Краткое содержание страницы № 1
™
RAZOR LED LCD HDTV
E190VA / E220VA / E260VA – user manual
Краткое содержание страницы № 2
® This product qualifies for ENERGY STAR in the “factory HDMI, the HDMI logo and High-Definition Multimedia SRS TruSurround HD and SRS TruVolume are trademarks default” setting and this is the setting in which power of SRS Labs, Inc. TruSurround HD and TruVolume Interface are trademarks or registered trademarks of HDMI savings will be achieved. Changing the factory default Licensing LLC. technologies are incorporated under license from SRS picture settings or enabling other features will i
Краткое содержание страницы № 3
Welcome Thank You for Choosing VIZIO My Product Information And congratulations on your new VIZIO HDTV. To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts. Product Registration To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at www.VIZIO.com or call toll free at
Краткое содержание страницы № 4
E190V A / E220V A / E260V A to rain or moistur e, does not operate normally or has been dr opped. Important Safety Instructions • Unplug the power cor d befor e cleaning your TV . Your DTV is designed and manufactured to operate within defined design • When moving your TV fr om an ar ea of low temperatur e to an ar ea of limits. Misuse may result in electric shock or fire. To prevent your TV from being high temperatur e, condensation may form in the housing. W ait befor e damaged, the
Краткое содержание страницы № 5
E190V A / E220V A / E260V A • Do not overload power strips and extension cor ds. Overloading can cause the batteries to leak which can damage the r emote contr ol or r esult in fir e or electric shock. injur e the operator . Do not expose batteries to excessive heat such as sunshine, fir e or the like. • The wall socket should be installed near your TV and easily accessible. • If any of the following occurs, contact the dealer: • Only power of the marked voltage can be used for your
Краткое содержание страницы № 6
E190V A / E220V A / E260V A Television Antenna Connection Protection DTV Transition Advisory If an outside antenna/satellite dish or cable system is to be connected to the TV, The nationwide switch to digital television broadcasting was complete on June make sure that the antenna or cable system is electrically grounded to provide 12, 2009. Analog-only television sets that receive TV programming through an some protection against voltage surges and static charges. antenna now need a converte
Краткое содержание страницы № 7
Table of Contents Setting the Time Zone .......................................................................... 13 Installing the TV .......................................................................1 Adjusting the Time for Daylight Savings .............................................. 14 Inspecting the Package Contents ........................................................... 1 Enabling or Disabling Automatic Date and Time Updates................... 14 Installing the TV ...........
Краткое содержание страницы № 8
E190VA / E220VA / E260VA Changing the Parental Control Passcode ............................................ 27 Legal & Compliance .................................................................35 Resetting the Content Locks ............................................................... 27 FCC Class B Radio Interference Statement ........................................ 35 Viewing System Info and Resetting to Factory Defaults ......................... 28 Notice .............................
Краткое содержание страницы № 9
Installing the TV 1 Inspecting the Package Contents Installing the TV Before installing your new TV, take a moment to inspect the package contents. After removing the TV from the box and inspecting the package contents you can Use the images below to ensure nothing is missing or damaged. begin installing the TV. Your TV can be installed in two ways: When you have completed your inspection, install the TV. • On a flat surface, using the included stand • On a wall, using a VESA-standard wall mo
Краткое содержание страницы № 10
E190VA / E220VA / E260VA 1 3. Slide the base plate into the slot on the Be sure the mount you choose is capable of supporting the weight of the TV. After stand until it snaps into place. you have determined that you have the correct mount for your TV, you can begin the installation. To install your TV on a wall: 1. Disconnect any cables connected to your TV. 4. Move the TV with attached stand into an upright position and place on a flat, level, and stable surface.
Краткое содержание страницы № 11
Controls and Connections 2 Front Panel Right Side Panel Ambient Light Sensor Power Menu Channel Up/Down Remote Control Sensor Volume Up/Down Front Panel Input Remote Control When using the remote, point it directly at this sensor. Right Side Panel Sensor: (For E190VA, sensor is located on right side panel.) Ambient Light Activate through the on-screen menu. When activated, Left Side Panel Sensor: the sensor adjusts the brightness of the TV based on the light level in the room. (On E220VA an
Краткое содержание страницы № 12
E190VA / E220VA / E260VA 2 Rear Panel Remote Control Optical Audio RGB Power/Standby Input Input (Specific) Wide Closed Caption (CC) Sleep Exit Arrow Up Menu/OK AC IN HDMI (1,2) Component Cable/Antenna Arrow Left Arrow Right Rear Panel Optical: Connect to audio device (VIZIO sound bar, home theater Arrow Down system). Audio: Connect 1/8” mini stereo connector from computer. RGB: Connect RGB cable from computer. Channel Volume Up/Down AC IN: Connect the included Power Cable here. Connect the o
Краткое содержание страницы № 13
E190VA / E220VA / E260VA 2 Replacing the Batteries Input: Change the input device. With each press of the button, the TV will display a different input. 1. Remove the battery cover. Input (Specific): Change the input device. Press the button that 2. Insert two AA batteries into the remote corresponds to the input device you wish to view. control. Make sure that the (+) and (-) Power/Standby: Turn the TV on or off. symbols on the batteries match the Sleep: Activate the sleep timer. With eac
Краткое содержание страницы № 14
Completing the First-Time Setup 3 The first time you turn on the TV, the Setup App will guide you through each of the 4. If the TV is connected to an external Initial Setup Tuner steps necessary to get your TV ready for use. antenna, select Antenna, then press Please select your input source: Antenna Cable Right Arrow and go to step 5. Before you begin the first-time setup: If the TV is connected to a cable • Y our TV should be installed and the power cor d should be connected service wi
Краткое содержание страницы № 15
Connecting Your Devices to the TV 4 Your HDTV can be easily connected to an external device: Connecting Your Devices • DVD or Blu-Ray player Once you have determined the best available connection type on both your • Video game console device and the TV, ensure you have the corresponding cable. • Cable box To connect a device to the TV: • Exter nal antenna 1. Ensure both the TV and your device are off. • Or other device 2. Connect the device and the TV. Use the best available connection. Se
Краткое содержание страницы № 16
E190V A / E220V A / E260V A 4 Select one of the connection types. Use the cable(s) shown to connect the TV to your device. Select One: HDMI DIGITAL BEST OR RF/ DIGITAL / COAXIAL ANALOG OR RGB ANALOG BETTER OR COMPONENT ANALOG OR COMPOSITE ANALOG AV GOOD Device Connection Chart 8
Краткое содержание страницы № 17
Adjusting the TV Settings 5 From the TV Settings Menu, you can: Customizing and Removing Input Names • Change the input sour ce When you have multiple devices connected to your TV, it can become difficult to • Set up channels remember the inputs to which they are connected. Your TV features the ability to • Change the on-scr een menu language customize the names of these inputs to make them easy to remember. (Custom names have a 10-character limit.) • Change the TV’ s date and time • Adj
Краткое содержание страницы № 18
E190V A / E220V A / E260V A 5 Removing Unused Inputs from the Input List Setting Up Channels To remove unused inputs: From the channel menu you can: 1. Press the MENU button on the remote. • Change the signal sour ce The on-screen menu is displayed. • Customize the master channel list 2. Use the Arrow buttons on the remote • Scan for new/additional channels to highlight the Input icon and press MENU/OK. • Start a new channel scan • Customize channel names 3. Use the Arrow buttons to hig
Краткое содержание страницы № 19
E190V A / E220V A / E260V A 5 Customizing the Master Channel List Scanning for New or Additional Channels By customizing the master channel list, you can choose which channels can be When a new channel becomes available in your area, you do not have to rescan displayed. all channels to add the new channel. Using the add channel feature, you can restrict the scan to new channels only. 1. Press the MENU button on the remote. The on-screen menu is displayed. This is useful because your master c
Краткое содержание страницы № 20
E190V A / E220V A / E260V A 5 Scanning for Channels Customizing Channel Names Before the TV can detect and display channels and their associated information, Your TV features the ability to customize channel names, making them easy to you must scan for channels. A channel scan may also be necessary when the identify. (Custom names have a 10-character limit.) TV has been moved to an area where different free-to-air broadcast television For example, KBOT-DT could be renamed as Favorite. channels
