Краткое содержание страницы № 1
LCD TV
MODEL LCD-32CA9S
LCD-37CA9S
LCD-42CA9S
Owner’s Manual
LCD-CA9S-A NEW.indd 1 2/06/2008 2:07:42 PM
Краткое содержание страницы № 2
TO THE OWNER Before operating this LCD TV, read this manual thoroughly and operate the LCD TV properly. This LCD TV provides many convenient features and functions. Operating the LCD TV properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your LCD TV seems to operate improperly, read this manual again, check o
Краткое содержание страницы № 3
SAFETY INSTRUCTIONS All the safety and operating instructions should be Do not install the LCD TV near the ventilation duct read before the product is operated. of air-conditioning equipment. Read all of the instructions given here and retain This LCD TV should be operated only from the type them for later use. Unplug this LCD TV from AC of power source indicated on the marking label. power supply before cleaning. Do not use liquid or If you are not sure of the type of power sup
Краткое содержание страницы № 4
TABLE FEATURE AND DESIGN .....................................5 TEXT YELLOW 23 PREPARATION........................................6 TEXT BLUE 23 PART NAMES AND FUNCTIONS 6 MENU OPERATION (TV/AV MODE)..............24 CONNECTING LCD TV.......................8 CHANNEL 24 CONNECTING THE AC POWER CORD 8 PICTURE 26 CONNECTING OUTDOOR AERI
Краткое содержание страницы № 5
Feature and Design Picture Compatibilty Full Multy System High Definition LCD Panel PAL, SECAM, NTSC, NTSC 4.43 system can 1366 x 768 pixel HD LCD Panel with high be connected. (see page 17) contrast ratio and wide viewing angle. HD-Ready VIZON Engine VIZON Engine, SANYO High Quality Image 1080p, 1080i, 720, High Definition signals Processing Technology reproduces clear, are receivable. dynamic, natural and realistic picture along HDMI with HD LCD Panel Technology. HDMI provides
Краткое содержание страницы № 6
PREPARATION PART NAMES AND FUNCTIONS FRONT Panel Side Controls Indicator INDICATORS Power Indicator Timer Indicator Infrared Remote Receiver CARE FOR USING LCD TV Do not bump or scratch the panel surface as this causes flaws on the surface of the screen. There may be some tiny black points and/or blight points on the SCREEN. These points are normal. 6 LCD-CA9S-A NEW.indd 6 2/06/2008 2:07:47 PM
Краткое содержание страницы № 7
PREPARATION (Each button on the control panel has the same function with its counterpart on the SIDE CONTROLS remote control. ) Used to Change channels. Used to select items. VOLUME (+/-) buttons Used to adjust the volume. Used to adjust the value of the selected item on On- Screen Menu. Used to execute the selected menu on On-screen menu. INPUT MODE button Used to select input source: PC, HDMI2, HDMI1, TV, AV1-S, AV2-DVD. POWER ON/ OFF button MENU button Used to turn the LCD Open or clos
Краткое содержание страницы № 8
CONNECTING LCD TV CONNECTING THE AC POWER CORD This LCD TV uses nominal input voltages of 110-242V AC. This LCD TV automatically selects the correct input voltage. It is designed to work with single-phase power systems. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the LCD TV with all peripheral equipment before turning the LCD TV on. CAU
Краткое содержание страницы № 9
Audio Input PC HDMI (stereo) Input Input CONNECTING LCD TV CONNECTING A COMPUTER Cable used for connection (This cable is not supplied with this NOTE: LCD TV.) When connecting the cable, AC PC/VGA Cable (D-SUB 15pin) Power Cords of both LCD TV HDMI Cable: HDMI Input and external equipment should be disconnected from AC outlet. MAC Adapter (in the case of connecting Macintosh computer) Turn LCD TV and peripheral Audio Cable [Mini Plug (L/R)] equipment on before your computer is
Краткое содержание страницы № 10
CONNECTING LCD TV CONNECTING VIDEO EQUIPMENT Cables used for connection (These cables are not supplied with this LCD TV.) Video Cable(RCA X1), S-Video Cable, Audio Cable (RCA X2) : Video 1 or Video 2 Video Cable(RCA X3), Audio Cable (RCA X2) : DVD (Component Video) Video Cable(RCA X1), Audio Cable (RCA X2) : Monitor Outputs HDMI Cable: HDMI Input NOTE : When connecting the cable, AC Power Cords of both LCD TV and external equipment should be disconnected from AC outlet. Component Video
Краткое содержание страницы № 11
BEFORE OPERATION OPERATION OF REMOTE CONTROL INPUT button POWER ON/OFF button MAIN/SUB button PIP button ECO button CHANGE button TIMER button Display button NUMERIC buttons MUTE button DIGIT button / / / button CHANNEL RECALL button STILL button MENU button SOUND SYSTEM button BACK button COLOUR SYSTEM button WIDE button VIDEO MODE button STEREO/MONO button AUDIO MODE button TXT/TV button SPORTS button BASS button Note: 1. "USB", "POP", "WOW HD" and "WOOFER" buttons are not used.
Краткое содержание страницы № 12
BEFORE OPERATION OPERATION RANGE Point Remote Control toward LCD TV (Infrared Remote Receiver) whenever pressing the buttons. Maximum operating range for Remote Control is about 16.4’ (5m) in front, about 30° to the left or the right, about 15° for up or down. 30 30 Infrared Remote Receiver 5m REMOTE CONTROL BATTERIES INSTALLATION Remove the battery compartment cover . Insert two size AAA batteries (1.5V) 1 2 according to "+" and "-" polarity markings inside the battery compartment. Clo
Краткое содержание страницы № 13
BEFORE OPERATION ON-SCREEN MENU TV/AV MODE MENU LIST Note: "CHANNEL" menu is only active in TV mode. MAIN MENU (CHANNEL MENU) CHANNEL MENU PICTURE MENU SOUND MENU SOUND MODE BASS 50 TREBLE 50 BALANCE 50 ADJ BACK BACK MENU EXIT SEL 13 LCD-CA9S-A NEW.indd 13 2/06/2008 2:08:06 PM
Краткое содержание страницы № 14
BEFORE OPERATION ON-SCREEN MENU TV/AV MODE MENU LIST MAIN MENU (CHANNEL MENU) TIMER MENU OFF TIMER OFF ON TIMER - - : - - ON TIMER CH 29 SELECT SEL A ADJUST DJ BACK BACK BACK MENU EXIT EXIT OSD MENU LANGUAGE H-POSITION V-POSITION DURATION 15 SEC TRANSPARENCE TTX LANGUAGE WESTERN SEL ADJ BACK BACK MENU EXIT SYSTEM MENU ECO CHILD LOCK PC ADJUST 14 LCD-CA9S-A NEW.indd 14 2/06/2008 2:08:10 PM
Краткое содержание страницы № 15
BEFORE OPERATION ON-SCREEN MENU PC/HDMI MODE MENU LIST MAIN MENU (PICTURE MENU) SYSTEM MENU ECO CHILD LOCK PC ADJUST AUTO ADJUST START H-POSITION V-POSITION CLOCK PHASE SEL ADJ BACK BACK MENU EXIT Note: 1. "PC ADJUST" is only active in PC mode. 2. SOUND/ TIMER/ OSD menu in PC/ HDMI mode is the same as TV/AV mode, please refer to pages 13~14. 15 LCD-CA9S-A NEW.indd 15 2/06/2008 2:08:13 PM
Краткое содержание страницы № 16
BASIC OPERATION TURNING ON / OFF LCD TV Complete the peripheral connections before turning on LCD TV. (Please refer to "CONNECTING LCD 1 TV".) Connect LCD TV's AC Power Cord into an AC outlet. 2 Press POWER ON/OFF button on Side Controls of LCD TV or on Remote Control to turn it ON. The 3 POWER indicator will light up (green). Press POWER ON/OFF button again to shift it to stand-by status, the POWER indicator will become red. NO SIGNAL SHUT OFF This TV set incorporates the NO SIGNAL SHUT OFF
Краткое содержание страницы № 17
BASIC OPERATION SOUND SYSTEM Press SOUND SYSTEM button repeatedly to select "D/K", "I", "M" or "B/G" until the best sound effect is reached. COLOUR SYSTEM Press COLOUR SYSTEM button repeatedly to select "AUTO", "PAL", "SECAM", "NTSC" or "NTSC4.43" until the best colour effect is reached. DISPLAY Press DISPLAY button on Remote Control to display the status of LCD TV. Press again to remove the dis- play. Channel 11 Colour System AUTO D/K Sound System MONO Stereo/Mono VOLUME CONT
Краткое содержание страницы № 18
BASIC OPERATION VIDEO MODE Simply press VIDEO MODE button on Remote Control to select the following video signals: PERSONAL User presets picture adjustment in Picture mode. PERSONAL STANDARD STANDARD Natural and splendid picture level preset on this LCD TV. DYNAMIC DYNAMIC Bright and dynamic picture. It is suitable for nice playback, such as DVD program. SOFT SOFT Inhibit strong contrast and colour, it is beneficial for eye protection. AUDIO MODE Simply press AUDIO MODE button on Remote C
Краткое содержание страницы № 19
BASIC OPERATION WIDE WIDE button Select screen size among "Full", "Zoom", "Zoom[Caption-IN]", "Normal" and "Natural Wide" by pressing WIDE button on Remote Full * Controls. Zoom * Only "Full" mode can be selected when the input mode is Zoom [Caption-IN] "VGA" , "HDMI" or "DVD" and the input signal is 1080i, 720p or 1080p. Normal Full Natural Wide Provides image to fit width of screen by expanding image width uniformly. This function can be used for enjoying a squeez
Краткое содержание страницы № 20
BASIC OPERATION OFF TIMER To set OFF TIMER by pressing TIMER button on Remote Control. The timer dialogue box will appear on the screen for a short while. To select "0 min", "30 min", "60 min", "90 min" or "120 min" with TIMER buttons. PIP OPERATION Using PIP function, you can enjoy a TV program and an image such as DVD input from a rear terminal at the same time. Press PIP button to display sub picture. 1 Each time PIP button is pressed, the location of sub picture is changed as follows. 2 D
