Руководство по эксплуатации Edelbrock 6894

Краткое содержание страницы № 1

TUBULAR EXHAUST SYSTEM (T.E.S.)
Catalog #6893 - 1993 Camaro/Firebird, 5.7L V8,
Standard and Auto Transmission, with A.I.R.
Catalog #6894 - 1994-1995 Camaro/Firebird, 5.7L V8
Standard and Auto Transmission, with A.I.R.
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Tubular Exhaust System (TES). If you have any
questions or problems, please call our Technical Hotline: 1-800-416-8628, 7am - 5pm, Monday-Friday, Pacific
Standard Time or e-mail us at:

Краткое содержание страницы № 2

INSTALLATION INSTRUCTIONS 1. Disconnect negative battery cable. 2. Raise vehicle and remove O2 sensors from right and left sides being careful not to damage. 3. Unbolt and remove exhaust pipe/catalytic converter assembly. Before removing exhaust pipe/catalytic converter assembly determine the position of catalytic inlet for re-installation. Either note measurements or mark bottom of floorboard with chalk to show catalytic location (Do not damage converter). DISASSEMBLY AND ASSEMBLY Right Side

Краткое содержание страницы № 3

Extension Pipe 1. Cut O.E.M. exhaust pipe approximately 1/2” to 3/4” in front of the catalytic. 2. Bolt catalytic back into vehicle with front in original location. 3. Install T.E.S. pipe over catalytic inlet and bolt to T.E.S. manifold using donut gaskets provided. 4. With everything in place, tack weld T.E.S. to catalytic. Note: Tig welding is desirable but gas welding can be used. 5. After tack welding, remove assembly and complete weld. 6. Re-install assembly and tighten all bolts. 7. Check