Руководство по эксплуатации Kodak 2302

Краткое содержание страницы № 1

TECHNICAL INFORMATION DATA SHEET




TI2497 Issued 11-99
Copyright, Eastman Kodak Company, 1999
KODAK Black- and- White Print Film 2302 / ESTAR Base
1) Description
KODAK Black-and-White Print Film 2302 / ESTAR Base is a low speed, high-resolution print film. This blue-
sensitive black-and-white film is designed for general release printing. It is also useful for making both positive and
negative titles and RGB separations from electron beam recorders. 2302 is coated on a propri

Краткое содержание страницы № 2

Data Sheet—2 Copyright, Eastman Kodak Company, 1999 TI2497 Issued 11-99 SO-302 sensitometry (characteristic curve) is different than 5302/SO-434. The gamma is slightly lower resulting from an efficient anti-halation layer which reduces light scatter. This antihalation layer is located under the emulsion layers, using a patented solid particle dye that decolorizes and is removed during processing. This dye offers superior protection against halation (exposure by light reflected back from

Краткое содержание страницы № 3

Data Sheet—3 Copyright, Eastman Kodak Company, 1999 TI2497 Issued 11-99 Notice: Observe precautionary information on product labels and on the Material Safety Data Sheets. Processing Step Temperatu Time Replenishment re Rate (mL per 100 ft) 35 mm [2] KODAK Developer D- 70°F (21°C) — 650 [1] 97 (D-97R) [3] Stop Rinse 70°F (21°C) 50 12,000 sec KODAK Fixing Bath 70°F (21°C) 6 min 600 [1] F-5 Wash (counter- 70°F (21°C) 10 12,000 current) min [4] Dry 95 °F(35 C) — [1]

Краткое содержание страницы № 4

Data Sheet—4 Copyright, Eastman Kodak Company, 1999 TI2497 Issued 11-99 prone to "static cling" when processed with Staticide process additive. Other similar quaternary ammonium compounds may also be effective as final rinse anti-static additives, but have not been certified for use in the D97 Process. Staticide 3000G is available from ACL Staticide, 1960 East Devon Avenue, Elk Grove Village, Illinois 60007, USA (Telephone: 847-981-9212, Fax: 847-981-9278), who can supply the chemical thr

Краткое содержание страницы № 5

Data Sheet—5 Copyright, Eastman Kodak Company, 1999 TI2497 Issued 11-99 For more information about medium- and extended-term storage, see ANSI/PIMA IT9.11-1998, SMPTE RP131-1998, and KODAK Publications No. H-1, "KODAK Motion Picture Film", and No. H-23, "The Book of Film Care". 11) Image Structure The modulation-transfer curves and the diffuse rms granularity data were generated from samples of SO-302 Film exposed with tungsten light and processed as recommended in KODAK Developer D-97

Краткое содержание страницы № 6

Data Sheet—6 Copyright, Eastman Kodak Company, 1999 TI2497 Issued 11-99 14) Available Roll Lengths For information on available roll lengths and formats of KODAK Black-and-White Print Film SO-302 / ESTAR Base contact your Kodak Professional Motion Imaging sales representative. For prints released with SDDS, please specify on your order NO edge code (print). 1 15) Graphs Data for each of the following characteristics was obtained for film processed in Process D97: MTF A) (11-99)

Краткое содержание страницы № 7

Data Sheet—7 Copyright, Eastman Kodak Company, 1999 TI2497 Issued 11-99 Net Fog F) KODAK Developer D-97 (AA) at 70°F (10-99) The minimum density or smallest amount of density a film has is known as the D-min; it is the density of the clear ESTAR base plus a little bit of "fog" in the emulsion. In the graph identified as TI2497F, "NET FOG" is defined as D-min minus base density. The graph shows emulsion "fog" in density versus increasing development times through the ascorbic acid (AA)