Краткое содержание страницы № 1
™
IntelliG 1000
Model 3024
GARAGE DOOR OPENER
® ®
Includes INTELLICODE 2 Remote Control. Safe-T-Beam System must be installed to close door.
For use only with residential sectional or one piece overhead garage doors.
® ®
Homelink and Car2U compatible.
For Answers and Assistance:
1.800.354.3643
or visit www.geniepro.com
SAVE THIS MANUAL FOR FUTURE REFERENCE.
INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER.
® ®
Homelink is a registered trademark of Johnson Controls Technology Company. Car2U is a
Краткое содержание страницы № 2
SAFETY INFORMATION OVERVIEW OF POTENTIAL HAZARDS READ THIS SAFETY INFORMATION CONVENTIONS USED IN THESE INSTRUCTIONS Garage doors are large, heavy objects that move with the help of springs under high tension and electric motors. Since moving objects, springs under tension, and electric motors can cause injuries, your safety and the safety of others depend on you reading the information in this manual. If you have questions or do not understand the information presented, call your nearest tr
Краткое содержание страницы № 3
OPENER FEATURES ® INTELLICODE 2 Access Security System A new generation superior encryption system that enhances the security of the door opener by continuously changing the access code each time the remote is used. The door opener responds to each new code only once. An access code copied from a working system and tried again will not control the door opener. Wall Console Operates door opener from inside garage. Indicator Light with: Open/Close, Vacation Lock, and Independent Light Contr
Краткое содержание страницы № 4
TABLE OF CONTENTS Section ....................................................................................Page Safety Information .................................................................................................... 2 Opener Features & Safety Features ................................................................... 3 Table of Contents ....................................................................................................... 4 Installation Important Installa
Краткое содержание страницы № 5
IMPORTANT INSTALLATION INSTRUCTIONS W ARNING: T o reduce the risk of severe injury or death: 1. READ AND FOLLOW ALL SAFETY, INSTALLATION 5. Do NOT connect the opener to source of power until AND OPERATION INSTRUCTIONS. (If you have instructed to do so. questions or do not understand an instruction, call 6. Locate the wall console: The Genie Company.) • Within sight of the garage door, 2. Install only on a properly balanced sectional or • At minimum height of 5 feet so small children one
Краткое содержание страницы № 6
©2010 The Genie Company 01/27/2010 6 NOT CE O R C M UC D U O N N H D WARNING PROGRAMMING LIMITS & FORCE (Continuing from Installation Poster 1 if provided) • Make sure doorway is in view and clear of obstacles SETTING & TESTING LIMITS AND FORCE and people to avoid injury or damage to property. The OPEN (UP) and CLOSE (DOWN) Door Limit positions are
Краткое содержание страницы № 7
©2010 The Genie Company 01/27/2010 7 NOT E O R M O R C D OW O A D B) OPEN DOOR TRAVEL LIMIT Travel door to FULL OPEN position 6 8 7 PRESS and HOLD RELEASE PRESS and PRESS RELEASE Watch door move Door Limits are set. Both LEDs go OFF. Continue with FORCE setting. SEE long Blue LED NOTE: You can start and stop door flashing movement using either buttons until door is in correct open or closed position. SET FORCE Force is set automatically with first full 10 OPEN/CLOSE door operat
Краткое содержание страницы № 8
©2010 The Genie Company 01/27/2010 8 PROGRAM INTELLICODE® 2 REMOTE TO POWER HEAD FOR HELP-1.800.354.3643 OR WWW.GENIECOMPANY.COM 2 Bring remote(s) to power head location. WARNING Begin with Step 1 and continue through Step 7 for each button to be programmed. A moving door can cause serious injury or death. NOTE: The following instructions are for the remote(s) provided with this opener. 1. Keep people clear of opening while door is moving. Remote(s) provided with this opener use a Inte
Краткое содержание страницы № 9
©2010 The Genie Company 01/27/2010 9 OPTIONAL PROGRAMMING POWER HEAD TO Homelink®, Car2U®, or IntelliCode® 1 REMOTES and SERIES II WIRELESS KEYPADS To complete any of these tasks you MUST have at least one Genie® IntelliCode® 2 remote button already programmed to the power head. Homelink® or Car2U®: You must also have your Homelink® or Car2U® enabled vehicle present and their programming instructions to perform these programming steps. Genie® remote: You must also have your Genie®
Краткое содержание страницы № 10
NOTICE O R B C M S O S R C ED U L OW ON A D E 3 TYPICAL SECTIONAL DOOR INSTALLATION FOR HELP-1.800.354.3643 OR WWW.GENIECOMPANY.COM INSTALLATION TYPIQUE SUR UNE PORTE SECTIONELLE ..................................POUR OBTENIR DE L’AIDE-1.800.354.3643 INSTALACIÓN HABITUAL DE UNA PUERTA SECCIONAL ...................................PARA OBTENER AYUDA, LLAME AL 1.800.354.3643 *Direct wiring of power supply to opener must be installed by a licensed electrician. *Le câblage direct de l'alimentation
Краткое содержание страницы № 11
O R E OM S BST U TED U DO N O H N LE TYPICAL ONE PIECE DOOR INSTALLATION ............ FOR HELP-1.800.354.3643 OR WWW.GENIECOMPANY.COM INSTALLATION TYPIQUE D’UNE PORTE DE GARAGE D’UNE PIÈCE ..............POUR OBTENIR DE L’AIDE-1.800.354.3643 INSTALACIÓN HABITUAL DE PUERTA DE UNA SOLA PIEZA .....................................PARA OBTENER AYUDA, LLAME AL 1.800.354.3643 *Direct wiring of power supply to opener must be installed by a licensed electrician. *Le câblage direct de l'alimentation é
Краткое содержание страницы № 12
REFERENCE - POWER HEAD & RAIL ASSEMBLED VIEW RÉFÉRENCE – VUE DE LA TÊTE D’ALIMENTATION & DU RAIL ASSEMBLÉ REFERENCIA - VISTA DEL CABEZAL ELÉCTRICO Y RIEL ENSAMBLADOS NOTE: Use wall console and safety sensors provided with this unit. Do NOT substitute wall console or safety sensors. REMARQUE: Utilisez la console sur le mur et les capteurs de sécurité fournis avec cet appareil. NE PAS substituer la console du mur ou les capteurs de sécurité. NOTA: Use la consola de pared y los sensores de seg
Краткое содержание страницы № 13
OVERVIEW OF POWER HEAD CONTROLS 4 This section describes the simple programming Programming Overview functions. Use this page to familiarize yourself with the There are four Power Head program menus: buttons and LED indicators used to program the opener. Remote Program (Default menu) Limits Program Speed Program* Force Program* Programming steps for Limits and remotes found on pages 6 through 9. Controls location *Force and Speed settings are set at the factory and do on power head. To ga
Краткое содержание страницы № 14
OVERVIEW - REMOTES AND OPTIONS 5 WARNING A moving door can cause serious injury or death. 1. Keep people clear of opening while door is FCC and IC CERTIFIED moving. 2. Do NOT allow children to play with opener, This device complies with FCC Part 15 and RSS including wall console, remote, or wireless 210 of Industry Canada. This equipment has been keypad. tested and found to comply with the limits for a 3. During programming, the door opener could Class B digital device, pursuant
Краткое содержание страницы № 15
INTELLICODE® FEATURES Programming to previously installed Series II (IntelliCode® 1) Genie® garage door openers Earlier models of Genie® garage door openers, remotes, and wireless keypads use IntelliCode® Remote(s) provided with this unit can operate 1 signals to communicate. Remote(s) provided earlier (Series II) models of Genie® garage door with this unit will transmit either IntelliCode® 1 or openers. The default Series III (IntelliCode® 2) IntelliCode® 2 signals. frequency must be c
Краткое содержание страницы № 16
LOST OR STOLEN REMOTE - CLEARING MEMORY Clearing remotes from power head memory will clear ALL programmed remotes and wireless keypad. NOTE: Follow the PROGRAM REMOTE TO POWER 4. Press both and HEAD steps to reenter remaining or new remotes. simultaneously on the power head and hold for 5 SECS PROGRAM 5 seconds. 1. Press and hold SET until both lights come ON blue. • Test a remote operation. Remote will not Release button. activate door opener. • Garage door opener will operate
Краткое содержание страницы № 17
6 MAINTENANCE & TROUBLESHOOTING FOR HELP-1.800.354.3643 OR WWW.GENIECOMPANY.COM If you have any questions, please do not hesitate to contact customer service at: 1.800.354.3643 IMPORTANT SAFETY INSTRUCTIONS W ARNING: T o reduce the risk of severe injury or death: 1. READ AND FOLLOW ALL INSTRUCTIONS. 2. Never let children operate or play with the door controls. Keep the remote away from children. 3. Always keep the moving door in sight and away from people and objects until the door is compl
Краткое содержание страницы № 18
NOTICE F DOOR B COMES OBSTRUCTED PULL DOWN ON HANDLE CONTACT REVERSE TEST RESET - OPEN/CLOSE TRAVEL LIMIT The Force and Limit settings MUST be Performing all ten (10) Limits/Force setting steps COMPLETED before testing. (pages 6-7) erases previous Limits/Force settings. 1. Testing. NOTE: The opener will not close the door • Open garage door using wall console. automatically unless the Safe-T-Beam® System is – Place a 2" x 4" board (laid flat) under center of installed and Limits are progra
Краткое содержание страницы № 19
B/W W B/W W Open/Close Button WALL CONSOLE - OVERVIEW Open and closes door from inside garage Use only the Series III wall console provided with this Vacation Lock Button unit. Wall consoles from other manufacturers will not – LOCK disables controls work with this power head. Earlier Genie® Series II after door is completely wall consoles will not work with this power head. closed Wall console has three buttons and one indicator light. – UNLOCK allows controls to Indicator Light
Краткое содержание страницы № 20
CHAIN OR BELT - TENSION ADJUSTMENT WARNING Belt Adjustment required • Observe all safety warning and precautions! • Disconnect power from opener before beginning this task. Visually inspect the chain or belt once per year. Belt • At the center of the rail, is chain or belt resting on Correctly adjusted rail? The chain or belt should not be resting on the rail. Tighten adjustment nut until chain/belt Belt at center of rail does not, at the center of the rail, rest on rail. • Is there
