Руководство по эксплуатации Walker Edison 52" Corner TV Stand W52CCRBL

Краткое содержание страницы № 1

Item #: W52CCR
Assembly Instructions
Revised 07/2012

Краткое содержание страницы № 2

General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main types of hardware used to assemble this product are wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate h

Краткое содержание страницы № 3

Parts List

Краткое содержание страницы № 4

Hardware List

Краткое содержание страницы № 5

Insert dowels (A) into panels (2,5). Insert dowels (A) into panels (3,4) and slats (14). Screw cam bolts (B) into panels (3,4) and slats (14).

Краткое содержание страницы № 6

Screw cam bolts (B) into top panel (1). Screw cam bolts (B) into bottom panel (9).

Краткое содержание страницы № 7

Attach slat (14) to panel (3) using cam bolts and dowels as guides. Secure the two pieces together using cam locks (C). Tighten cam locks (C) with a screwdriver. Attach slat (14) to panel (4) using cam bolts and dowels as guides. Secure the two pieces together using cam locks (C). Tighten cam locks (C) with a screwdriver.

Краткое содержание страницы № 8

Attach panels (3,4) to panel (5) using cam bolts and dowels as guides. Secure panel (3) to panel (5) using cam locks (C). Tighten cam locks (C) with a screwdriver.

Краткое содержание страницы № 9

Secure panel (4) to panel (5) using cam locks (C). Tighten cam locks (C) with a screwdriver. Attach the panel assembly from the previous step to bottom panel (9) using cam bolts and dowels as guides.

Краткое содержание страницы № 10

Secure panel (3) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver. Secure panel (4) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver.

Краткое содержание страницы № 11

Carefully slide panels (2) into place using cam bolts and dowels as guides. Secure panels (2) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver.

Краткое содержание страницы № 12

On opposite side of console, secure panels (2) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver. Carefully slide back panels (10,11) into place along back side of console. Panels (10,11) will overlap slightly as shown in insert above.

Краткое содержание страницы № 13

Secure back panels (10,11) to the console using screws (J). Carefully fit top panel (1) into place using cam bolts and dowels as guides.

Краткое содержание страницы № 14

Secure top panel (1) to panels (2,3) using cam locks (C). Tighten cam locks (C) with a screwdriver. Secure top panel (1) to panels (2,4) using cam locks (C). Tighten cam locks (C) with a screwdriver.

Краткое содержание страницы № 15

1 2 2 On back side of console, secure top panel (1) to panels (2) using cam locks (C). Tighten cam locks (C) with a screwdriver. Cover all visible cam locks with stickers (K) as desired.

Краткое содержание страницы № 16

Attach hinges (G) to doors (12,13) using screws (H). Attach doors (12,13) to the console using screws (H) at hinges (G). See page 2 for specific instructions on how to adjust hinges so doors are aligned with console as desired. Attach handles (D) to doors (12,13) using bolts (E).

Краткое содержание страницы № 17

Insert shelf support pins (F) into console at desired shelf heights. Insert shelf support pins (F) into console at desired shelf heights.

Краткое содержание страницы № 18

Carefully place shelves (6,7,8) into console. Shelves (6,7,8) will rest on the shelf support pins.