Руководство по эксплуатации JBL HT18

Краткое содержание страницы № 1

®
HOME THEATER
IN-WALL SERIES
HTI6, HTI8, HTI55 and
HTI6C
OWNER’S GUIDE
English

Краткое содержание страницы № 2

English THANK YOU FOR CHOOSING JBL For more than 50 years, JBL We’re confident that the Please take a moment to has been involved in every JBL loudspeakers you have register your product on our aspect of music and film chosen will provide every note Web site at www.jbl.com. It recording and reproduction, of enjoyment that you expected enables us to keep you posted from live performances to – and that when you think on our latest advancements, monitoring the recordings you about purchasing additi

Краткое содержание страницы № 3

SPEAKER PLACEMENT FRONT SPEAKERS (HTI6, HTI8, HTI55) 0 0 40 – 60 MODELS HTI6, HTI8 AND HTI55 AS REAR SPEAKERS 5 – 6 ft. WALL WALL WALL WALL MODEL HTI6C IN CEILING be placed at about the same and, ideally, should face each height from the floor as the other and be at a level higher listeners’ ears will be, with the than the listeners’ ears. If that tweeters aimed toward the is not possible, they may be listening position at ear-level placed in a wall behind the lis- height. tening position, facin

Краткое содержание страницы № 4

English SPEAKER CONNECTIONS CONNECTION TIPS The wires for both speakers Speakers and electronics should be the same length. If terminals have corresponding one speaker is placed closer to (+) and (–) terminals. Most the amplifier than the other, manufacturers of speakers and hide the excess wire behind the electronics, including JBL, use wall. red to denote the (+) terminal and black for the (–) terminal. It is important to connect both speakers identically: (+) on the speaker to (+) on the amp

Краткое содержание страницы № 5

EXISTING CONSTRUCTION HTI6, HTI8, HTI55 Level ≥1/2" ≥1/2" ≥1/2" Template Remove the grille from the Determine the correct speaker Note: Always allow at least speaker frame by pulling on the location. one-half inch between a wall paper tab. If the tab is missing, stud and the speaker cutout or Note: Remove the inner tem- to avoid scratching the grille or the locking tabs will not be able plate, which is the paint shield, baffle you may unfold a paper to swivel into place. at the perforation. Use

Краткое содержание страницы № 6

English EXISTING CONSTRUCTION HTI6C ≥1/2" ≥1/2" ≥1/2" Remove the grille from the Determine the correct speaker Cut the drywall. speaker frame by pulling on the location. Note: Always allow at least paper tab. If the tab is missing, Note: Remove the inner tem- one-half inch between a wall to avoid scratching the grille or plate, which is the paint shield, stud and the speaker cutout or baffle you may unfold a paper at the perforation. Use the the locking tabs will not be able clip, insert the st

Краткое содержание страницы № 7

NEW CONSTRUCTION You will need to purchase the correct rough-in frame kit for your model: Speaker Model Rough-in Frame Kit HTI6 RIF6 HTI8 RIF8 HTI55 RIF55 HTI6C RIF6C Detailed installation instructions are supplied with the rough-in kit. PAINTING THE SPEAKER FRAME AND GRILLE JBL HTI Series loudspeakers This will protect the speaker Note: Gently remove the can be painted to match any components and baffle from acoustical foam blanket from decor. If you wish to change paint residue. the grille be

Краткое содержание страницы № 8

English SPECIFICATIONS HTI6 HTI8 HTI55 HTI6C Frequency Response Frequency Response Frequency Response Frequency Response 38Hz – 20kHz (–10dB) 30Hz – 20kHz (–10dB) 40Hz – 20kHz (–10dB) 40Hz – 20kHz (–10dB) Recommended Maximum Recommended Maximum Recommended Maximum Recommended Maximum † † † † Amplifier Power Amplifier Power Amplifier Power Amplifier Power 100 watts 120 watts 120 watts 100 watts Impedance Impedance Impedance Impedance 8 ohms nominal 8 ohms nominal 8 ohms nominal 8 ohms nomina