Руководство по эксплуатации Hans Grohe Axor 17010XX1

Краткое содержание страницы № 1

Installation Instructions / Warranty
Axor Carlton
17010XX1

Краткое содержание страницы № 2

Axor Carlton Single Control Lavatory Faucet 17010XX1 Technical Specification Hole size in mounting surface Minimum 1-3/8” Maximum 1-5/8” Maximum mounting surface depth 1-1/4” Flow rate . GPM  Maximum operating pressure 145 PSI Recommended operating pressure  - 7.5 PSI  o o Recommended hot water temp 10 - 140 F* TM M3 cartridge with Boltic handle screw o *Some governing bodies require that the water heater be set to 10  F or less. Please know and follow all local codes when sett

Краткое содержание страницы № 3

Install the faucet stud Place the faucet and sealing ring on top of the mounting surface. Install the mounting flange over the stud. Thread sealing ring the collar onto the stud until the mounting flange is firmly against the bottom of the mounting surface. mounting flange collar Secure the supply lines to the stop valves with the 3/8” compression fittings (not included). Use two wrenches to insure that supply hoses do not twist. For proper operation of the faucet, hot should be on th

Краткое содержание страницы № 4

Install the pop-up drain Remove the plunger assembly. Unscrew the drain outlet flange from the tee. plunger Unscrew the tailpiece from the tee. Wrap height adjuster the threads with two layers of Teflon tape and replace. flange Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. From under the sink, install the black mack gasket, white friction ring and retainer nut sealing gasket to the flange. Do not tighten the nut against the bottom of the sink

Краткое содержание страницы № 5

Re-set the High Temperature Limit Stop (optional) Close the drain OR cover it with a wash cloth. Use a 4 mm Allen wrench to push the screw cover into the handle. Retrieve the screw cover when the handle is removed. Use the 4mm Allen wrench to loosen the handle screw 4 complete revolutions. Remove the handle and put it in a safe place. Remove the decorative nut cover and put it in a safe place. Remove the handle screw from the stem of the cartridge. Remove the high temperature limit st

Краткое содержание страницы № 6

User Instructions • Push the handle up to turn the water on. • Pivot the handle to the left for hotter water, to the right for cooler water. • Push the handle down to turn the water off. Troubleshooting Replacement Parts 

Краткое содержание страницы № 7

Cleaning Recommendation for Hansgrohe Products Modern sanitary faucetry and shower fixtures consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain points when cleaning: Cleaning materials for faucets and shower products: Acids are necessary ingredients of cleaning materials for removing lime. However, please pay attention to the following points when cleaning faucets a

Краткое содержание страницы № 8

limitation, a commercial purpose, this warranty extends only (i) for 1 year, with respect to Interaktiv and Retroaktiv products, and (ii) for 5 years, with respect to AXOR, ShowerPower and Pharo products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) improper installation, improper maintenance, misuse, abuse, negligence, accident