Краткое содержание страницы № 1
D9412GV3/D7412GV3
Operation and Installation Guide
EN Control Panels
Краткое содержание страницы № 2
D9412GV3/D7412GV3 | Operation and Installation Guide | Trademarks . Trademarks Federal Communications CoBox is a registered trademark of Lantronix. Commission (FCC) Rules Windows is a registered trademark of Microsoft Part 15 Corporation in the United States or in other countries. This equipment was tested and found to comply with Molex is a registered trademark of Molex the limits for a Class A digital device, pursuant to Part Incorporated. 15 of the FCC rules. These limits are desi
Краткое содержание страницы № 3
D9412GV3/D7412GV3 | Operation and Installation Guide | Federal Communications Commission (FCC) Rules . The telephone company might make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company provides advance notice in order for the necessary modifications to be made in order to maintain uninterrupted service. This equipment cannot be used on public coin service provided by the telephone com
Краткое содержание страницы № 4
D9412GV3/D7412GV3 | Operation and Installation Guide | Contents . 4.7 Programming the Control Panel....................17 4.8 Installing the Point Chart Label .....................18 Contents 4.9 Testing the System .........................................18 1.0 Introduction ......................................................7 4.10 Service Walk Test ...........................................18 2.0 Lightning Strikes .............................................8 5.0 Power Supply....
Краткое содержание страницы № 5
D9412GV3/D7412GV3 | Operation and Installation Guide | Contents . 8.5 Wiring Information for Installations Using the 11.3 D279A Independent Zone Control................57 Rothenbuhler 5110/4001-42 High Security 11.4 Keyswitch .........................................................57 Bell.....................................................................33 11.4.1 Description .......................................................57 9.0 Off-Board Points................................
Краткое содержание страницы № 6
D9412GV3/D7412GV3 | Operation and Installation Guide | Tables . Figure 36: D9412GV3, Input Points and Peripheral Figures Devices System Wiring ...........................67 Figure 1: System Configuration ................................9 Figure 37: D9412GV3, SDI Devices System Wiring Figure 2: Enclosure Mounting .................................15 System Wiring...........................................68 Figure 3: Enabling Ground Fault Detection...........16 Figure 38: D7412GV3, Power
Краткое содержание страницы № 7
D9412GV3/D7412GV3 | Operation and Installation Guide | 1.0 Introduction . 1.0 Introduction This manual addresses the operation and installation of the D9412GV3 and D7412GV3 Control Panels. Throughout this guide, the words “control panel” refer to both control panels (D9412GV3 and D7412GV3). Table 2 on page 9 provides an overview of the differences in the control panels. To obtain any of the documents in Table 1, contact Bosch Security Systems, Inc. Customer Service at (800) 289-0096 and
Краткое содержание страницы № 8
D9412GV3/D7412GV3 | Operation and Installation Guide | 2.0 Lightning Strikes . 2.0 Lightning Strikes The control panels are designed to significantly reduce electromagnetic interference and malfunction generally caused by lightning. 2.1 Effects Any electronic system can be struck directly by lightning or be adversely affected by a lightning strike near the system. When lightning strikes, several things happen: An electromagnetic wave spreads from the point of the strike induci
Краткое содержание страницы № 9
D9412GV3/D7412GV3 | Operation and Installation Guide | 3.0 Overview . 3.0 Overview 3.1 Configuration and Parts Figure 1: System Configuration - , " /
& . , , * ' * & ) # $%"& 81/ /$%6 81/ / 2 ! $% " "" 9 7 : !+'9:;7:) ! 45$67 47
Краткое содержание страницы № 10
D9412GV3/D7412GV3 | Operation and Installation Guide | 3.0 Overview . D1255B, D1255, D1256, D1260, D1260B 3.1.1 Parts List Keypad, or D720 Keypad The D9412GV3 andD7412GV3 Control Panels are D1255RB Fire Keypad, D1256RB Fire Keypad, or shipped assembled from the factory with the following D1257RB Fire Alarm Annunciator parts: D1640 Transformer Literature Pack D126 or D1218 Battery D9412GV3/D7412GV3 Program Record Sheet D161 or D162 Phone Cord (order two cords if (P/N:
Краткое содержание страницы № 11
D9412GV3/D7412GV3 | Operation and Installation Guide | 3.0 Overview . 3.2 Accessories Refer to the Bosch Security Systems, Inc. product catalog for additional information. 1 Table 3: Compatible Accessories Model Title UL 864 Fire Intrusion D122/D122L Dual Battery Harness X X X D125B Powered Loop Interface Module X X X D127 Reversing Relay X X X D129 Dual Class A Initiation Circuit Module X X X D130 Relay Module X X X D185 Reverse Polarity Module X X D192G Bell Circuit Supervisio
Краткое содержание страницы № 12
D9412GV3/D7412GV3 | Operation and Installation Guide | 3.0 Overview . 3.3 Features in the D9412GV3 and Any points programmed as fire D7412GV3 supervisory points are latching. 3.3.1 SDI Molex Connector Use the SDI Molex Connector to easily connect an 3.3.5 Areas and Accounts SDI device to the SDI bus without needing to disconnect wires connected to the SDI terminals. The D9412GV3 supports up to 32 areas. The Possible applications include: D7412GV3 supports up to 8 areas. You can
Краткое содержание страницы № 13
D9412GV3/D7412GV3 | Operation and Installation Guide | 3.0 Overview . 3.3.7 Keypads 3.3.9 Access Control Up to 32 unsupervised keypads can be connected to The D9412GV3 can control eight access doors (each the system. The available power, number of requiring the optional D9210B Wiegand Control supervised keypads, and number of areas covered Interface Module) with up to 996 uniquely identified affect the total number of keypads that can be cards or tokens. The D7412GV3 can control two conne
Краткое содержание страницы № 14
D9412GV3/D7412GV3 | Operation and Installation Guide | 4.0 Installation . 3.3.13 Ground Fault Detection Added Feature Skeds (scheduled events) Limited local programming available in the When Ground Fault Detect is enabled (S4 closed), Service Menu Points 1 to 8 can be used for non-powered fire- initiating devices such as heat detectors, four-wire smoke detectors, and pull stations. A D125B Powered 4.0 Installation Loop Interface or a D129 Dual Class A Interface 4.1 Installation Pr
Краткое содержание страницы № 15
D9412GV3/D7412GV3 | Operation and Installation Guide | 4.0 Installation . Figure 2: Enclosure Mounting 3 2 4 1 2 7 8 3 5 9 6 1 - Point chart label 6- Enclosure mounting holes (5) 2 - Mounting skirt hooks (2) 7 - Mounting skirt hook holes (2) 3 - Module mounting holes (12) 8 - Back of D9412GV3/D7412GV3 Control Panel 4 - Tamper switch mounting holes (5) 9 - Lock down tab 5 - Skirt mounting hole (1) 4.4 Installing the Control Panel 4.5 Connecting Earth Ground 1. Place the control panel
Краткое содержание страницы № 16
D9412GV3/D7412GV3 | Operation and Installation Guide | 4.0 Installation . If a ground fault condition occurs, the keypads display Table 5: Ground Fault Impedance SERVC GND FAULT and the control panel transmits Specifications a GROUND FAULT TROUBLE, AREA 1. When the control panel recognizes that the ground Impedance Control Panel Detects Ground Fault fault condition is corrected, and remains corrected for between 5 to 45 consecutive sec, a Restoral Report is ≤ 300 Ω Yes sent. 300
Краткое содержание страницы № 17
D9412GV3/D7412GV3 | Operation and Installation Guide | 4.0 Installation . Instructions for the D8125 POPEX Module, 4.6 Completing the Installation D8128D OctoPOPIT Module, D8129 OctoRelay If not already complete, make the earth ground Module, D811 Arm Status Relay Module, and connection to Terminal 10 and lock the reset pin in D928 Dual Phone Line Switcher appear in this the closed position. guide. 4.6.1 Charging the Battery Refer to Section 9.0 Off-Board Points on page Connect the
Краткое содержание страницы № 18
D9412GV3/D7412GV3 | Operation and Installation Guide | 4.0 Installation . 4.8 Installing the Point Chart Label Only Walk Test Start and Walk Test End are reported to the central station. The point chart label is required for fire systems with verifications points. The D9131A can be configured for local A point chart label is included in the literature pack. printing. Refer to the D9412GV3/ D7412GV3 Program Entry Guide Install the point chart label for fire or combined fire- and
Краткое содержание страницы № 19
D9412GV3/D7412GV3 | Operation and Installation Guide | 4.0 Installation . 6. After the last point is tested, 0 PTS TO TEST 5. To see the points that remain untested during the appears. Press [ESC]. The display shows ALL Service Walk Test: PTS TESTED briefly before returning to idle text. a. Press [ESC] when point text appears. The display shows ## PTS TO TEST. The Service Walk Test, when performed on a D7412GV3, cannot display “0 PTS b. Press the [ESC] key. VIEW UNTESTED ? TO TEST”
Краткое содержание страницы № 20
D9412GV3/D7412GV3 | Operation and Installation Guide | 4.0 Installation . Figure 5: D9412GV3 Service Walk Test Flow Chart SERVICE WALK? [ENT] 246 PTS TO TEST [ESC] Test a device POINT TEXT (Text displays for 60 seconds) 245 PTS TO TEST [ESC] Test a device POINT TEXT (Text displays for 60 seconds) 244 PTS TO TEST [ESC] Test a device POINT TEXT 1 PTS TO TEST [ESC] Test a device 0 PTS TO TEST IDLE TEXT [ESC] VIEW UNTESTED? [ENT] # PTS UNTESTED [ESC] [NEXT] [ESC] POINT TEXT Bosch Security S
