typically used to recall scenes, although they can be reprogrammed by the dealer for other functions. • Lights mode: this mode is used to manually adjust lighting loads. • Shades mode: this mode is used to manually control shade groups. The following descriptions do not include additional functional
Краткое содержание страницы № 8
™ iLux Integrated Lighting Systems Crestron CLS-C6 Series To exit Lights mode, press the Lights button again, or press Cancel. The LED will go off, and the unit will revert to Standard mode. Shades Mode Shades mode allows you to manually adjust any of the six shade groups. To enter Shades mode, press the Shades button. The LED will light, and the six function buttons can now be used to adjust shade groups 1 through 6. • Press the right side of the function buttons to open the shades; pres
Краткое содержание страницы № 9
™ Crestron CLS-C6 Series iLux Integrated Lighting Systems Changing Scene Presets The CLS-C6 scene settings can be modified using the front panel controls, without having to use a PC. Changes to the lighting load levels and shade presets for one or more scenes can be accomplished as follows: 1. In Standard mode, press the function button of the scene you wish to modify and hold it for five seconds. (Make sure you press the center of the button so both sides make contact.) 2. The two-digi
Краткое содержание страницы № 10
™ iLux Integrated Lighting Systems Crestron CLS-C6 Series 12. To adjust the fade time, press the ^ and v buttons. When going up, the value will go from 0 seconds to 59 seconds, and then 1 minute to 99 minutes. When going down, the value will go from 99 minutes to 1 minute, and then 59 seconds to 0 seconds. The Min and Sec LEDs light as appropriate. Adjustment to fade time can be made when either Lights mode or Shades mode is active. 13. When all the lighting loads are at the desired level
Краткое содержание страницы № 11
™ Crestron CLS-C6 Series iLux Integrated Lighting Systems Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact your dealer. CLS-C6 Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION The unit does not Incorrect procedures were Refer to “Changing Scene respond as used to change the Presets” on page 7 to revise the expected after preset. preset correctly. changing preset. F
Краткое содержание страницы № 12
Crestron Electronics, Inc. User Guide - DOC. 6395B 15 Volvo Drive Rockleigh, NJ 07647 (2014521) Tel: 888.CRESTRON 06.08 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
