Краткое содержание страницы № 1
Operating Instructions
High Defi nition Plasma Display
Model No.
TH-103PF10EK
The illustration shown is an image.
Please read these instructions before operating your set
and retain them for future reference.
English
Краткое содержание страницы № 2
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http://p
Краткое содержание страницы № 3
Important Safety Notice WARNING 1) To prevent damage which may result in fi re or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water (fl ower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.) No naked fl ame sources, such as lighted candles, should be placed on / above the set. 2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualifi ed service personnel. 3)
Краткое содержание страницы № 4
Safety Precautions WARNING Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Pedestal .................................................................... TY-ST103PF9 • Wall-hanging bracket (vertical) .................................. TY-WK103PV9
Краткое содержание страницы № 5
Safety Precautions When using the Plasma Display The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Plasma Display to overheat, which can cause fi re or damage to the Plasma Display. Do not stick any foreign objects into the Plasma Display. • Do not insert any metal or fl ammable objects into the ventilations holes or drop them onto the Plasma Display, as doing so can cause fi re or electric shock. Do not remove the
Краткое содержание страницы № 6
Safety Precautions CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display. • Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result. Be sure to disconnect all cables before moving the Plasma Display. • If the Plasma Display is moved while some
Краткое содержание страницы № 7
Accessories Accessories Supply Check that you have the accessories and items shown Operating Instruction book Remote Control Batteries for the Remote Transmitter Control Transmitter EUR7636090R (2 × R6 (UM3) Size) Eyebolt cap × 3 Power supply cord × 2 Fixing bands × 2 Remote Control Batteries Requires two R6 batteries. 2. Insert batteries - note correct 3. Replace the cover. 1. Pull and hold the hook, then open polarity ( + and -). the battery cover. + - + - “R6 (UM3)” size Helpful Hint: For f
Краткое содержание страницы № 8
Connections AUDIO OUT Terminals connection RL AUDIO OUT Stereophonic sound code AC cord connection (see page 12) audio equipment line-in – AC cord fi xing Close Unplug the AC cord Push until the hook clicks. Unplug the AC Open cord pressing Plug the AC cord into the display unit. the two knobs. Plug the AC cord until it clicks. Fix the AC cord with the clamper. Note: 2. Pull off. When disconnecting the AC Note: cord, be absolutely sure to 1. Keep the knob Make sure that the AC cord is
Краткое содержание страницы № 9
Connections PC Input Terminals connection COMPUTER AUDIO PC IN Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input Terminal. • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 4
Краткое содержание страницы № 10
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. COMPUTER 13 2 45 67 8 9 SERIAL RS-232C Straight cable Pin layout for SERIAL Terminal D-sub 9p Notes: • Use the RS-232C cable to connect the computer to the Plasma Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface specifi cation, so that the Pla
Краткое содержание страницы № 11
Connections DVI-D connection This unit has terminal boards equivalent to DVI-D Terminal Board for PF Series (TY-FB9FDD) and BNC Component Video Terminal Board (TY-42TM6A) as standard equipment. PC with DVI-D DVI-D video out video cable AUDIO (Within 5 m) DVI-D IN SLOT2 Mini-plug (M3) DVI-D Input Connector Pin No. Signal Name Pin No. Signal Name Pin Layouts 1 T.M.D.S. data 2- 13 T.M.D.S. data 3+ 2 14 T.M.D.S. data 2+ +5 V DC 3 15 T.M.D.S. data 2/4 shielded Ground 24 17 4 16 T.M.D.S. dat
Краткое содержание страницы № 12
Power On / Off Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 8) Connecting the plug to the Wall Outlet Notes: • Main plug types vary between countries. The power plug shown at right may, therefore, not be the type fi tted to your set. Right side surface • When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet fi rst. Main Power On / Off Switch Press the Power s
Краткое содержание страницы № 13
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: INPUT1 INPUT2 INPUT3 PC Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the input mode. This button is used to switch directly to INPUT mode. These buttons can only display the slot w
Краткое содержание страницы № 14
Basic Controls Main Unit Right side Enter / Aspect button surface (see page 16, 18) Volume Adjustment ENTER/ Volume Up “+” Down “–” When the menu screen is displayed: + / “+” : press to move the cursor up VOL “–” : press to move the cursor down - / (see page 16) MENU Remote control sensor MENU Screen ON / OFF Power Indicator INPUT Each time the MENU button is pressed, the The Power Indicator will light. menu screen will switch. (see page 16) • Power-OFF ........ Indicator not illuminated
Краткое содержание страницы № 15
Basic Controls Remote Control Transmitter Status button R button (see page 17) Press the “Status” button to display Press the R button to return to previous menu screen. the current system status. 1 Input label Standby (ON / OFF) button 2 Aspect mode (see page 18) The Plasma Display must fi rst be plugged into Off timer 3 the wall outlet and turned on at the power switch The off timer indicator is displayed only (see page 12). when the off timer has been set. Press ON to turn the Plasma Di
Краткое содержание страницы № 16
On-Screen Menu Displays To Picture adjust menu The MENU button on the unit can also 1 Press to select. (see page 23) be pressed. Picture 1/2 - / Normalise Normal MENU Right side Picture Mode Normal Contrast 25 surface INPUT Brightness 0 [ from the unit ] Colour 0 Right side surface Hue 0 Each time the MENU button is pressed, Sharpness 5 the menu screen will switch. ENTER/ 2 Normal Viewing Picture Setup + / Picture 2/2 Sound Pos. /Size VOL 1 - / White balance Normal Off Colour
Краткое содержание страницы № 17
On-Screen Menu Displays Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. [ from the unit ] 2 Press to access - / each adjust MENU Right side screen. surface INPUT Press the R button to return to previous menu screen. Press to return to next menu screen. To Signal screen for AV To Signal screen for To Signal screen for RGB To Signal screen for Digital (S Video) (see page 39-41) Component (see page 40, 41) (see page 40-42
Краткое содержание страницы № 18
ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: 4 : 3 Zoom 16 : 9 Panasonic Auto Just [from the unit] Note: When selecting an input slot that attaches BNC Dual Video Terminal Right side surface Board (TY-FB9BD), Panasonic Auto cannot be selected. ENTER/ The aspect mode changes each time the ENTER button is + / pressed. VOL [During MULTI PIP
Краткое содержание страницы № 19
Adjusting Pos. /Size 1 Press to display the Pos. /Size menu. Press to select Auto Setup / H-Pos / H-Size / V-Pos / 2 V-Size / Dot Clock / Clock Phase / 1:1 Pixel Mode. Press to adjust Pos. / Size. 3 During “Video (S Video)”, “Digital”, “SDI” and “HDMI” input signal. Pos. /Size Normal Normalise Auto Setup H-Pos 0 H-Size 0 V-Pos 0 0 V-Size 4 Press to exit from adjust mode. 1:1 Pixel Mode Off Notes: During “Component”, “RGB” and • Unadjustable items are grayed out. “PC” input signal. Adjustable
Краткое содержание страницы № 20
Adjusting Pos. /Size Auto Setup Automatically adjust H-Pos / V-Pos / Clock Phase / Dot Clock and set H-Size / V-Size the standard value when RGB signal is input. Notes: • If the dot clock frequency is 162 MHz or higher, Dot Clock cannot be made. • If the image is that the edge is hardly fi gured out or shadowy, that cannot be adjusted automatically. In such case, press Auto Setup again after changing the image to the clearer one. • When DVI-D is input, Clock Phase cannot be adjusted automatic
