Краткое содержание страницы № 1
Español Français English
EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.
LC320EMXF
Owner’s Manual
Guide d’utilisation
Manual del Usuario
HIGH-DEFINITION TELEVISION
TO RECEIVE DIGITAL/ANALOG SIGNAL,
YOU MUST CONNECT ANTENNA.
POUR RECEVOIR LE SIGNAL
NUMÉRIQUE /ANALOGIQUE, VOUS
DEVEZ CONNECTER L’ANTENNE.
PARA RECIBIR LA SEÑAL DIGITAL/
ANALÓGICA, DEBE CONECTAR LA
ANTENA.
MODEL NUMBER SERIAL NUMBER
© 2009 Funai Electric Co., Ltd.
NEED HE
Краткое содержание страницы № 2
The model and serial numbers of this unit may be found on the cabinet. LC320EMXF Model No.: You should record and retain those numbers for future reference. Serial No.: Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. The lightning flash with arrowhead symbol, within an CAUTION equi
Краткое содержание страницы № 3
Español Français English This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 3.2 inches (8cm) or more around this apparatus. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (battery pack or b
Краткое содержание страницы № 4
front side NTRODUCTION I Supplied Accessories owner’s manual quick start guide remote control registration card screw kit for attaching (1EMN25279) (1EMN25280) (NH000UD) (1EMN24701) the stand (1ESA19881) batteries (AAA x 2) • If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual. Attaching the Stand You must attach the stand to the unit to have it as a table top unit. Be sur
Краткое содержание страницы № 5
WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION PREPARATION Español Français English Features Contents Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 DTV/TV/CATV Trademark Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - You can use your remote control to select INTRODUCTION channels which are broadcast in digital format and Supplied Accessories . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 6
NTRODUCTION I Control Panel 1. y (power) (p. 13) Press to turn the unit on and off. K L 2. CH / (p. 14 / p. 15) K L Press to select channels or move up ( ) / down ( ) through the main menu items. 3. SETUP (p. 13) Press to display the main menu. X Y 4. VOL / (p. 14) X Press to adjust the volume or move right ( ) / left Y ( ) through the main menu items. 5. Infrared sensor window 5 Receives infrared rays transmitted from the remote 6 control. 7 6. POWER ON indicator Lights up green when powe
Краткое содержание страницы № 7
WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION PREPARATION Español Français English Remote Control Function X Y 7. VOL. / (p. 14) Press to adjust the volume. 9 8. Number buttons (p. 14) • Press to select channels. - 1 10 (hyphen) 2 • Press to shift the subchannel from the main channel. 9. POWER (p. 13) 3 11 Press to turn the unit on and off. 10. AUDIO (p. 15) 4 Digital mode (DTV) • Press to select the audio language. 5 12 Analog mode (TV) 6 13 • Press to selec
Краткое содержание страницы № 8
REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. Before you connect... Be sure your antenna or other device is connected properly before plugging in the AC power cord. Antenna Connection Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. rear of this unit e.g.) VHF / UHF antenna RF co
Краткое содержание страницы № 9
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Español Français English No supplied cables are used in this connection: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. External Device Connection [HDMI Connection] HDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high definition video and mul
Краткое содержание страницы № 10
REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [Component video Connection] RCA component video connection offers better picture quality for video devices connected to the unit. If you connect to the unit’s Component video Input jack, connect RCA audio cables to the Audio L/R jacks below the Component video connector. e.g.) RCA component video cable rear of this unit (green) (blue) (red) (green) (blue) (red) Y Pb/Cb Pr/Cr C
Краткое содержание страницы № 11
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Español Français English No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [Video Connection] RCA video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video connector. When the audio jack of the video device is monaural
Краткое содержание страницы № 12
REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [PC Connection] This unit can be connected to your PC that has a DVI terminal. Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug-RCA conversion cable as well. If you connect this unit to your PC, you can use this unit as a PC monitor. e.g.) stereo mini plug-RCA rear of this unit conversion cable T T To o o HDMI1 HDMI1 HDMI1 input jack only i
Краткое содержание страницы № 13
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Español Français English These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Initial Setup This section will guide you through the unit’s initial setting which includes Use [Cursor s / B] to select the desired location setting, 4 selecting a language for your on-screen menu and autoscan, which then press [ENTER]. automatically scans and memorizes viewable
Краткое содержание страницы № 14
ATCHING TV W Channel Selection Volume Adjustment K L Select channels by using [CH / ] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. K L • To select the memorized channels, use [CH / ] or [the Number buttons]. • To select the non-memorized channels, use X Y Use [VOL. / ] to adjust the audio volume. [the Number buttons]. To Use [the Number buttons] Volume 30 TV - When selecting ana
Краткое содержание страницы № 15
INTRODUCTION OPTIONAL SETTING TROUBLESHOOTING INFORMATION PREPARATION WATCHING TV Español Français English Still Mode Switching Audio Mode You can pause the image shown on the TV screen. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. TV Press [STILL] to pause the image shown on the TV Press [AUDIO] to display the currently selected screen. audio mode. While receiving an MTS broadcast, press repeatedly to cycle t
Краткое содержание страницы № 16
ATCHING TV W TV Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number and the audio mode are channel such as program title, program guides are displayed. displayed. Press [INFO] to display the details of the currently Press [INFO]. selected program. 11 SAP / STEREO 480i 480i SD SD 4:3 4:
Краткое содержание страницы № 17
INTRODUCTION OPTIONAL SETTING TROUBLESHOOTING INFORMATION PREPARATION WATCHING TV Español Français English TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. Press [SCREEN MODE ] repeatedly to switch the TV aspect ratio. For 16:9 video signal For 4:3 video signal Full Zoom Sidebar Full Expand Cinema Wide Cinema Full Sidebar Display a 16:9 pictu
Краткое содержание страницы № 18
PTIONAL SETTING O Main Menu Autoscan This section describes the overview of the main menu displayed when you If you switch wires (e.g., between antenna and CATV) or if you move the press [SETUP]. For more details, see the reference page for each item. unit to a different area after the initial setting, or if you restore the DTV The main menu consists of the function setting items below. channel you deleted, you will need to perform autoscan. Before you begin: Make sure the unit is connected
Краткое содержание страницы № 19
INTRODUCTION WATCHING TV TROUBLESHOOTING INFORMATION PREPARATION OPTIONAL SETTING Español Français English Channel List Manual Register The channels selected here can be skipped when selecting the channels This function lets you add the channels that were not added by K L using [CH / ]. the autoscan due to the receptible condition at the initial setting. Those channels can still be selected with [the Number buttons]. Press [SETUP] to display the main menu. Press [SETUP] to display the main m
Краткое содержание страницы № 20
PTIONAL SETTING O Antenna Confirmation Language Selection You can choose English, Spanish, or French as your on-screen language. DTV This function lets you check the digital signal strength of each channel. Press [SETUP] to display the main menu. Press [SETUP] to display the main menu. 1 1 Use [Cursor K/ L] to select “CHANNEL”, then press Use [Cursor K/ L] to select “LANGUAGE”, then press 2 2 [ENTER]. [ENTER]. Use [Cursor K/ L] to select “Antenna”, then press 3 Use [C
