Краткое содержание страницы № 1
OWNER'S MANUAL
PURE FLAT AV STEREO TELEVISION
68CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 6820PF
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4166
Standards Australia
APP No: N15899
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
Краткое содержание страницы № 2
Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents INTRODUCTION Features ...................................................1 NOTES FOR OPERATION
Краткое содержание страницы № 3
INTRODUCTION Features . Hyperband . English/Chinese on-screen menu display . 256 preset channels 2 . Intellectualized I C-bus control . Full function remote control . ON Timer, OFF Timer . Four picture modes' setting . AUDIO/VIDEO input & output terminals . S-VIDEO Terminal . Program scan function . Games calendar function . Advanced digital picture improvement circuit . Digital AFT technology . Channel reservation 1
Краткое содержание страницы № 4
NOTES FOR OPERATION Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please * turn off the power supply and remove the power plug. When it is to be left unattended for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. * Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted on the TV set. Cautions for safety Note: This TV set ca
Краткое содержание страницы № 5
Installation Antenna Connection To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied) When using the coaxial cable (not supplied) (75 ) for UHF/VHF aerial, connect the plug into the 75 ohm aerial socket directly. Note: When you connect the outdoor aerial cable to the aer
Краткое содержание страницы № 6
Appearance Front view Note: Functions of MENU, TV/AV, VOLUME+/-, CH are also provided to the remote controller. Back View 4
Краткое содержание страницы № 7
Appearance Remote Controller 5
Краткое содержание страницы № 8
Menu Introduction Introducing the menu You can use the on-screen menus to set the picture quality and other settings. You can use buttons on both the remote controller and the TV to operate the menus. Notes: To select each item, use the or button. Normal Screen To adjust or set each item, use the or button Press MENU button COLOR 76 BRIGHT 75 CONT 100 SHARP 50 SELECT: SET: Press MENU button POSITION 008 BAND VHFL SKIP OFF SEARCH MFT AUTO MEMORY Press MENU button LANGUAGE ENG/ C.SYS
Краткое содержание страницы № 9
OPERATION Turning the Power On/Off . The following describes how to turn the TV on/off using the TV's main switch and the remote controller. To turn the power on/off 1. Press the POWER switch, the red power indicator lights up. 2. Press the button or any one of 0~9 number buttons on the remote controller to turn the set on and the green indicator lights up. Without using the remote controller, you can directly press VOL or CH or TV/AV button on the set to turn on the TV. *Note: If
Краткое содержание страницы № 10
OPERATION Tuning in There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. To preset channels (Auto search) Use the AUTO SEARCH function to preset all the active channels in your local area automatically. To enter into menu Press the MENU button repeatedly to select and highlight the icon, and the PRESET menu POSITION 008 BAND VHFL appears on the screen automatical
Краткое содержание страницы № 11
OPERATION Tuning in (continued) Use the MANUAL SEARCH function if desired channels can not be preset with the AUTO SEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions. To preset channels (Manual search) Manual search If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel n
Краткое содержание страницы № 12
OPERATION Tuning in (continued) To skip unnecessary position numbers and MFT (Manual Fine Tuning) To skip a position number After presetting the channel you can skip unnecessary position numbers so that only the channels you want to watch are selected. 1. Enter into the (PRESET) menu, press the POSITION 008 or button to select POSITION , then select BAND VHFL SKIP OFF the unwanted program number with the or SEARCH button. MFT AUTO MEMORY lllllllllllll llllllllllllllllll
Краткое содержание страницы № 13
OPERATION Tuning in (continued) The setting of colour system Note: In factory the TV set's colour system has been preset to AUTO, if you want to change the system, please do the following adjustments. [SYSTEM] 1. Press the SYS button, the colour and sound COLOR AUTO system will be displayed on the screen. SOUND BG SELECT ADJUST If the colour is abnormal, press the or 2. [SYSTEM] button to select COLOR, then press the or COLOR AUTO button to select the proper colour system.
Краткое содержание страницы № 14
OPERATION Channel selection You can watch TV programmes being broadcast on the preset channels. To watch a TV programme You can select your desired TV program by one of the following methods. Using the direct select buttons To select a one-digit position number (0~9) METHOD 1:Press the button and the screen displays "X- -", wait for 2 After 2 X-- seconds seconds and the channel is selected. METHOD 2: Press 0 button and the screen displays "0- -", then press 0 button X again, the screen displays
Краткое содержание страницы № 15
OPERATION Convenient Picture Controls Selectable picture To select the picture mode You can select the picture quality instantly among three preset modes and one user-set mode. Press the P.S button to select the desired picture quality. BRILLIANT, NATURAL, MELLOW and PERSONAL BRILLIANT (user-set) can be selected cyclically. NATURAL MELLOW PERSONAL To set the desired picture quality to the PRESONAL position 1. Press the MENU button to display the (PICTURE) menu. Or press the P.M button, to call
Краткое содержание страницы № 16
OPERATION Convenient Sound Controls and Sleep timer Adjusting the volume and muting the sound To adjust the volume Adjust the volume with the VOL buttons. Press the VOL button to decrease the sound. Press the VOL button to increase the sound. To mute the sound The muting function is convenient when you need to pay attention to surrounding sounds, answer a phone call, receive a visitor, etc. 1. Press the MUTE button to mute the sound. MUTE 2. To restore the sound, press the MUT
Краткое содержание страницы № 17
OPERATION System setting SYSTEM SET Press the MENU button repeatedly to select and highlight the icon, and the SYSTEM SET menu appears on the screen automatically. LANGUAGE ENG/ C.SYSTEM AUTO S.SYSTEM BG B.B.SET ON SELECT ADJUST To select the language for the OSD Making use of this function can switch the language for the OSD to either English or Chinese. In the (SYSTEM SET) menu, press the or LANGUAGE ENG/ button to select LANGUAGE. Press the or C.SYSTEM AUTO S.S
Краткое содержание страницы № 18
OPERATION Special functions CALENDAR function(1800-2200) Enter into the (SPECIAL FUNCTION) CALENDAR menu, press the or button to select GAME1 CALENDAR, press the or button to GAME2 enter into calendar interface. In the calendar interface pressing the or SELECT ADJUST button can switch among the year, month and the date while pressing the or button can JULY 18 2007 increment or decrement them. SU MO TU WE TH FR SA To exit the calendar interface, press a
Краткое содержание страницы № 19
OPERATION Special functions Playing games To play GAME2 (Falling Cube) Enter into the (SPECIAL FUNCTION) CALENDAR GAME1 menu, press the or button to select GAME2 GAME2 item, press the or button to enter GAME2 interface. SELECT ADJUST Press any one of , , , buttons to start the game. on the screen, there are falling cubes, pressing button can change the cubes shape, pressing , buttons can move the cubes leftward or rightwar
Краткое содержание страницы № 20
OPERATION CLOCK SETTING CLOCK SET Press the MENU button repeatedly to select and highlight the icon, and the CLOCK SET menu appears on the screen automatically. NOW TIME setting Making use of this function can set the current time for the TV. In the (CLOCK SET) menu, press the or 18:30:18 NOW TIME button to select NOW TIME. Press the or OFF ON TIME OFF OFF TIME button to set the current time -- ON CHANNEL 0M TIME ADJ SELECT ADJUST ON TIME setting Making use of thi
