Краткое содержание страницы № 1
LCD
Color Television
OWNER’S MANUAL
MODELS: DU-30LZ30
DU-42LZ30
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
LG Electronics U.S.A. , Inc.
Краткое содержание страницы № 2
Warning Warning Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Th
Краткое содержание страницы № 3
Safety Instructions Safety Instructions Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. Observing the simple precautions discu
Краткое содержание страницы № 4
Safety Instructions Safety Instructions continued Safety Instructions continued 14. Outdoor Antenna Grounding 19. Servicing If an outside antenna or cable system is connected to the Do not attempt to service this product yourself as opening or product, be sure the antenna or cable system is grounded so removing covers may expose you to dangerous voltage or as to provide some protection against voltage surges and other hazards. Refer all servicing to qualified service per- built-up static charges
Краткое содержание страницы № 5
Contents Contents Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Time Menu Options Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . .25 Manual Clock Setup . . . . . . . . . . . . . . . . . . . . .25 Introduction On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . .25 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Sleep Timer /
Краткое содержание страницы № 6
Introduction Introduction Introduction - This is a simplified representation of front panel. Here shown may be somewhat different from your TV. - This manual explains the features available on the DU-42LZ30 TV. Front Panel Controls Front Panel Controls CH CHANNEL (E E, D D) Buttons VOLUME (F F,G G) Buttons VOL ENTER ENTER Button MENU Button MENU TV TV/VIDEO Button VIDEO /I ON/OFF Button ON/OFF Remote Control Sensor Power Standby Indicator Illuminates brightly when the TV is in standby mode. Dim
Краткое содержание страницы № 7
Introduction Connection Options Connection Options - This manual explains the features available on the DU-42LZ30 TVs. Back Connection Panel Back Connection Panel S-VIDEO Input VIDEO Input AUDIO Input IN2 DVI Input (PC/DTV Input) Monitor Output Digital Audio Inputs (DVI, Component1)/ Digital Audio Output S-Video Input Remote Control Port MONITOR COMPONENT 2 OUTPUT DVD DVI INPUT /DTV DVI COMPONENT1 PC/DVI (PC/DTV INPUT) INPUT OUTPUT A/V INPUT INPUT AUDIO INPUT COMPONENT 1 INPUT1 S-VIDEO (MONO) An
Краткое содержание страницы № 8
TIMER POWER Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. LIGHT MODE Illuminates the remote control buttons. Selects the remote operating mode: TV, VCR, DVD, CABLE, HDSTB or AUDIO. TV/VIDEO Select other operating modes, for the Selects: DTV, Analog, Video1-2, remote to operate external devices. Component 1-2, RGB-DTV (or RGB-PC), POWER DVI-DTV (or DVI-PC) input sources. MODE Turns your TV or
Краткое содержание страницы № 9
TIME R POWER Installation Installation Installation Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. MODE COMP/RGB/DVI FLASHBK MUTE SURF VOL CH SAP RATIO INFO CC ENTER MENU EXIT SOUND VIDEO PLAY PAUSE STOP RECORD REW FF SKIP PIP PIPCH- PIPCH+ PIPINPUT 1.5V FREEZE ZOOM SIGNAL SWAP ADJUST D-sub 15 pin Cable Owner’s Manual Batteries Remote Control Power Cord Installation Instruction I
Краткое содержание страницы № 10
Installation Installation Instruction Installation Instruction - This manual explains the features available on the DU-42LZ30 TVs. Rear Rear A/V Cover A/V Cover * The connection panel is hidden behind the A/V cover. a. Remove the cover. b. Install wires as necessary. c. Reinstall the cover. Position the A/V cover with the TV back panel. d. Align the holes on the TV back panel with the two tuberance on the rear A/V cover and insert. e. Close cover. Wire Holders Wire Holders - Thread, then pull t
Краткое содержание страницы № 11
Installation External Equipment Connections External Equipment Connections Antenna Connection Antenna Connection Analog and Digital TV signals provided on one antenna - Antenna or Cable Service without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket DVI INPUT (PC/DTV INPUT) S-VIDEO Bronze Wire Antenna 2 Antenna1 RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to t
Краткое содержание страницы № 12
Installation NOTE: All cables shown are not included with the TV VCR Setup VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV - Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Connection Option 2 1. Connect the audio and video cables from the
Краткое содержание страницы № 13
Installation External A/V Source Setup External A/V Source Setup How to connect Connect the audio and video cables from the external equip- ment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the MONITOR COMPONENT 2 DVD OUTPUT /DTV INPUT A/V COMPONENT 1 INPUT1 S-VIDEO jack colors (Video = yellow, Audio Left = white, and Audio (MONO) RL R AUDIO L VIDEO Right = red). AUDIO INPUT VIDEO INPUT How to use 1. Select the input source wi
Краткое содержание страницы № 14
Installation HDSTB Setup HDSTB Setup - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. - This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for DTV (480p,720p,1080i) mode. COMPONENT 2 MONITOR DVD OUTPUT MONITOR /DTV COMPONENT 2 OUTPUT DVI COMPONENT1 PC/DVI DVI COMPONENT1 PC/DVI INPUT DV
Краткое содержание страницы № 15
Installation PC Setup PC Setup - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. The TV sends config- uration information (EDID) to the PC using the Video Electronics Standard Association (VESA) Display Data Channel (DDC) protocol. - The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card. card, change the screen scanning rate for the graphic card accordingly. How to connect 1. To get the best picture quality, adjust the
Краткое содержание страницы № 16
Operation Operation Operation Screen Setup for PC mode Screen Setup for PC mode - Be sure to select the RGB-PC/RGB-DTV source before operation. (For RGB-DTV input source, Position and Reset are available.) - In DVI-PC and DVI-DTV input source, settings are not adjustable. - You can manually adjust picture position and minimize image shaking for the PC input source. Adjustment for screen Position, Clock, and Phase Adjustment for screen Position, Clock, and Phase 1. Press the ADJUST button and t
Краткое содержание страницы № 17
Operation Turning the TV On Turning the TV On Turning on the TV just after installation 1. Connect power cord correctly. 2. Press the ON/OFF button on the TV. At this moment, the TV is switched to standby mode. Press the TV/VIDEO, CH (D D / E E) button on the TV or press the POWER, TV/VIDEO, COMP/RGB/DVI, CH (+, -), Number (0 ~ 9) button on the remote control and then the TV will switch on. Turning on the TV (power cord is still connected) 1. If the TV was turned off with the ON/OFF button
Краткое содержание страницы № 18
Operation Setup Menu Options Setup Menu Options EZ Scan (Channel Search) EZ Scan (Channel Search) - Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. - Run EZ Scan again after any Antenna/Cable connection changes. EZ Scan ANT 1 ANT 2 ANT 1 ANT 2 ANT 1 ANT 2 ANT 1 ANT 2 SETUP Ch.Edit Air Cable Cable Air Air Cable VIDEO DTV Signal Select DTV cable band, Select antenna input, Select antenna input, Select antenna input, Select
Краткое содержание страницы № 19
Operation DTV Signal Strength DTV Signal Strength - Reveals how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. - Digital DTV Signals: May not be available in all areas, nor are broadcast on all programs. 1. Press the SIGNAL button. 2. View the on-screen signal strength monitor to see the quality of the signal being received. • You can also check the DTV Signa
Краткое содержание страницы № 20
Operation Setup Menu Options continued Setup Menu Options continued Main Picture Source Selection Main Picture Source Selection - Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to your TV. 1. Press the MENU button and then use button to select the SETUP menu. D D / E E EZ Scan SETUP 2. Press the G G button and then use button to select Main Input. D D / E E Ch.Edit DTV VIDEO DTV Signal Analog 3. Press the G G button and
