Краткое содержание страницы № 1
4-099-415-11 (3)
LCD Color TV
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
Owner’s Record
The model and serial numbers are located at the rear of the TV, on the backside of
the rear cover, on the sticker, and also on the TV box (white label). Record these
numbers in the spaces provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. ________________
Serial No. _____________
Краткое содержание страницы № 2
NOTIFICATION WARNING This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits To reduce the risk of fire or shock hazard, are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate do not expose the TV to rain or moisture. radio frequency energy and, if not installed and used in accordance with the instructions, m
Краткое содержание страницы № 3
Important Safety Instructions Handling the LCD screen 1 Read these instructions. s Do not leave the LCD screen facing the sun as it can damage the LCD screen. Take care when you place the TV by a window. 2 Keep these instructions. s Do not push on or scratch the LCD screen. Do not place a heavy object 3 Heed all warnings. on the LCD screen. This may cause the screen to lose uniformity or cause LCD panel malfunctions. 4 Follow all instructions. s If the TV is used in a cold place, a smear may app
Краткое содержание страницы № 4
4
Краткое содержание страницы № 5
Table of Contents Table of Contents Using the Video Label Feature ....................... 29 Installing and Connecting the TV Operating Video Equipment with Your TV Unpacking .......................................................... 6 Remote Control .......................................... 30 Inserting Batteries into the Remote Control ... 6 Programming the remote control ............ 30 Connector Types ................................................ 6 Operating optional equipment ..........
Краткое содержание страницы № 6
Installing and Connecting the TV Installing and Connector Types Connecting the You may find it necessary to use some of the following connector types during set up. TV Supplied 75-ohm coaxial cable Screw-on type Screw into connection. Unpacking S VIDEO cable When you unpack this unit, make sure it includes the following: High quality video cable for enhanced picture quality Remote control (1) and AC power cord (1) size AA batteries (2) Align guides and push into connection. AUDIO/VIDEO cable Pus
Краткое содержание страницы № 7
Installing and Connecting the TV Identifying Front and Rear Connectors 3 VHF/UHF (pages 8, 12 - 14) TV front panel Connects to your VHF/UHF antenna or cable. 1 4 VIDEO 1 IN (pages 12 - 14, 17) I Connects to the output jacks of your VCR or other video equipment. 5 VIDEO 2 IN (page 12 - 14, 17) Connects to the output jacks of your VCR or other video equipment. 6 AC IN (page 9) Connects the supplied AC power cord. 7 AUDIO OUT (page 15) Connects to the input jacks of your audio equipment. 2 Audio ou
Краткое содержание страницы № 8
Installing and Connecting the TV Connecting directly to cable or an Basic Connections antenna (Connecting Cable TV or VHF only or VHF/UHF or cable an Antenna) 75-ohm coaxial Rear of TV cable (supplied) When connecting an antenna or cables, remove the VHF/UHF rear cover of the TV beforehand. Note It is strongly recommended to connect the antenna using a 75- Removing the rear cover ohm coaxial cable to get optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio noise and
Краткое содержание страницы № 9
Installing and Connecting the TV Connecting the Power Cord Complete other connections prior to connecting the power cord. 1 Connect the power cord to the AC IN connector of the TV. 2 Connect the other plug of the power cord to a wall outlet. Wall outlet For 120 V AC AC power cord (supplied) 9
Краткое содержание страницы № 10
Installing and Connecting the TV 3 Gather the cables from both sides together and Bundling cords and cables secure them with the clip at the bottom. You can organize the cables in the back of the TV. 1 Bundle the cables and secure them with the clips on both sides of the TV. Clip Note It may not be possible to fasten with clips if cables are too thick. Clips Note Note It may not be possible to fasten with clips if cables are too If the cables are not neatly stored in the grooves, you may not be
Краткое содержание страницы № 11
Installing and Connecting the TV Adjusting the viewing angle of the Carrying the TV TV When carrying the TV, hold it as shown in the diagram below. Do not hold only by the rear cover. You can adjust the angle to avoid the reflection of As the rear cover is designed to come off, doing so light and get a better view of the TV. may cause you to drop the TV, resulting in damage to the TV or cause injury. Note When adjusting the angle, steady the base of the stand with your hand to prevent the TV fro
Краткое содержание страницы № 12
Installing and Connecting the TV Connecting a VCR and Cable TV Use this hookup if: •You have cable TV that does not require a cable box. Disconnect all power sources before making any connections. 1 Connect the CATV cable to the VCR’s IN jack. 2 Using the supplied 75-ohm coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack. 3 Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks. Rear of TV 75-ohm coaxial 75-ohm coaxial
Краткое содержание страницы № 13
Installing and Connecting the TV Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks. 3 Connect the supplied 75-ohm coaxial cable from your cable or antenna to the TV’s VHF/UHF jack. Rear of TV 75-ohm coaxial cable (supplied) S VIDEO Satelli
Краткое содержание страницы № 14
Installing and Connecting the TV Connecting a Satellite Receiver with a VCR Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 Connect the CATV cable to the VCR’s VHF/UHF IN jack. 3 Using the supplied 75-ohm coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack. 4 Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO IN
Краткое содержание страницы № 15
Installing and Connecting the TV Connecting an Audio Receiver Disconnect all power sources before making any connections. Using an AUDIO cable, connect the TV’s AUDIO OUT jacks to the audio receiver’s AUDIO IN jacks. Rear of TV AUDIO-L (white) AUDIO-R (red) AUDIO cable (not supplied) Audio reciever Audio (Compact AV system input DAV-FC9, etc) When using your audio system speakers Set “Speaker” to “Off” in the (Audio) menu. The TV’s sound is not output from the AUDIO OUT jacks when the TV’s spea
Краткое содержание страницы № 16
Installing and Connecting the TV Connecting a DVD Player with Component Video Connectors This is the preferred hookup to use if: •Your DVD player has component (Y, B-Y, R-Y) jacks. Disconnect all power sources before making any connections. 1 Using a component video cable, connect the DVD player’s Y, B-Y and R-Y jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3 IN connections. Note This TV supports only the 480i and 480p signal format. If the TV receives a signal other than 480i or 480p
Краткое содержание страницы № 17
Installing and Connecting the TV Connecting a DVD Player with A/V Connectors Use this hookup if: •Your DVD player does not have component (Y, PB, PR) jacks. Tip If your DVD player has component video output connectors, for best picture quality, use the connection described on page 16. Disconnect all power sources before making any connections. 1 Using an AUDIO cable, connect the DVD player’s AUDIO OUT jacks to the TV’s AUDIO IN jacks. 2 Using an S VIDEO cable, connect the DVD player’s S VIDEO ja
Краткое содержание страницы № 18
Installing and Connecting the TV Connecting a Digital Satellite Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital Satellite Receiver’s Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3 IN connections. Note This TV supports only the 480i and 480p signal format. If the TV receives a signal other than 480i or 480p, “Non Supported Video Format” appears on the screen. 2 Using an AUDIO cable, connect the Digi
Краткое содержание страницы № 19
Installing and Connecting the TV Connecting a Digital TV Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital TV receiver’s Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3 IN connections. Note This TV supports only the 480i and 480p signal format. If the TV receives a signal other than 480i or 480p, “Non Supported Video Format” appears on the screen. 2 Using an AUDIO cable, connect the Digital TV receive
Краткое содержание страницы № 20
Installing and Connecting the TV Auto Program is set to scan cable TV channels by default. To watch UHF channels with an antenna, see Setting the Channels “To watch UHF channels with an antenna” below. After you finish connecting your TV, you can run Auto Program to set up your channels. The Auto To perform Auto Program again Program screen appears when you turn your TV on 1 Press MENU. for the first time after installing it. 2 Press V/v to select (Channel), then press To skip channels, see pag
