Краткое содержание страницы № 1
2-661-022-32(1)
LCD Multi
Function Display
MFM-HT205
© 2006 Sony Corporation
Краткое содержание страницы № 2
Owner’s Record NOTICE This notice is applicable for USA/Canada only. The model and serial numbers are located at the rear of the unit. If shipped to USA/Canada, install only a UL LISTED/CSA Record these numbers in the spaces provided below. Refer to them LABELLED power supply cord meeting the following whenever you call upon your dealer regarding this product. specifications: Model No. Serial No. SPECIFICATIONS Plug Type Nema-Plug 5-15p Cord
Краткое содержание страницы № 3
Table of Contents Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Setup 1: Use the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setup 2: Connect the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setup 3: Connec
Краткое содержание страницы № 4
Screen menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Setting “Zoom” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Automatic picture quality adjustment function (for PC 2 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Making further automatic adjustments to the picture quality for the current input signal (Auto Adjust) (for PC 2 only) . . . . . . . . . . 24 Adjusting the picture’s sharpness m
Краткое содержание страницы № 5
Do not push on or scratch the LCD screen. Do not place a heavy Precautions object on the LCD screen. This may cause the screen to lose uniformity or cause LCD panel malfunctions. Warning on power connections If the display is used in a cold place, a residual image may Use the supplied power cord. If you use a different power cord, appear on the screen. This is not a malfunction. The screen be sure that it is compatible with your local power supply. returns to normal as the temperature
Краткое содержание страницы № 6
For customers in the United States Rear of the LCD display This product contains mercury. Disposal of this product may be regulated if sold in the United States. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance qd (http://www.eiae.org). qs Installation on a wall or a mounting arm If you intend to install the display on a wall or a mounting arm, be sure to consult qualified personnel. A Remote control sensor Identifying parts
Краткое содержание страницы № 7
L Connector cover (page 9) O Security Lock Hole Remove this cover when you connect cables or cords. The security lock hole should be used with the Kensington Micro Saver Security System. M Screw positions of VESA compatible mounting arm Micro Saver Security System is a trademark of Kensington. or stand (page 9) Attach the VESA compatible mounting arm or stand. P PC 1 connectors 1 DVI-D input connector (digital RGB) for PC 1 Rear of the LCD display (page 10) This connector inputs digital RGB
Краткое содержание страницы № 8
VIDEO 1/2 (page 11): Remote control Press to select a signal input through the VIDEO 1 jacks (composite/S video) on the rear and the VIDEO 2 jacks (composite/S video) on the side of the display. 8 TV (page 15): Press to select the TV input. C Feature buttons 9 (Picture Mode) (page 36): MUTING DISPLAY SLEEP 1 Press repeatedly to step through the 1 0 Picture Mode. (Zoom) (page 23): PC1 PC2 COMPONENT VIDEO1/2 2 Press repeatedly to step through the TV “Zoom” settings. 3 (PIP/PAP) (page
Краткое содержание страницы № 9
Setup 2:Connect the cables Setup Before using your display, check that the following items are • Turn off the display, computer, and other equipment included in your carton: before connecting them. LCD display If you intend to connect: Remote control – A computer equipped with an HD15 output connector Size AAA batteries (2) (analog RGB) Power cord t See “Connecting a computer using the PC 2 HD15-HD15 video signal cable (analog RGB) connectors” (page 10). DVI-D video signal cable
Краткое содержание страницы № 10
x Connecting a computer using the PC 1 x Connecting a computer using the PC 2 connectors connectors If you intend to connect a computer equipped with a DVI If you intend to connect a computer equipped with an HD15 connector (digital RGB), follow the instructions below. connector (analog RGB), follow the instructions below. Using the supplied DVI-D video signal cable (digital Using the supplied HD15-HD15 video signal cable RGB) and the supplied audio cord, connect the (analog RGB) and the supp
Краткое содержание страницы № 11
x Connecting video equipment using the x Connecting video equipment using the COMPONENT jacks VIDEO 1/2 jacks If you intend to connect video equipment that has component If you intend to connect video equipment that has composite/S video output jacks, such as a DVD player, follow the instructions video output jacks, such as a VCR, follow the instructions below. below. Using a video signal cable (not supplied) and an audio Using a video signal cable (not supplied) and an audio cord (not suppli
Краткое содержание страницы № 12
For VIDEO 2 x Connecting an antenna side of the display If you intend to connect an antenna to receive the TV signal, S video follow the instructions below. Using the 75-ohm coaxial cable (supplied), connect an video (yellow) antenna to the display’s VHF/UHF jack. audio-L (white) audio-R (red) VCR to the VHF/UHF jack to an antenna video and audio cable (not supplied) 75-ohm coaxial cable (supplied) S video cable (not supplied) Note Note It is strongly recommended that you connect the antenna
Краткое содержание страницы № 13
Setup 3:Connect the power cord Setup 5:Turn on the display and other equipment 1 Connect the supplied power cord securely to the display’s AC IN connector. 1Press the 1 (power) switch on the front of the display. 2 Connect the other end securely to a power outlet. The 1 (power) indicator lights up in green. CH VOL lights in green 1 to AC IN 2 to the power outlet 2 Turn on the computer or other video equipment. power cord (supplied) 3 Press the button to select the desired input signal. US
Краткое содержание страницы № 14
If no picture appears on the screen Setup 6:Adjust the tilt • Check that the power cord and the video signal cable are properly connected. This display can be adjusted within the angles shown below. If “No Input Signal” appears on the screen: Grasp the sides of the LCD panel, then adjust the – The computer is in the power saving mode. Try pressing any screen angles. key on the keyboard or moving the mouse. – Check that the input signal setting is correct by pressing the approx. 20° button
Краткое содержание страницы № 15
Skipping unnecessary channels Watching the TV You can skip unnecessary channels when selecting channels using the CH +/– button. Setting the TV channels 1 Press the MENU button. To watch TV programs, you need to run “Auto Program” to set up your channels. 2Press theM/m buttons to select (Channel) and Perform the following “Auto Program” procedure before you press the OK button. watch TV programs for the first time. The “Channel” menu appears on the screen. For details on the use of the menu
Краткое содержание страницы № 16
Using other features Customizing Your Display You can also use the following TV features. Before making adjustments x Watching TV programs with closed captions Connect the display and equipment, then turn them on. For the best results, wait for at least 30 minutes before making Set “Caption Vision” in the “Option” menu to “On.” For details, adjustments. see “Setting “Caption Vision” (for TV/COMPONENT/VIDEO 1/ VIDEO 2 only)” on page 33. You can make numerous adjustments to your display using t
Краткое содержание страницы № 17
4 Adjust the item. 3 Select the item you want to adjust. Press the M/m buttons to make the adjustment, then press the Press the M/m buttons to select the item you want to adjust, OK button. then press the OK button. When you press the OK button, the setting is stored, then the display returns to the previous menu. OK OK , , If is one of the menu items. When you select and press the OK button, the display returns to 5 Close the menu. the previous menu. Press the MENU button once to return
Краткое содержание страницы № 18
x Selecting the Picture Mode for TV/ Picture menu COMPONENT/VIDEO 1/VIDEO 2 You can select the appropriate screen brightness for your purpose. You can adjust the following items using the “Picture” menu. Mode Picture DVI-D: PC 1 1 Press the MENU button. Backlight Mode: Movie The main menu appears on the screen. Backlight: 100 Contrast (Picture) Contrast: 70 Brightness: 50 Brightness Color: 2 Press the M/m buttons to select (Picture) and Hue: Sharpness: Color Col
Краткое содержание страницы № 19
x Adjusting “Backlight” x Adjusting “Color” (for TV/COMPONENT/ If the screen is too bright, adjust the backlight to make the screen VIDEO 1/VIDEO 2 only) easier to see. You can change the color intensity of the picture displayed. 1 Press the MENU button. 1 Press the MENU button. The main menu appears on the screen. The main menu appears on the screen. 2 Press the M/m buttons to select (Picture) and 2Press the M/m buttons to select (Picture) and press the OK button. press the OK button. The “
Краткое содержание страницы № 20
4 Press the M/m buttons to select “Adjust” and press x Adjusting “Color Temp.” (for PC 1/PC 2 the OK button. only) The fine tuning menu for color temperature appears on the You can select the picture’s color level for the white color field screen. from the default color temperature settings. Also, if necessary, you can fine tune the color temperature. R 160 1 Press the MENU button. G 128 B 75 The main menu appears on the screen. 2Press the M/m buttons to select (Picture) and 5 Press the
