Краткое содержание страницы № 1
®
Voyager Legend UC
Wireless Headset System (B235 and
B235-M)
User guide
Краткое содержание страницы № 2
Contents Welcome 3 Featured highlights 3 ™ System requirements for Plantronics Spokes Software 3 What's in the box 4 Overview 5 Headset 5 Bluetooth USB adapter 5 The basics 6 Call controls 6 Mute 7 Adjust the volume 7 Use Smart Sensors 7 Play or pause streaming audio 7 Pair phone or tablet 8 Features 9 Listen to audio via A2DP 9 Transmission range 9 Simultaneous call handling behaviour (PC mobile) 9 Voice alerts 9 Voice alerts list 9 Voice commands 10 Voice commands list 10 Disable the answer/i
Краткое содержание страницы № 3
Welcome Congratulations on purchasing your new Plantronics Voyager Legend UC wireless headset system. This user guide contains instructions for setting up and using your Voyager Legend Bluetooth Headset and BT300 Bluetooth USB Adapter. Featured highlights • Auto Answer calls by placing headset on your ear. • Auto transfers calls between mobile phone and headset • When on a mobile or PC call, softphone presence is automatically updated • Eliminates accidental dialling by locking call button when
Краткое содержание страницы № 4
What's in the box Foam ear tip covers and Voyager Legend Bluetooth headset Bluetooth USB adapter silicone ear tips Micro USB charging cable with headset Portable charging case charging adapter Desktop charging stand AC charger 4
Краткое содержание страницы № 5
Overview Headset voice Call button Volume button Indicator light (LED) Power button Snap-fit magnetic charge connection Mute button Voice button Play/Pause button Bluetooth USB adapter Indicator light (LED) 5
Краткое содержание страницы № 6
The basics voice Call controls Answer a call Choose: • Tap the Call button • Put headset on (Smart Sensor) • Say "answer" when prompted (mobile phone only) Answer a second call Choose: • Tap the Call button to end current call, then tap the Call button again to answer the second call. • Or, for mobile calls, tap the Call button once to end current call, then say "answer" when prompted to answer the second call. End a call Tap the Call button to end current call. Reject a call Choose: • Pres
Краткое содержание страницы № 7
Caller announcement (mobile phone only) When wearing your headset, you will hear the name of a contact calling you so you can decide whether to answer or ignore the call without having to check the phone screen. An incoming caller name is announced: • if your phone supports Phone Book Access Profile (PBAP) • if you granted access to your contacts during the pairing process (for many mobile phone's this is preset out-of-the box and may not be necessary) • if the caller is stored in the phone's co
Краткое содержание страницы № 8
Pair phone or tablet Pair your headset to your phone or another device, such as a tablet. 1 Switch on your headset then choose: • Tap the Voice button and say “Pair mode,” or • Press and hold the Call button until you hear “Pairing” ® 2 While the headset LEDs are flashing red and blue, activate Bluetooth on your phone and set it to search for new devices. 3 Select “PLT_Legend.” PLT_Legend 4 If your phone asks for a passcode, enter four zeros (0000) for the passcode or accept the connection
Краткое содержание страницы № 9
Features Listen to audio via A2DP Your Voyager Legend headset can play media files (music, podcasts, navigation, etc.) from any A2DP (Advanced Audio Distribution Profile for Bluetooth)-enabled mobile device. Transmission range Your Voyager Legend Bluetooth headset has a 10 metre effective range. Voice prompts from your headset will alert you if you lose connection with your mobile phone or PC Bluetooth Adapter. Simultaneous call You can be on a call using a computer softphone application and rec
Краткое содержание страницы № 10
Tap the Voice button , wait for command request, then say a command. For example, “What Voice commands can I say?” tells you the full list of available commands. You can change the voice command ™ language by visiting plantronics.com/myheadset and downloading the MyHeadset Updater tool. The available languages are English with a US accent, English with a UK accent, French, German and Spanish. Voice commands list • "Am I connected?" • "Answer" • "Call vocalyst" • "Cancel" • "Check battery" • "Ign
Краткое содержание страницы № 11
Fit Replace the ear tip for a better fit. Change the ear tip 1 Push in ear tip and rotate to the left to unlock it. 2 2 1 2 Align new ear tip into slot. 3 Push and rotate it to the right to lock it into place. 2 2 1 Wear on the left or right To wear the headset on your other ear, rotate the boom upwards then twist it around so the ear tip is on the other side before lowering the boom. 1 3 2 11
Краткое содержание страницы № 12
Charge There are three ways to charge your headset. Your new headset has enough power to pair and make a few calls before charging is needed, though you may charge it at any time. NOTE Always charge at near room temperature; never charge battery at temperatures below 0°C (32°F) or above 40°C (104°F). 1 Align snap-fit magnetic areas of headset and charging device. 2 Attach charging device to USB wall charger or laptop. LEDs turn off once fully charged. A full charge will take 90 minutes. You may
Краткое содержание страницы № 13
Understand the charge case lights The indicator lights flash battery status for the charging case and the headset . • 3 red flashes = battery critical • 2 red flashes = battery low • 2 blue flashes = battery medium • 3 blue flashes = battery full The case indicator lights flash when: • the headset is docked/undocked • the case is connected/disconnected • the battery status button is pressed Test battery status Press the battery status button to see the battery status of the charging case or th
Краткое содержание страницы № 14
Low battery warnings Battery Level Tone Voice Prompt 30 minutes of talk time Double high tone every 15 "Battery Low" repeats every 30 remaining (this alert only occurs minutes minutes during an active call) 10 minutes of talk time Triple high tone every 30 "Recharge Headset" every 3 remaining seconds minutes 14
Краткое содержание страницы № 15
Pairing your Bluetooth USB adapter Initial pairing Your Bluetooth USB adapter comes pre-paired to your Voyager Legend headset. Re-Pair Bluetooth USB In the event that your headset and Bluetooth USB adapter are not paired or become unpaired Adapter to headset do the following: 1 Remove the Bluetooth USB adapter. 2 Power on your headset then choose: • Tap the Voice button and say "Pair Mode." • Press and hold the Call button until you hear "Pairing." 3 Insert Bluetooth USB adapter directly into
Краткое содержание страницы № 16
Connect PC and call 1 Power headset on. 2 Insert Bluetooth USB adapter directly into your PC USB port. The LED will flash and then turn solid blue to indicate the headset is connected to the USB adapter. The LED remains solid blue when not on an active call. NOTE Insert your Bluetooth USB Adapter directly to your laptop or PC instead of connecting to a USB port on the docking station or hub. 3 Load Plantronics Spokes software by visiting plantronics.com/software and click on the "Download" butto
Краткое содержание страницы № 17
Customise your headset Your headset understands and speaks in English. You can change the language and other settings online. ™ MyHeadset Updater (plantronics.com/myheadset) tool enables you to: • Receive firmware updates • Change language for voice alerts and commands (English with a UK accent, English with a US accent, French, German and Spanish). Voice alerts are also available in Cantonese and Mandarin.) • Change regional phone number for Vocalyst service • Turn voice commands on/off ™ • Tur
Краткое содержание страницы № 18
NEED MORE HELP? www.plantronics.com/support Plantronics, Inc. Plantronics BV 345 Encinal Street South Point Building C Santa Cruz, CA 95060 Scorpius 140 United States 2132 LR Hoofddorp, Netherlands © 2013 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under licence. All other trademarks are the property of their respective owners. Patents pending 89850-07 (02.13)
