Краткое содержание страницы № 1
4x4 Component
w/Audio Matrix
EXT-COMPAUD-44424
User Manual
www.gefen.com f
Краткое содержание страницы № 2
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 4x4 Component w/Audio Matrix is a trademark of Gefen Inc. © 200
Краткое содержание страницы № 3
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Connecting And Operating The 4x4 Component w/Audio Matrix 6 RMT-16-IR Remote Installation 7 RS-232 Serial Control Interface 8 Rack Mount Installation 9 Specifi cations 10 Warranty
Краткое содержание страницы № 4
INTRODUCTION Congratulations on your purchase of the 4x4 Component w/Audio Matrix. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products supplement cross-platform computer systems, professional audio/video environments and HDTV systems of all sizes with hard-working solutions that are easy
Краткое содержание страницы № 5
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 4X4 COMPONENT W/AUDIO MATRIX • The 4x4 Component Audio Matrix is housed in a metal box for better RF shielding. • The 4x4 Component Audio Matrix works with all component displays. 2
Краткое содержание страницы № 6
FEATURES Features • Switches easily between any four component/audio sources • Sends up to four video inputs to any four remote displays • Maintains 1080p, and 2k resolution video • Discrete IR remote (included) • Serial RS-232 remote port (for unattended control) • Rack ears included • Specifi cations: Package Includes (1) 4x4 Component w/Audio Matrix (4) 6-foot 5 RCA Component Audio/Video cables (1) 24V DC Power Supply (1) Rack Ears (1) User’s Manual 3
Краткое содержание страницы № 7
PANEL LAYOUT 4 Front Panel IR Sensor Power Indicator Display 1 Display 2 Display 3 Display 4 and Reset button LED Source Indicator LED Source Indicator LED source Indicator LED Source Indicator and selector button and selector button and selector button and selector button Back Panel Component and Analog/Digital Component and Analog/Digital Component and Analog/Digital Component and Analog/Digital Audio Output 3 Audio Output 1 Audio input 3 Audio Input 1 Component and Analog/Digital Component an
Краткое содержание страницы № 8
CONNECTING AND OPERATING THE 4X4 COMPONENT W/AUDIO MATRIX How to Connect the 4x4 Component w/Audio Matrix 1. Connect up to 4 component video/audio sources to the 4x4 Component w/ Audio Matrix inputs using the supplied 5 RCA analog stereo audio cable Optionally, connect digital coaxial audio to the 4x4 Component w/Audio Matrix using a user supplied digital coaxial cable. 2. Connect up to 4 component video displays to the 4x4 Component w/Audio Matrix outputs using user supplied component cables
Краткое содержание страницы № 9
RMT-16-IR REMOTE INSTALLATION 1. Remove battery cover from the back of the RMT-16-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. 4. Test the RMT-16-IR remote by pressing ONLY one button at a time. The indicator light on the remote will fl ash once each time you press a button. WARNING: Do not press multiple buttons simultaneous
Краткое содержание страницы № 10
RS-232 SERIAL CONTROL INTERFACE 12345 12345 6789 6789 Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface Binary Table ASCII Corresponding Binary ASCII Corresponding Binary RMT16-IR RMT16-IR Button Button 1 1 0011 0001 9 9 0011 1001 2 2 0011 0010 a 10 0110 0001 3 3 0011 0011 b 11 0110 0010 4 4 0011 0100 c 12 0110 0011 5 5 0011 0101 d 13 0110 0100 6 6 0011 0110 e 14 0110 0101 7 7 0011 0111 f 15 0110 0110 8 8 0011 1000 g 16 0110 0111 RS232 Settings Bits per second ....
Краткое содержание страницы № 11
RACK MOUNT INSTALLATION Rack mount ears are provided for installation of this unit into a 1U rack mount space. 1. Locate the side screws on the unit. 2. Remove the front 2 screws that are located closest to the front of the unit. 3. Using the removed screws, screw the rack mounting bracket into the unit. 4. Repeat the procedure on the opposite side of the unit. 1 Front of unit Rear of unit 2 3 4 8
Краткое содержание страницы № 12
SPECIFICATIONS Video Amplifi er Bandwidth ....................................................................... 350 MHz Input Video Signal .............................................................................. 1.2 Volts p-p Video Resolution .......................................................................................... 1080p Video Connector ...................................................................... RCA-style RGB x 3 Analog Audio Connector .........................
