Краткое содержание страницы № 1
OWNER'S MANUAL
76CM WIDE SCREEN HDTV READY
MODEL: 76WSHD
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4166
Standards Australia
APP No: N18748
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Краткое содержание страницы № 2
Congratulations on your purchase of Palsonic's HDTV ready. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this equipment. Contents Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. 1 1. Cautions for safety ...........................................................................................
Краткое содержание страницы № 3
21 9.1.3 Making use of DYNAMIC button ....................................................................... 9.1.4 Making use of P.SCAN button .......................................................................... 21 9.1.5 Making use of STILL button .............................................................................. 21 9.1.6 Making use of PHOTO button .......................................................................... 21 9.1.7 Making use of PANORAMA button ...........
Краткое содержание страницы № 4
1. Cautions for safety Note: This set can be operated on an AC power of 240V, 50Hz. You must not use ! a power supply of any other type. When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose the TV set to rain or excessive moisture. Avoid using the set in very warm or damp places and never use it in a bathroom. When cleaning dust off the picture tube disconnect the po
Краткое содержание страницы № 5
High voltage exists in this TV set. Do not remove the cover. Do not cover the ventilating hole in the cabinet Keep a space of more than 5 cm from the walls to the TV set to ensure adequate ventilation. If the power cord or the plug is damaged contact a qualified service department for service. When the TV set is to be left unattended for a long period of time, turn off the power supply and remove the plug from the wall outlet. Don’t try to push anything into the cabinet or place any vessel with
Краткое содержание страницы № 6
2. Location of controls 2.1 FRONT VIEW REMOTE SENSOR INDICATOR INDICATOR POWER SWITCH 1 TV/AV 2.2 SIDE VIEW 2 CH- 3 CH+ 4 MENU 5 VOL- VOL+ 6 1. TV/AV button: Open the signal source selection menu. 2. CH- button: Select a lower position number. 3. CH+ button: Select a higher position number. 4. MENU button: Enter into the menu. 5. VOL- button: Lower the volume 6. VOL+ button: raise the volume. : Headphone jack AV3 input terminals {S-VIDEO, VIDEO, AUDIO L/MONO, R}
Краткое содержание страницы № 7
2.3 Back View 3 4 2 5 1 6 1. Antenna input 2. DVD input terminals { VIDEO: Y, C , C , AUDIO: L/MONO, R} B R 3. AV1 input terminals { S-VIDEO, VIDEO, AUDIO: L/MONO, R} 4. AV2 input terminals { S-VIDEO, VIDEO, AUDIO: L/MONO, R} 5. AV output terminals {VIDEO, AUDIO: L/MONO, R} 6. HDTV input {Y, P , P , XGA, AUDIO: L/MONO, R} B R
Краткое содержание страницы № 8
2.4 Remote Controller Button function: 1. Power on/standby 2. Scan mode selection 3. To caption moving into 4 successive frozen frames 4. STATIC/MOVING picture mode selection 5. Still the current picture 6. Channel preview 7. Channel up/down In menu operation used to move the cursor upward or downward. 8. Text /image mode switch over 9. Retain on-screen display 10. Sleep timer 11. Surround sound control 12. NICAM/FORCE FM sound decoder selection 13. Play game 14. Selectable picture 15. Open the
Краткое содержание страницы № 9
3. Installation 3.1 Antenna Connection To ensure a bright-coloured and clear picture use an outdoor antenna or CATV cable. Note: ! In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied). When using the coaxial cable (not supplied) (75 ) for UHF/VHF aerial, connect the plug into the 75 ohm aerial socket directly. Note: ! 1. When you connect the outdoor antenna cable to the antenna terminal on the set, turn off the power supply to th
Краткое содержание страницы № 10
0 30 3.2 Battery installation 2 3 1 Replace the battery Install two "AAA" Open the battery compartment cover. batteries paying compartment attention to the cover. polarity diagram in the battery compartment. BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to
Краткое содержание страницы № 11
(Please refer to the owner's manual of the 3.4 External Equipment connections equipment to be connected as well.) 3.4.1 To connect AV input terminals You can connect video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound. If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal (special S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (phono type). Video camera, etc. To video output To audi
Краткое содержание страницы № 12
3.4.2 To connect DVD input terminals The figure below shows how to connect the DVD input terminals of the TV set to the DVD Player, Laser Disk Player, etc. DVD Player, THE SET'S REAR Direction of the signal Laser Disk Player etc. White (audio L/MONO) Red (audio R, CR) Green (Y) Blue (CB) COMPONENT AUDIO VIDEO OUTPUT OUTPUT Press AV/TV button to display the signal source selection menu and select YCbCr mode. The picture shown on the screen is the program from the DVD Player. Note: Both the compon
Краткое содержание страницы № 13
3.4.4 To connect XGA input interface The figure below shows how to connect the set to the computer through XGA interface. THE SET'S REAR COMPUTER Direction of signal White (audio L/MONO) Red (audio R) Signals Press AV/TV button to display the signal source selection menu and select HDTV-XGA mode. At this time the screen will display information from the computer. 3.4.5 To connect HDTV set top box If your HDTV set top box is incorporated with YPbPr terminals, connect the set top box to the TV se
Краткое содержание страницы № 14
4. Switching on/off 1) Press the main POWER SWITCH (1) the (2) red power indicator lights up, the set is in standby mode. 2) Press the POWER button (2) on the remote controller to turn on the set, and the power indicator turns to yellow. Or you can directly press CH+ / CH- button on the set to turn on the set. 3) To turn off the set completely, press the main POWER SWITCH (1). (1) 4) To turn off the set temporarily, press the POWER button (2) the set is in standby mode, the indicator turns to re
Краткое содержание страницы № 15
Press VOL button Press VOL button Press MENU button Joins page 12A Enhanced 6. Brief menu operation and introduction Press CH button or MENU button Press CH button Press C Press CH button Press CH button or MENU button Note: In menu operation, pressing MENU button or waiting ! for 15 seconds can exit the menu. For more details refer to the following pages. Joins page 12A Press VOL button Press VOL button Press CH button or MENU button Press CH bu
Краткое содержание страницы № 16
Press VOL button Press VOL button Joins page 12 TV Operation (RF mode) The icon is selected Cursor The PICTURE menu includes the following items: Contrast, Bright, Colour, Peaking ,Tint Matrix, CTI, COMB, DNR, SVM Hints Press CH button or MENU button The SOUND menu Press CH button includes the following items: Bass, Treble, Balance Surround sound, Loudness. The TIMER menu includes Press VOL button the following items: TIMER OFF, TIMER ON, TIMER Press VOL butto
Краткое содержание страницы № 17
7. Channel Presetting If you have preset the channels, you can directly watch TV programs after turning on the set. If not, then preset channels in one of the following ways. 7.1 AUTO TUNE Method 1: 1) Press MENU button (1) to enter into the main menu. 2) Press VOL or VOL button (2) to select PRESET menu, press CH button (3) to select and highlight AUTO TUNE. 3) Press VOL or VOL button (2) to start the auto tune. All active channels will be searched or stored into the memory aut
Краткое содержание страницы № 18
7.2 Manual search Method 2: If auto tune can not preset the desired (4) channels, or you want to preset the desired (3) (1) channels one by one with the preferred 2 (2 ) (2 ) 1 channel number, please make use of (3) SEARCH. 1) Use number buttons (4) or CH button (3) to select a channel number. 2) Enter into the PRESET menu, press CH button (3) to select SEARCH. 3) Press VOL button (2 ) to search channels from current channel to lower channel, press 1 2 VOL button (2 ) to search
Краткое содержание страницы № 19
7.3 To skip unnecessary position numbers After presetting the channels, you can skip unnecessary position numbers so that only the channels you want to watch are (4) selected with CH or CH button. (3) (1) 1) Press the number button (4) or CH (2) (2) button (3) to select a channel number (3) you want to skip. 2) Enter into the PRESET menu, press CH button (3) to select SKIP. 3) Press VOL button (2) to select SKIP (ON). Thus, when you select channels with CH butto
Краткое содержание страницы № 20
7.4.2 FINE TUNE 1) Press the number buttons (4) or (4) CH button (3) to select the (3) (1) channel you want to fine-tune. (2) (2) 2) Enter into the PRESET menu, (3) press CH button (3) to select Fine tune, then press and hold the VOL or VOL button (2) to begin fine-tune until the optimum picture and sound is achieved. Note: if some channel’s colour or sound is abnormal, it may be that the setting of the colour or the ! sound system is wrong, please do adjustment according
