Краткое содержание страницы № 1
OWNER'S MANUAL
CIWP4206 A
CIWP4206
42 INCH
ANALOG / DIGITAL
PLASMA DISPLAY TV
TO RECEIVE DIGITAL/ANALOG SIGNAL,YOU MUST CONNECT ANTENNA.
HIGH-DEFINITION TELEVISION
By changing the screen display mode from time to time,
you can reduce burn-in on screen.
(Refer to “CHANGING THE SCREEN DISPLAY MODE” on page 21.)
IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER
READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-474-0045,
OR VISIT OUR WEB SITE AT http://www.funai-corp.com
Краткое содержание страницы № 2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI- ANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT DANGER- CAUTION OUS VOLTAGE CONSTITUTING A RISK OF RISK OF ELECTRIC SHOCK ELECTRIC SHOCK IS PRESENT WITHIN DO NOT OPEN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELEC- THIS SYMBOL INDICATES THAT THERE TRIC SHOCK, DO NOT REMOVE COVER (OR BACK). ARE IMPORTANT OPERATING AND MAIN- NO USER SERVICEABLE PARTS INSIDE. REFER TENANCE INSTRUCTIONS IN THE LITERA- SERVICING TO
Краткое содержание страницы № 3
PRECAUTIONS • Place your TV in a room with adequate ventilation. • Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight. • Do not place your TV on soft surfaces, such as rugs or blankets. • Leave enough room for air to circulate around the bottom, top and back of the set. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly ap
Краткое содержание страницы № 4
SUPPLIED ACCESSORIES • Owner’s Manual • Quick Set Up • Power Cable (1EMN22014A) (1EMN22015A) (WBC0192LW001) • Remote control unit • Batteries (NF009UD) (“AA” x 2) • If you need to replace these accessories, please refer to the PART NO. with the illustrations and call our toll free customer support line found on the cover of this manual. • Depending on your antenna system, you may need different types of Combiners (Mixers) or Separator (Splitters). Contact your local electronics store for these i
Краткое содержание страницы № 5
ONTENTS C IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FEATURES . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 6
UNCTIONS F REMOTE CONTROL, CONTROL AND REAR PANEL FUNCTION INPUT SELECT button (p20) SLEEP button (p23) Press to access connected external Press to activate the sleep timer. devices like a DVD recorder or VCR. INPUT POWER SLEEP SELECT POWER button (p13) AUDIO button (p19) Press to turn the TV on and off. Cycles through audio options. 1 2 3 • Analog mode (TV) Number buttons (p18) Selects audio mode. Press to select a channel. 4 5 6 • Digital mode (DTV) AUDIO SETUP button (p23) Selects audio langu
Краткое содержание страницы № 7
ANT. IN jack AUDIO OUT jacks Coaxial cable connection for your Audio cable connection for external antenna or cable box. audio equipment. Use AUDIO IN jacks from underneath of external equipment. HDMI ANT. IN DIGITAL AUDIO OUT AUDIO OUT AUDIO HDMI IN jack (COAXIAL) jack L L HDMI cable connection for external Digital audio coaxial DIGITAL HDMI IN AUDIO OUT R R video equipment (i.e.DVD recorder). cable connection for (COAXIAL) decoder or audio AUDIO jacks (for DVI con- receiver. Connect by side R
Краткое содержание страницы № 8
REPARATION FOR USE P CONNECTION This section describes how to connect your TV to an antenna, cable box, etc. MAKE SURE YOU HAVE AN ANTENNA. As DTV is only available over the air, you need an antenna to receive a digital signal. NOTE: • Be sure your antenna or other source is connected properly before plugging in the power cord. [ANTENNA CABLE CONNECTION] 1) When connecting your TV to an antenna Connect the Coaxial cable on your home outlet to the ANT. IN jack of this TV. 2) When connecting TV to
Краткое содержание страницы № 9
CONNECTING OTHER DEVICES [HDMI] 1) High Definition Multimedia Interface (HDMI) uses the latest technology to ensure the signal maintains the highest degree of integrity from source to TV. Both video and audio travel through a single cable. HDMI cable (not included) To HDMI IN jack HDMI ANT. IN HDMI OUT AUDIO OUT AUDIO L L To HDMI output jack DIGITAL HDMI IN AUDIO OUT R R DVD Player with the HDMI output jack (COAXIAL) Rear of this TV NOTES: • This TV accepts 480i / 480p / 720p / 1080i video sign
Краткое содержание страницы № 10
[COMPONENT CABLE CONNECTION] Offers better picture quality for video devices connected to your TV. Use a component video cable (not included) to connect your TV to external video devices equipped with component video jacks. If you connect to your TV’s COMPONENT1 input jack, connect audio cables to the AUDIO L/R jacks of COM- PONENT1. If you connect to your TV’s COMPONENT2 input jack, connect audio cables to the AUDIO L/R jacks of COM- PONENT2. Component video cable (not included) To component vi
Краткое содержание страницы № 11
[VIDEO CONNECTION] Offers standard picture quality for video devices connected to your TV. When the audio jack of the video device is monaural, connect the audio cable to the audio L input jack. Side of this TV To AUDIO input jacks R AUDIO L VIDEO2 To VIDEO2 input jack S-VIDEO2 Video cable (not included) To VIDEO1 input jack To video output jack COMPONENT2 COMPONENT1 Y Y VIDEO1 AUDIO VIDEO OUT OUT L L L Pb Pb Camcorder Video Game AUDIO AUDIO AUDIO R Pr R Pr R S-VIDEO1 To audio output jacks To
Краткое содержание страницы № 12
[ANALOG AUDIO CONNECTION] If you connect this TV to an external analog audio device, you can enjoy stereophonic (2 channel) audio sound. Required audio cable not included. HDMI ANT. IN To audio input jacks AUDIO OUT AUDIO AUDIO L L IN DIGITAL HDMI IN AUDIO OUT R R (COAXIAL) Stereo system Rear of this TV To AUDIO Audio cable OUT jacks (not included) CONNECTING THE POWER CABLE Connect the power cord (included) to the TV before connecting it to the power source. ANT. IN HDMI COMPONENT2 Y COMPONENT1
Краткое содержание страницы № 13
NITIAL SETTINGS I K L 4 Select source of ANT. IN jack using [ / ], press INITIAL SETUP [ENTER]. This section will guide you through your TV’s initial Initial Setup Initial Setup set up which includes selecting a language for your Make sure the antenna is connected to "ANT IN" jack. Air Select the destination of "ANT IN" jack. Cable on-screen menu and AUTOSCAN, which automati- Air cally scans and memorizes viewable channels. Cable Or ANT IN INPUT POWER POWER SLEEP SELECT BACK SETUP ENTER Select
Краткое содержание страницы № 14
HANNEL SETTINGS C K L 3 For TV channels, using [ / ], select “Air”. AUTOSCAN For CATV channels, select “Cable”. Autoscan Autoscan With AUTOSCAN, your TV automatically scans and Back Autoscan will rescan all channels. memorizes your area’s viewable channels. Activate This may take a while to complete. Air Select the destination of "ANT IN" jack. Cable AUTOSCAN when you turn on your TV for the first Cable Air 1hour time, change broadcast sources (e.g. from antenna Cable Or to CATV), or move your T
Краткое содержание страницы № 15
CHANNEL LIST MANUAL REGISTER This function lets you remove undesired channels This function lets you manually add channels not from the Channel Registration List. memorized due to poor broadcast strength during STILL AUTOSCAN. - 0 SCREEN SETUP SETUP MODE 1 1 2 2 3 3 4 4 5 5 6 6 AUDIO ENTER ENTER 7 7 8 8 9 9 INFO BACK STILL - - 0 0 SCREEN CH RETURN SETUP SETUP MODE 1 Display the setup screen. ENTER ENTER BACK INFO • Press [SETUP]. The following setup screen appears. 1 Display the setup screen. •
Краткое содержание страницы № 16
• If the channel is set to external input, you can- ANTENNA CONFIRMATION not confirm the antenna situation. Displays signal strength for each channel. Video1 Antenna Antenna INPUT POWER SLEEP SELECT Back Indicator is available 1 1 2 2 3 3 for antenna signal only. 4 4 5 5 6 6 AUDIO CH Ch Change 7 7 8 8 9 9 STILL - - 0 0 SCREEN SETUP SETUP MODE 3 To exit the setup, press [SETUP]. ENTER ENTER INFO BACK CH RETURN VOL. CH CH MUTE 1 Display the setup screen. • Press [SETUP]. The following setup scree
Краткое содержание страницы № 17
LANGUAGE SELECTION SETTING THE PANEL SAVER You can choose English, Spanish, or French as Panel saver prevents the display from being etched your on screen language. by an unchanging image. You can specify a setting STILL for it. - 0 STILL SCREEN SETUP SETUP MODE - 0 SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK ENTER ENTER INFO BACK CH RETURN CH RETURN VOL. CH MUTE VOL. CH MUTE 1 Display the setup screen. 1 Display the setup screen. • Press [SETUP]. The following setup screen appears. • Press [S
Краткое содержание страницы № 18
ATCHING TV W NTSC ATSC CHANNEL SELECTION 18:00 CH4-1 No signal No signal Select channels by pressing [CH K/L] found on 18:30 remote control or on the TV’s control panel, or by CH4-1 CH4-2 CH4-3 pressing [the Number buttons] found on the remote CH4 19:00 control. CH4-1 No signal CH4-3 INPUT POWER SLEEP SELECT 19:30 CH4-1 CH4-2 No signal 1 1 2 2 3 3 20:00 4 4 5 5 6 6 : change automatically AUDIO : change manually by pressing [CH / ] 7 7 8 8 9 9 STILL on your remote control - - 0 0 SCREEN S
Краткое содержание страницы № 19
Press [AUDIO] to cycle through available audio STILL MODE channels. You can freeze the image shown on the screen. When the broadcasting has all audio... 1 2 3 SAP / STEREO SAP / MONO 4 5 6 AUDIO SAP / STEREO 7 8 9 STILL STILL - 0 SCREEN SETUP When the broadcasting has stereo audio and MODE monaural audio... MONO / STEREO MONO / STEREO 1 Pause the image. When the broadcasting has SAP and monaural • When you press [STILL], the image shown on audio... the screen is paused. SAP / MONO SAP / MONO Sti
Краткое содержание страницы № 20
ACCESSING EXTERNAL DEVICES • When you press [INFO], the current external input mode, the type of resolutions for video Use your remote control to access DVD recorders, signal, TV aspect ratio, CC and TV rating will home audio systems and other external devices be displayed at the top-right of the screen. when they are connected to your television. • The information display will automatically dis- INPUT INPUT POWER SLEEP SELECT SELECT appear in 1 minute. 1 2 3 1) When using VIDEO1 or S-VIDEO1 inp
