Краткое содержание страницы № 1
®
DD5L Series
Dome Drive
Installation/
Operation Manual
C1471M (10/98)
Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150
International Customers: Tel (1-209) 292-1981 or FAX (1-209) 348-1120
Краткое содержание страницы № 2
CONTENTS Section Page 1.0 GENERAL ..................................................................................................3 1.1 IMPORTANT SAFEGUARDS AND WARNINGS ...............................3 1.2 UNPACKING INSTRUCTIONS ..........................................................4 2.0 DESCRIPTION ..........................................................................................5 2.1 MODELS .........................................................................................
Краткое содержание страницы № 3
1.0 GENERAL 1.1 IMPORTANT SAFEGUARDS AND WARNINGS Observe the following WARNINGS before installing and using this product. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture. 3. Only use replacement parts Pelco recommends. 4. After replacing
Краткое содержание страницы № 4
1.2 UNPACKING INSTRUCTIONS This box contains one dome drive and one Installation/Operation manual (C1471M). Inspect all parts carefully. Save the shipping carton, boxes, and inserts. If an item appears damaged, replace it in its box and contact the factory at 1-800-289-9100 or 1-209-292-1981 for replacement. (International customers fax 1-209-348-1120 for authorization and instructions.) To return an item to the factory for repair, refer to Section 8.0, WARRANTY AND RETURN, for instructions. BA
Краткое содержание страницы № 5
2.0 DESCRIPTION ® Spectra Lite domes can do the following: • 360° pan rotation • preset positioning • +2 to -92° tilt • variable speed ® All Spectra Lite models include a color CCD camera with a 12X zoom lens and capability to focus when going to a preset position. An integral receiver has a switch ® to select the type of control. The receiver supports Coaxitron and RS-422 control types. The dome operates on 24 VAC. The dome drive is quickly installed and removed from the back box without tools
Краткое содержание страницы № 6
3.0 INSTALLATION ® NOTE: For Coaxitron control, 1. Turn on power to the back box. The red LED should light to indicate power. If the LED does not light, correct the trouble before proceeding. (Refer to Sec- SW2 is not used and all switches tion 6.0, TROUBLESHOOTING, in manual C1487M.) If the light operates, must be OFF. you may either leave power on or turn it off before continuing the installation. 2. Set the switches on the bottom of the dome drive. Refer to Table A for the settings for SW1,
Краткое содержание страницы № 7
Table B. Switch Settings for SW2 – P-Type Control ® NOTE: For Coaxitron controls, all switches on SW2 MUST be OFF. For D-type control systems, refer to Table C. Receiver Address Switch Setting SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 1 OFF OFF OFF OFF OFF 2ON OFF OFF OFF OFF 3 OFF ON OFF OFF OFF 4ONON OFF OFF OFF 5 OFF OFF ON OFF OFF 6ON OFF ON OFF OFF 7 OFF ON ON OFF OFF 8ONONON OFF OFF 9 OFF OFF OFF ON OFF 10 ON OFF OFF ON OFF 11 OFF ON OFF ON OFF 12 ON ON OFF ON OFF 13 OFF OFF ON ON OFF 14 ON OFF ON ON
Краткое содержание страницы № 8
Table C. Switch Settings for SW2 – D-Type Control ® NOTE: For Coaxitron controls, all switches on SW2 MUST be OFF. For P-type control systems, refer to Table B. Receiver Address Switch Setting SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 1ON OFF OFF OFF OFF OFF OFF OFF 2 OFF ON OFF OFF OFF OFF OFF OFF 3ONON OFF OFF OFF OFF OFF OFF 4 OFF OFF ON OFF OFF OFF OFF OFF 5ON OFF ON OFF OFF OFF OFF OFF 6 OFF ON ON OFF OFF OFF OFF OFF 7ONONONOFF OFF OFF OFF OFF 8 OFF OFF OFF ON OFF OFF OFF OFF 9ON OFF
Краткое содержание страницы № 9
Table C. Switch Settings for SW2 – D-Type Control (Continued) ® NOTE: For Coaxitron controls, all switches on SW2 MUST be OFF. For P-type control systems, refer to Table B. Receiver Address Switch Setting SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 57 ON OFF OFF ON ON ON OFF OFF 58 OFF ON OFF ON ON ON OFF OFF 59 ON ON OFF ON ON ON OFF OFF 60 OFF OFF ON ON ON ON OFF OFF 61 ON OFF ON ON ON ON OFF OFF 62 OFF ON ON ON ON ON OFF OFF 63 ON ON ON ON ON ON OFF OFF 64 OFF OFF OFF OFF OFF OFF ON OFF
Краткое содержание страницы № 10
Table C. Switch Settings for SW2 – D-Type Control (Continued) ® NOTE: For Coaxitron controls, all switches on SW2 MUST be OFF. For P-type control systems, refer to Table B. Receiver Address Switch Setting SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 113 ON OFF OFF OFF ON ON ON OFF 114 OFF ON OFF OFF ON ON ON OFF 115 ON ON OFF OFF ON ON ON OFF 116 OFF OFF ON OFF ON ON ON OFF 117 ON OFF ON OFF ON ON ON OFF 118 OFF ON ON OFF ON ON ON OFF 119 ON ONONOFF ON ON ON OFF 120 OFF OFF OFF ON ON ON ON O
Краткое содержание страницы № 11
Table C. Switch Settings for SW2 – D-Type Control (Continued) ® NOTE: For Coaxitron controls, all switches on SW2 MUST be OFF. For P-type control systems, refer to Table B. Receiver Address Switch Setting SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 169 ON OFF OFF ON OFF ON OFF ON 170 OFF ON OFF ON OFF ON OFF ON 171 ON ON OFF ON OFF ON OFF ON 172 OFF OFF ON ON OFF ON OFF ON 173 ON OFF ON ON OFF ON OFF ON 174 OFF ON ON ON OFF ON OFF ON 175 ON ON ON ON OFF ON OFF ON 176 OFF OFF OFF OFF ON ON O
Краткое содержание страницы № 12
Table C. Switch Settings for SW2 – D-Type Control (Continued) ® NOTE: For Coaxitron controls, all switches on SW2 MUST be OFF. For P-type control systems, refer to Table B. Receiver Address Switch Setting SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 225 ON OFF OFF OFF OFF ON ON ON 226 OFF ON OFF OFF OFF ON ON ON 227 ON ON OFF OFF OFF ON ON ON 228 OFF OFF ON OFF OFF ON ON ON 229 ON OFF ON OFF OFF ON ON ON 230 OFF ON ON OFF OFF ON ON ON 231 ON ON ON OFF OFF ON ON ON 232 OFF OFF OFF ON OFF ON O
Краткое содержание страницы № 13
4.0 OPERATION The red LED in the back box interconnect door lights when power is turned on and the fan exhausts heat from inside the back box. If you have an outdoor pendant model with a heater, heater elements in the back box turn on at 70°F (21°C) and off at 85°F (29°C). The heater element in the lower dome turns on at 40°F (4°C) and off at 60°F (16°C). The interconnect door fan and heater fans in the outdoor back box operate continuously. 4.1 POWER-UP DISPLAY When the dome is powered up or
Краткое содержание страницы № 14
4.3 ZOOM ® The Spectra Lite dome can magnify an object up to 12 times (12X of optical zoom). Zoom Telephoto - Press and hold down the Zoom Tele button until you have the picture you want. Zoom Wide - Press the Zoom Wide button to increase the field of view. 4.4 PRESET FUNCTIONS ® NOTE: For AMERICAN DYNAM- The Spectra Lite dome can go to 32 preset locations, each with a 20-character label. Presets are numbered 1-32. Refer to your control system documentation for ICS controllers with only 32 pre
Краткое содержание страницы № 15
4.6 PARK If the dome does not receive any commands for a specified period, it goes to preset 1 and parks. The dome will not park if the time specified is zero or preset 1 has not been programmed. The default is zero minutes. ® 4.7 PROGRAMMING THE SPECTRA LITE The dome can be programmed for the following functions: AGC (automatic gain control) Gain Sharpness Auto flip disable Limit stops Shutter speed Auto park time Power line synchronization White balance Backlight compensation Power-up mode C
Краткое содержание страницы № 16
CM9500 ® 1. Enter the number of the Spectra Lite camera and press the CAM key. 2. Press the SELECT key twice. 3. Highlight CAM in the Setup menu and press the SELECT key. 4. Highlight PRESET in the Camera menu and press the SELECT key. 5. Enter 95 and press the F1 key. The main menu appears. CM9750 1. Turn the KEY SWITCH to the ON position. 2. Press the PROG key. PROGRAM appears on the LCD screen. 3. Press the PRES key. The PRESET prompt appears. 4. Enter 95 and press the ENTER key. The main men
Краткое содержание страницы № 17
The following settings are not reset when the camera is reset: park time, auto flip disable, and limit stops. Turning off power to the dome does not reset the camera. Camera settings are retained in memory, and when power is restored, the settings are the same as when the camera was turned off. To reset the camera: 1. On the main menu, move the joystick up or down to position the cursor (>) beside Camera. 2. Press the Iris Open button to enter the Camera submenu. 3. Move the joystick up or down
Краткое содержание страницы № 18
4.7.5 Shutter Speed There are nine electronic shutter speeds: Auto 1/100 1/120 1/500 1/1,000 1/2,000 1/4,000 1/10,000 1/30,000 In the Auto setting the camera controls the shutter speed automatically. Increasing the shutter speed lowers the light sensitivity, but rapidly moving objects will be less blurred as the speed is increased. To change the electronic shutter speed settings: 1. On the main menu, move the joystick up or down to position the cursor (>) beside Camera. 2. Press the Iris Open b
Краткое содержание страницы № 19
R-B WHITE BALANCE - Move the joystick up or down to a value. As you change the value, you can see the color change on your monitor. Press the Iris Open button to select the value, or press the Iris Close button if you do not want to change the setting. If Auto White Balance is on, it changes to off when you select a new value. M-G WHITE BALANCE - Move the joystick up or down to a value. As you change the value, you can see the color change on your monitor. Press the Iris Open button to select th
Краткое содержание страницы № 20
3. Move the joystick up or down to cycle through the selections. Stop on the item you want to select. 4. SELECT – Press the Iris Open button to select your choice. CANCEL – Press the Iris Close button if you do not want to change the setting. 4.7.10 Auto Flip The two auto flip modes are on (auto flip enabled) or off (feature disabled). To change the auto flip mode: 1. On the main menu, move the joystick up or down to position the cursor (>) beside Other. 2. Press the Iris Open button to enter t
