Руководство по эксплуатации SkyLink AA-433

Краткое содержание страницы № 1

www.skylinkhome.com
Audio Alarm
MODEL : AA-433
CUSTOMER SERVICE
17 Sheard Avenue,
Brampton, Ontario, Canada L6Y 1J3
Tel : (800) 304-1187
Fax : (800) 286-1320
P/N. 101Z693-001 FEB,2012 Email : support@skylinkhome.com US Patent no. 6243000B1

Краткое содержание страницы № 2

SKYLINK TECHNOLOGIES INC. ADDITIONAL ACCESSORIES Your Guide to the Audio Sensor (AS-433) - Detects alarm sound from existing security Audio Alarm system alarm; sends signal to Dial-Alert. - Eliminates need for monitoring service. - 9V alkaline battery included. MODEL: AA-433 Temperature Sensor (TS-101A) - Monitors temperature of a specific area (i.e., greenhouse, horse farms, laboratory etc.) - Activates Security Control Panel (SC-001) or (AM-001 / ML-001) or Emergency Dialer (AD-433S o

Краткое содержание страницы № 3

ADDITIONAL ACCESSORIES TABLE OF CONTENTS Security Control Panel (SC-001) OVERVIEW......................................................................................... 4 - Four alarm modes (Day, Night, Away, Chime) - Four zones, each zone controls up to 6 PACKAGE CONTENTS.......................................................................................4 decives - Reliable design with microcontroller INSTALLATION...........................................................................

Краткое содержание страницы № 4

OVERVIEW ADDITIONAL ACCESSORIES The Audio Alarm (AA-433) is designed to be used in conjunction with Skylink Additional sensors and transmitters as well as add on accessories are available Security System (SC-10, SC-100 series, SC-1000 series) and any Skylink to work with your security system. sensors/transmitters. When any of the Skylink Security Systems or sensors/ transmitters are activated, the siren of the audio alarm will sound at 110dB. You Motion Sensor (PS-434A) can also set the audio al

Краткое содержание страницы № 5

BATTERY MAINTENANCE INSTALLATION Installation is done using the screws included. For your convenience, we have Audio Alarm Battery also included wall anchors and a template to aid in the installation of the Audio Alarm. The Audio Alarm comes equipped with a 9 volt alkaline back up battery in case the electrical power is interrupted for any reason. How to use the template to help in the installation: When the Audio Alarm battery is low, the “LO BATT” light goes on. 1. Tape the template to the wa

Краткое содержание страницы № 6

INSTALLATION DELETE SENSORS AND TRANSMITTERS You cannot delete one sensor/transmitter from the Audio Alarm at a time. You Screwing the unit to the wall must clear all the sensors and transmitters that are currently communicating with the Audio Alarm, then re-program the ones you want to keep. 1. Unscrew the two triangular hanging tabs located at the back of the Audio Alarm. Delete All Sensors and Transmitters 2. Turn them around and slide them back into place so that the two tabs are pointing up

Краткое содержание страницы № 7

KEYPAD TRANSMITTER OPERATION OF THE AUDIO ALARM When the Keypad Transmitter (KP-434) is The Audio Alarm is designed to work with Skylink Security System (SC10, SC-100 used in conjuction with the Audio Alarm, it series, SC-1000 series) and all the Skylink sensors / transmitters. If you are functions the same as the Keychain Trans- using the Audio Alarm (AA-433) to communicate with a Skylink sensor (i.e. door/ mitter (4B-433A or 4B-434). You are able to window sensor) and not a Skylink Security Sy

Краткое содержание страницы № 8

LIGHTS AND SOUNDS ACTIVATE AND DEACTIVATE THE SYSTEM Now that the system is installed and the sensors are communicating with the Audio Alarm, it is time to learn how to arm and disarm the Audio Alarm. LIGHTS The only way to arm and disarm the Audio Alarm is via the Keychain Transmitter and Keypad Control (option). ON light lit -power is being sent to the Audio Alarm. KEYCHAIN TRANSMITTER (4B-433A) OR (4B-434) ALL BELOW SCENARIOS INCLUDE THE “ON” LIGHT LIT LO BATT light off - the Audio Alarm is b