Краткое содержание страницы № 1
5 Easy Steps
The fastest way to setup your
CS70 Headset System
Base Power
Adaptor
HL10
Automatic
Handset Lifter*
CS70 Headset
with Ear Tip
CS70
Headset Base
*Not included in all configurations
CS70 Series S e t u p G u i d e
Краткое содержание страницы № 2
CS70 Pa Cegak Ctnetno S Headset Setup Guide Headset Base with Pre- installed Phone Cable Base Power Adapter Ear Tips Please refer to the separate Safety Instructions sheet for important product safety information prior to installation or use of the product. CS70 With Handset Lifter* Adds: HL10 HL10 Automatic User Guide Handset Lifter *Automatic Handset Lifter is bundled with certain CS70 configurations and also available separately. HL10 Additional Parts Kit (if needed) Extender Ringer Ad
Краткое содержание страницы № 3
In Sllat e ra t IP & a ujd St f It 1 Fit the Headset Slide the headset over and behind your ear, then press gently toward your ear. Rotate the microphone boom until it is pointed toward your mouth. If the ear tip is uncomfortable, install a different ear tip. See below. For your safety and comfort, the ear tip should never be inserted into the ear canal. Choose the style and size of Ear Push in firmly and To Install a Different Ear Tip Tip that fits most comfortably. twist retnuoc Remove th
Краткое содержание страницы № 4
Cenno Ct Ba Se ot d e Sk Penoh Use Configuration A if: You will use the Automatic Handset Lifter or… Your phone has NO built-in headset functionality (no Headset button). Configuration A 1. Unplug the handset coil cord from the desk phone handset port [A], then plug it into the negre labeled handset port [B] on the Headset Base. A Handset Handset Coil Cord Headset Base (bottom view) B A 2. Plug the short blkca Phone Cable that is pre-installed on the Headset Base into the now
Краткое содержание страницы № 5
Use Configuration B if: You will NOT use the Automatic Handset Lifter and… Your phone has built-in headset functionality (a Headset button). Configuration B Confirm there is a “HEADSET” button on your phone Headset Base (bottom view) C 1. Plug the short BLACK Phone Cable that is pre-installed on the Headset Base into the Heaset port [C] on the desk phone. HANDSET port or HEADSET port? You should only use the headset port if you will tno be using the Automatic Handset Lifter and yo
Краткое содержание страницы № 6
Cenno Ct Prewo dna Cegrah h dae Ste A. Connect Headset Base to power outlet 1. Plug the Base Power Adapter into a wall outlet, then plug the power cord into the owlley labeled connector on the bottom of the Headset Base. The dre Power light on the left front of the Headset Base will turn on. (See illustration at bottom of page.) Insert into owlley labeled power connection on Headset Base as shown to charge. Base Power Adapter Headset Base (bottom view) B. Charge the Headset for at le
Краткое содержание страницы № 7
In Sllat a tamotu IC h dna Ste l Iretf If you do not have the Lifter, skip to step 5. Why use a handset lifter? The lifter greatly simplifies using a headset with your desk phone. It lets you answer and end calls without being near your phone. The HL10 Automatic Handset lifter is included with certain CS70 configurations and is also available separately. A. Connect Handset Lifter power cord to Headset Base 1. Verify that the base-to-desk Phone Cable is connected to the handset port of the
Краткое содержание страницы № 8
B. Determine Lifter position and height setting 1. Set the Lifter Height Switch to the lowest setting. Handset Lifter Arm Lifter viewed from back Start with Lifter Height Switch in lowest position 2. While wearing your headset, slide the Handset Lifter Arm under the handset until the lifter base touches the side of the phone. 3. Slide the Lifter up to where it nearly touches the handset earpiece. Slide Lifter under handset, then up toward the ear piece 4. Press the Call Control Button o
Краткое содержание страницы № 9
6. Check the Lifter height adjustment by moving the Lifter Height Switch to a higher position. Repeat steps 2. through 4. as necessary. If you hear a dial tone, the lifter height is now set correctly. Please continue with the next section “Mount the Lifter in Permanent Position”. 7. If you still cannot hear a dial tone, Configuration you will need to change the setting Dial on the Configuration Dial. Using a coin or paperclip, turn the Configuration Dial to a different setting
Краткое содержание страницы № 10
m eka a t e St Clla ot Cfno Ierug dna o Pt Im Iez ruoy Sy Smet . 5 To get the best sound quality for both you and your listeners You MUST configure and optimize your system! A. Make the test call 1. If your desk phone has a volume control, set it to mid-range. 2. If you have installed the Automatic Handset Lifter, press the Call Control Button on your headset. If you have tno installed the Automatic Handset Lifter, press the Call Control Button then lift the handset from its cradle (
Краткое содержание страницы № 11
B. Set the Configuration Dial Once you have dialed the Automated Sound Test, follow the prompts to find the setting that gives you the clearest sound. Use a coin or large paperclip to turn the Configuration Dial. Configuration Dial Position Indicator Multiple settings might work with your phone; however, only one is the optimal position. C. Set Listening Volume While listening to the Automated Sound Test, adjust the listening volume by using the Listening
Краткое содержание страницы № 12
u SIgn ruoy CS70 h dae Ste Sy Smet Powering up the Headset If the headset battery is charged and the base is connected to power, the headset is automatically on. The CS70 does not have an on /fof button Talk Indicator Light on Headset Talk Base (negre ) Indicator Light Listening Volume and Mute Button Call Control Button To Place, Answer, or End Calls Desk phone ALL phones with Phones tuohtiw Headset Phones htiw Headset button Configuration Handset Lifter button and NO handset and o
Краткое содержание страницы № 13
To Fine Tune Listening Volume Press [+] to increase. You will hear ascending tones and two tones at the limit. – Press [ ] to decrease. You will hear descending tones and two tones at the limit. Listening Volume Button To Fine Tune Speaking Volume While on a call, you can adjust your speaking volume by using the Speaking Volume Minor Adjustment Control on the back of the base. Listening volume can be adjusted on the headset. Speaking Volume Minor Adjustment Control To s
Краткое содержание страницы № 14
CS70 l Ithg S dna t eno S Indicator Lights Talking/Muted (ngree ) Power (dre ) Charging (ambre ) Base Status Base Light Power on Solid red Headset charging Flashing amber Headset fully charged Solid amber Headset in talk mode Solid green Headset in mute mode Flashing green Headset Status Headset Light Headset in talk mode Flashing amber Tones Out of Range Warning: If you walk out of range of your base, your headset will issue audible tones at its operating limit. If you are on a call, you will
Краткое содержание страницы № 15
t uor Bel Stooh Ign dna Cnommo Qeu St Ino S I can’t hear a dial tone at the headset phone has a handset volume control, lower this until • Make sure your headset is charged. the distortion disappears. • Press the Call Control Button on your headset. • If the distortion is still present, lower the volume • Make sure the lifter is lifting the handset high using the Listen Volume Button on the headset. If the enough to operate the hookswitch; set to a higher distortion persists, select anoth
Краткое содержание страницы № 16
Plantronics Limited Warranty • This warranty covers defects in materials and workmanship of products manufactured, sold or certified by Plantronics which were purchased and used in the United States. • This warranty lasts for one year from the date of purchase of the products. • This warranty extends to you only if you are the end user with the original purchase receipt. • We will, at our option, repair or replace the products that do not conform to the warranty. We may use functionally equiv
