Краткое содержание страницы № 1
LTC 2210 Series
Instruction Manual
EN Motion Detector
Краткое содержание страницы № 2
| LTC 2210 Series | Instruction Manual | Important Safeguards EN 2 Important Safeguards 10. Power Sources - Operate the unit only from the type 1. Read, Follow, and Retain Instructions - All safety of power source indicated on the label. If unsure of and operating instructions should be read and the type of power supply to use, contact your dealer followed before operating the unit. Retain instructions or local power company. for future reference. •For units intended to operate from battery pow
Краткое содержание страницы № 3
| LTC 2210 Series | Instruction Manual | FCC Information EN 3 WARNING: For Indoor Product Electrostatic-sensitive device. Use 1. Water and Moisture - Do not use this unit near proper CMOS/MOSFET handling water - for example, in a wet basement, in an precautions to avoid electrostatic ATTENTION OBSERVE PRECAUTIONS discharge. unprotected outdoor installation or in any area FOR HANDLING ELECTROSTATIC SENSITIVE classified as a wet location. DEVICES 2. Object and Liquid Entry - Never push objects
Краткое содержание страницы № 4
| LTC 2210 Series | Instruction Manual | Safety Precautions EN 4 Safety Precautions Sécurité ATTENTION : POUR ÉVITER TOUT RISQUE D'ÉLECTROCUTION, CAUTION: TO REDUCE THE RISK OF N'ESSAYEZ PAS DE RETIRER LE CAPOT (OU LE PANNEAU ELECTRIC SHOCK, DO NOT REMOVE COVER ARRIÈRE). CET APPAREIL NE CONTIENT AUCUN COMPOSANT (OR BACK). NO USER SERVICEABLE PARTS SUSCEPTIBLE D'ÊTRE RÉPARÉ PAR L'UTILISATEUR. CONFIEZ INSIDE. REFER SERVICING TO QUALIFIED LA RÉPARATION DE L'APPAREIL À DU PERSONNEL QUALIFIÉ. SERVIC
Краткое содержание страницы № 5
| LTC 2210 Series | Instruction Manual | Contents EN 5 Table of Contents Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 1.0 UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 6
| LTC 2210 Series | Instruction Manual | Unpacking EN 6 1.0 UNPACKING 3.0 DESCRIPTION This equipment should be unpacked and handled with The LTC 2210 Series video motion detectors utilize care. If an item appears to have been damaged in edge detection with digital tracing technology. Patented shipment, notify the shipper. circuitry provides reliable security surveillance protection. These economical, full featured single Verify that all parts shown in the Parts List have been channel detectors p
Краткое содержание страницы № 7
| LTC 2210 Series | Instruction Manual | Operatio EN 7 The first line of each menu gives the menu name. The 4.5 Alarm/Accessory Connector main menu is the first menu displayed. In addition to A cable with a connector is supplied connecting to alarm closures or other accessories. the menu name the first line of this menu also displays the version number of the software in this product. All The alarm output creates a short between the two programmable items are given in the lines immediately outpu
Краткое содержание страницы № 8
| LTC 2210 Series | Instruction Manual | Operation EN 8 A single line of help is displayed by default at the 5.3 Zone Setup bottom of the screen. Zones can also be created over This menu is used to define the areas where motion this area. If this hinders defining the zone area, the can be detected. A total of 8 different zones can be help information can be removed from the screen by defined. Unrestricted areas where motion is permitted pressing the arrow â, ß keys simultaneously. Pressing and o
Краткое содержание страницы № 9
| LTC 2210 Series | Instruction Manual | Operation EN 9 This menu defines parameters specific to the operation 5.7 Detection Sensitivity on the motion detector. This option is programmed from the Zone Setup menu. It defines the difference in luminance between Item Settings Description an object and its background which is required to Beeper ON/OFF If ON, the beeper will produce an alarm. The following chart may be used as sound when motion is a guide to arrive at the correct setting: detected. A
Краткое содержание страницы № 10
| LTC 2210 Series | Instruction Manual | Operation EN 10 1. The LTC 2210 can detect motion over the full active 5.11 Display video signal, however all of this cannot be displayed The display menu is used to configure how the motion on the video monitor as most video monitors cannot detector looks on the monitor screen. display the entire active video signal. This parameter Display allows the video area where detection zones are defined to be restricted so that the full detection area >PREVIOUS M
Краткое содержание страницы № 11
| LTC 2210 Series | Instruction Manual | Illustrations EN 11 6.0 ILLUSTRATIONS Figure 1 Front and Back Panels Pin Function Pin Function 1Ground 9 Alarm Relay (NO) 2NC 10 NC 1 611 3NC 11 NC 2 12 7 4NC 12 NC 5NC 13 NC 3 13 8 6 Alarm 1 14 Alarm Relay (NO) 4 14 9 7NC15Remote Alarm Enable Input 5 10 15 8NC NOTE: NC designates No Connection, NO designates Normally Open. Figure 2 ALARM/ACCESSORY Connector Bosch Security Systems | December 17, 2004
Краткое содержание страницы № 12
| LTC 2210 Series | Instruction Manual | Illustrations EN 12 Camera #3 Video Door Actuation Switch Camera #2 Smoke Detector Camera #4 Camera #1 Motion Detector 1 611 ALARM/ ACCESSORY 2 7 12 3 8 13 4 9 14 5 10 15 Additional Came ras 75W 75W 75 Hi-Z W ALARM/ MON ACCESSORY A CAM CAM C AM 1 2 3 45 6 7 8 MON B Switcher To Terminated Alarm Ou tput Auxiliary Monitor or Terminated Switcher Relay Closu re 75W 75 W Figure 3 Typical Installation Bosch Security Systems, Inc. Bosch Security Syst
