Руководство по эксплуатации Whynter ICM-15LS

Краткое содержание страницы № 1

WHYNTER STAINLESS STEEL ICE CREAM MAKER


MODEL# : ICM-15LS

Instruction Manual




Congratulations on your new WHYNTER product. To ensure proper operation, please read this
Instruction Manual carefully before using this product. Keep this manual in a safe place for future
reference.
1

Краткое содержание страницы № 2

TABLE OF CONTENTS Safety Precautions 3 Specifications 4 Parts 5 Before using your appliance 5 Ice Cream Recipes Information 5 Installation 6 Ice Cream making and Controls 6 - 7 Troubleshooting 8 Warranty Information 9 2

Краткое содержание страницы № 3

Thank you for your purchase of the Whynter stainless steel ice cream maker. Using this Whynter Ice Cream Maker is simple and effortless because, unlike other ice cream makers, it has its own freezing mechanism. You don’t need salt or ice, so there’s no mess. TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY WHEN USING YOUR ICE WARNING  CREAM MAKER, FOLLOW THESE BASIC PRECAUTIONS:  READ ALL INSTRUCTIONS BEFORE USING THE ICE CREAM MAKER.  WARNING: RISK OF DANGER TO S

Краткое содержание страницы № 4

 Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.  It is important for the appliance to be leveled in order to work properly. For a stable installation, make sure the appliance is placed on a flat, level and solid surface.  When positioning or moving the appliance ensure that it is not turned upside down or greater than 45° or more off level.  To ensur

Краткое содержание страницы № 5

PARTS Transparent lid Control panel Refill lid Removable bowl Blender blade Measuring cup Scoop BEFORE USING YOUR APPLIANCE  Remove the exterior and interior packing.  Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.  Wash all parts that will come into contact with the ice cream (including the fixed bowl, removable bowl,

Краткое содержание страницы № 6

INSTALLATION OF YOUR APPLIANCE Important: Always place the Ice Cream Maker upright on a flat, level and solid surface. 1) Place the removable bowl into the fixed bowl inside the body of the appliance. 2) Insert the blender blade into the motor axis in the middle of removable bowl. (See picture below). 3) Install the transparent lid on top of the bowls and lock it easily. 4) Place the refill lid onto the transparent lid. START MAKING ICE CREAM Mixing indicator "T

Краткое содержание страницы № 7

lights up. During the ice cream making process, you can press [START/STOP] button to turn on/ off the churning function. The cooling function remains on. Note: When the [START/STOP] button is pressed for more than 3 seconds, the appliance will return to initial setup status. When the set operation time has elapsed (LCD displays "00:00"), the operation stops and the appliance will beep 10 times. If the appliance is not turned off in 10 minutes, it automatically enters into a “Extended C

Краткое содержание страницы № 8

8

Краткое содержание страницы № 9

TROUBLESHOOTING Many common ice cream maker problems are easily resolved. Try the troubleshooting suggestions below to see if the problems can be resolved before having to contact the service department. Problem Possible Cause Solution Ice cream maker Mixture is too hard Power off the unit and wait for the mixture churning blade not to be softer working Room’s ambient temperature is too Choose a well-ventilated area with high temperatures above 60°F (16°C) and below 90°F (32°C) Ice c

Краткое содержание страницы № 10

ONE YEAR LIMITED WARRANTY This WHYNTER Ice cream maker is warranted, to the original owner within the 48 continental states, for one year from the date of purchase against defects in material and workmanship under normal use and service. Should your ice cream maker prove defective within one year from the date of purchase, return the defective part or unit, freight prepaid (within two months of purchase; after two months to one year, customer will be responsible for freight cost to W