Краткое содержание страницы № 1
227E3L
www.philips.com/welcome
EN User manual 1
Customer care and warranty 29
Troubleshooting & FAQs 34
Краткое содержание страницы № 2
Table of Contents 1. Important................................................1 1.1 Safety precautions and maintenance...1 1.2 Notational Descriptions.............................2 1.3 Disposal of product and packing material ................................................................3 2. Setting up the monitor.........................4 2.1 Installation...........................................................4 2.2 Operating the monitor...............................6 2.3 Remove Base Stan
Краткое содержание страницы № 3
1. Important is missing, please contact with your local 1. Important service center. (Please refer to Customer Care Consumer Information Center) This electronic user’s guide is intended for Do not subject the monitor to severe anyone who uses the Philips monitor. Take time vibration or high impact conditions during to read this user manual before you use your operation. monitor. It contains important information and notes regarding operating your monitor. Do not knock or drop the monit
Краткое содержание страницы № 4
1. Important IMPORTANT: Always activate a moving 1.2 Notational Descriptions screen saver program when you leave The following subsections describe notational your monitor unattended. Always activate conventions used in this document. a periodic screen refresh application if your monitor will display unchanging Notes, Cautions and Warnings static content. Uninterrupted display of Throughout this guide, blocks of text may be still or static images over an extended accompanied by an ic
Краткое содержание страницы № 5
1. Important Recycling Information for Customers 1.3 Disposal of product and packing Your display is manufactured with high quality material materials and components which can be Waste Electrical and Electronic Equipment- recycled and reused. WEEE To learn more about our recycling program please visit www.philips.com/about/sustainability/ recycling. This marking on the product or on its packaging illustrates that, under European Directive 2002/96/EC governing used electrical and electroni
Краткое содержание страницы № 6
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2.1 Installation Package contents Register your product and get support at 227E3 www.philips.com/welcome Quick Start 2. Hold the base stand with both hands and firmly insert the base stand into the base column. (1) Gently attach the base to the base column until the latch locks the base. (2) Use your fingers
Краткое содержание страницы № 7
2. Setting up the monitor Connecting to your PC Model 227E3LPH: Model 227E3L: 5 6 4 5 AC power input VGA input DVI-D input Kensington anti-theft lock AC power input Model 227E3LH: VGA input DVI-D input HDMI input HDMI audio output 5 Kensington anti-theft lock 5 6 7 Connect to PC 1. Connect the power cord to the back of the monitor firmly. 6 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of yo
Краткое содержание страницы № 8
2. Setting up the monitor Model 227E3LH: 2.2 Operating the monitor 5 762 4 3 Switch monitor’s power ON and OFF. Access the OSD menu. Return to previous OSD level. Front view product description Adjust the speaker volume. Model 227E3L: Adjust the OSD menu. 5 Change the signal input source. SmartImage Lite. There are three modes to be selected: Standard, 762 4 3 Internet and Game. Switch monitor’s power ON and Model 227E3LPH: OFF. 5 Access the OSD menu. Return to previous OSD level.
Краткое содержание страницы № 9
2. Setting up the monitor Description of the On Screen Display Basic and simple instruction on the control keys What is On-Screen Display (OSD)? In the OSD shown above, you can press On-Screen Display (OSD) is a feature in all buttons at the front bezel of the monitor Philips LCD monitors. It allows an end user to to move the cursor, and press OK button to adjust screen performance or select functions confirm the choice or change. of the monitors directly through an on-screen instructio
Краткое содержание страницы № 10
2. Setting up the monitor Resolution notification 2.3 Remove Base Stand and Base This monitor is designed for optimal Remove the Base Stand performance at its native resolution, 1920 × 1080 @ 60 Hz. When the monitor is powered Before you start disassembling the monitor on at a different resolution, an alert is displayed base, please follow the instructions below to on screen: Use 1920 × 1080 @ 60 Hz for best avoid any possible damage or injury. results. 1. Place the monitor face down on a s
Краткое содержание страницы № 11
2. Setting up the monitor Remove the base 1. You may use a flathead screwdriver to stick into two release hols on the hinge cover, and gently pry the hinge cover to have it removed. 2. Remove 4 screws and then remove the base from the monitor. 9
Краткое содержание страницы № 12
3. Image Optimization 3. The SmartImage Lite on screen display 3. Image Optimization will remain on screen for 5 seconds or you can also press OK button to make confirmation. 3.1 SmartImage Lite 4. When SmartImage Lite is enabled, the sRGB scheme is disabled automatically. To What is it? use sRGB you need to disable SmartImage SmartImage Lite provides presets that Lite with the button at the front bezel optimize display for different types of content, of your monitor. dynamically adjus
Краткое содержание страницы № 13
3. Image Optimization Follow the instruction and complete the 3.2 SmartContrast installation. What is it? You can launch after installation is Unique technology that dynamically analyzes completed. displayed content and automatically optimizes If you want to launch later, you can either a LCD monitor's contrast ratio for maximum click the shortcut on desktop or toolbar. visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming ba
Краткое содержание страницы № 14
3. Image Optimization Start with Standard pane: Adjust menu: Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. You can follow the instruction and do the adjustment. Cancel prompts user if you want to cancel installation. 12
Краткое содержание страницы № 15
3. Image Optimization Color menu: Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage Lite (Please refer to SmartImage Lite section). You can follow the instruction and do the adjustment. Refer to below table for sub-menu item base on your input. Example for Color Calibration: 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return
Краткое содержание страницы № 16
3. Image Optimization First color Calibration Screen: Previous button is disabled until the second color screen. Next goes to the succeeding target (6-targets). Final next goes File>Presets pane. Displays current preference settings. A checked box enables the feature. The Cancel closes the UI and returns to the check box is a toggle. plug in page. Enable Context Menu on desktop is SmartImage Lite checked (On) by default. Enable Context Allows user to change setting for better d
Краткое содержание страницы № 17
3. Image Optimization menu. On a non-supported display capable of Help>User Manual - Will only be active when DDC/CI, only the Help and Options tabs are selecting User Manual from the drop-down available. All other SmartControl Lite tabs are Help menu. On a non-supported display not available. capable of DDC/CI, only the Help and Options tabs are available. Display the Source instruction pane and Help>Version - Will only be active when current input source setting. selecting Version from
Краткое содержание страницы № 18
3. Image Optimization Context Sensitive menu Technical Support - displays the tech support page. The Context Sensitive menu is Enabled by default. If Enable Context Menu has been Check for Update - takes the user to PDI checked in the Options>Preferences pane, then Landing and checks the user's version the menu will be visible. against the most current available. About - Displays detailed reference information: product version, release information, and product name. Exit - Close Sma
Краткое содержание страницы № 19
4. PowerSensor 4. PowerSensor™ (Available for model 227E3LPH only) PowerSensor is a unique environmentally friendly technology from Philips which enables user to save up to 80% of power consumption. In line with Philip’s Sense and Simplicity Promise, this user friendly technology works for you right out of the box without any hardware or software installation, and without any user intervention in the default mode. How does it work? PowerSensor works on principle of transmission and reception
Краткое содержание страницы № 20
4. PowerSensor Power Sensor 3 How to adjust settings If PowerSensor is not operating correctly inside or outside the default range, here’s how to fine-tune detection: Press the PowerSensor hot key. You will find the default position ‘3’ on the adjustment bar. Adjust the PowerSensor detection adjustment to Setting 4 and press OK. Test the new setup to see if PowerSensor properly detects you in your current position. Note A manually selected PowerSensor mode will remain operational unless a
