Руководство по эксплуатации Swann CONNECT CAM 500

Краткое содержание страницы № 1

IP ConnectCam™ 500






Quick Installation Guide
www.swannsecurity.com

Краткое содержание страницы № 2

Getting Started 1 Package Contents Check the items contained in the package carefully. You should have the following items. Once any item contained is damaged or missing, contact the authorized dealer of your locale. One Network Camera One AC Power Adapter One External Antenna (for wireless model) One Camera Stand One Ethernet Cable (RJ-45 type) One Installation CD-ROM One Quick Installation Guide System Requirement Networking LAN: 10Base-T Ethernet or 100Base-TX Fast

Краткое содержание страницы № 3

Setting Up the Camera 2 Installing the Camera Stand The camera comes with a camera stand, which uses a swivel ball screw head to lock to the camera’s screw hole. When the camera stand is attached, you can place the camera anywhere by mounting the camera through the three screw holes located in the base of the camera stand. The Camera Stand -2-

Краткое содержание страницы № 4

Connecting the Camera to LAN Use the provided Ethernet cable to connect the camera to your local area network (LAN). When you connect the AC power adapter, the camera is powered on automatically. You can verify the power status from the Power LED on the front panel of the camera. Once connected, the Link LED starts flashing green light and the camera is on standby and ready for use now. Connecting the Ethernet Cable -3-

Краткое содержание страницы № 5

Connecting the Camera to WLAN If you use a wireless network in your application environment, you need to attach the included external antenna to the camera. When the camera is powered on, the camera will automatically search any access point with “default” SSID. Connecting the External Antenna NOTE If the camera cannot to your wireless network, you need to install the camera in LAN and proceed with WLAN settings. -4-

Краткое содержание страницы № 6

Accessing the Camera 3 Using IPFinder 1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program. 2. Click the IPFinder item to launch the utility. The control panel will appear as below. Display the connected camera(s). Double click to link the Camera. Click About to get the Version information of IPFinder. Click Link to connect the selected camera. Click Search to find the IP address of the connected camera(s). Click Change IP

Краткое содержание страницы № 7

click Install Software then select IPFinder on the Auto-Run screen. Accessing to the Camera 1. Open the Web browser on your computer (for example, Microsoft Internet Explorer in this guide) 2. Type the default IP address (192.168.0.30) or the IP address found by IPFinder in the Address bar, and then press [Enter]. 3. When the login window appears, enter the default User name (admin) and password (admin) and press OK to access to the main screen of the camera’s Web Configuration. En

Краткое содержание страницы № 8

4. Click Setup and then Smart Wizard to set up your camera quickly. The Smart Wizard will guide you through the necessary settings with detailed instructions on each step. -7-

Краткое содержание страницы № 9

Tips 4 For more information, please refer to the Advanced Installation Guide on the provided Installation CD-ROM. For details of operating UltraView, please refer to the Software User Guide on the provided Installation CD-ROM. If you have any problem on the product(s), please contact your local authorized dealer. FCC WARNING STATEMENT This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfe