Краткое содержание страницы № 1
TM
MultiPASS C50
GETTING STARTED
I. Installation Guide
The following pages have been copied from the MultiPASS C50 User
Documentation to get you started. Please use these manuals for full
details.
Unpacking and Assembling the MultiPASS C50 ......................................... I-2
Connecting the MultiPASS C50 to your PC ................................................. I-6
Connecting the Telephone Line ..................................................................... I-6
Connecting the P
Краткое содержание страницы № 2
Unpacking Your MultiPASS C50 (2-5) Follow the directions below to unpack your MultiPASS C50 properly, and to make sure you have all of its components and documentation. 1. Carefully remove all items from the box. You should have someone help by holding the box while you lift the MultiPASS C50 and its protective packaging out of the carton. PARALLEL CABLE TELEPHONE LINE FERRITE CORE POWER CORD BC-20 BLACK BJ CARTRIDGE MultiPASS C50 USER’S GUIDE DOCUMENT MULTIPASS DESKTOP MANAGER FOR SUPPORT FOR W
Краткое содержание страницы № 3
Removing Shipping Materials (2-8) 1. Remove all pieces of shipping tape from the outside of the MultiPASS C50. 2. Remove the shipping tape and protective cardboard from the sheet feeder. 3. Open the operation panel by grasping it with both hands and gently pulling it toward you. 4. Remove the soft styrofoam sheet from the unit’s Automatic Document Feeder (ADF), then gently push the operation panel shut until it clicks. The numbers in parentheses indicate the pages in the MultiPASS C50 User’s Gui
Краткое содержание страницы № 4
Attaching the Sending Document Support (2-11) To install this support, insert one of its tabs into the corresponding slot above the MultiPASS C50’s Automatic Document Feeder (ADF), then – firmly but gently – insert the other. Attaching the Document Support (2-12) The ends of the metal support fit into the slots on the front of the MultiPASS C50, as shown below. To install it, slightly squeeze the ends of the support toward each other, insert them in the slots, and gently release them. Then slide t
Краткое содержание страницы № 5
Attaching the Output Tray Extension (2-13) The ends of the metal support fit into the slots on the output tray, as shown below. To install it, squeeze the ends of the support toward each other, insert them into the slots, and gently release them. Attaching the Local Language Labels Fit the faceplate in the right position. FUNCTION CARTRIDGE RESUME /PAUSE RECEIVE MODE RESOLUTION ALARM CODED DIAL 1 2 3 PRINTER RESET 4 5 6 TONE/+ D.T. R Peel the protective sheet from the self-adhesive label, careful
Краткое содержание страницы № 6
Connecting the MultiPASS C50 to Your PC (2-14) 1. Make sure the computer is turned off and the MultiPASS C50 is unplugged. 2. Connect the parallel cable to your MultiPASS C50: 3. Open the ferrite core and attach it to the parallel cable near the end closest to the MultiPASS C50 unit. 4. Connect the other end of the cable to the parallel interface port on your computer. Connecting the Telephone Line (2-16) 1. Connect one end of the supplied telephone line to the jack marked on the side of the Mul
Краткое содержание страницы № 7
Connecting the Power Cord (2-18) 1. Plug the supplied power cord into the power receptacle on the MultiPASS C50. 2. Plug the other end of the power cord into the outlet. Installing the BJ Cartridge (2-31) 1. Make sure the MultiPASS C50 is plugged in. CARTRIDGE 2. Press CARTRIDGE. J The cartridge holder moves toward the centre of the unit. 3. Open the printer cover by grasping the document guides and lifting. 4. Raise the green cartridge lock lever (on the cartridge holder) by gently pulling up o
Краткое содержание страницы № 8
5. Peel the protective foil off the new BJ cartridge’s protective packaging, and remove the cartridge. 6. Lift the orange cap off the cartridge’s print head, then remove the orange tape. 7. Hold the cartridge so the label faces outward, tilt it slightly forward and to the right, then slide it into the cartridge holder. 8. Lower the green lock lever completely. The BJ cartridge is now locked into position. 9. Set the paper thickness lever. For printing on plain paper: Cartridge Thickness Lever Po
Краткое содержание страницы № 9
Loading Print Media for Manual Feed (2-49) You will need to select manual feed from the print dialog box of your Windows application before printing. (See the MultiPASS Desktop Manager User’s Guide for instructions.) Load the sheet when the dialog box prompts you to do so. If you attempt to load the sheet without selecting manual feed, the sheet will be ejected. 1. Hold the sheet with its print side facing upward, and align the sheet with the left edge of the manual feeder (located at the back o
Краткое содержание страницы № 10
Entering Your Identification Information (2-58) When the C50 is connected to your PC, we recommend that you use the Setup Options dialog box in the Desktop Manager for Windows. Do not make your changes via the operation panel of the C50. C50 data is overwritten by the Desktop Manager for Windows software. FUNCTION 1. Press FUNCTION. 2. Use or to select USER SETTINGS, then press START/COPY. 1 2 DATE & TIME 3. Press START/COPY once more. J The currently set date and time appear. 4. Use the numeric
Краткое содержание страницы № 11
Installing the Desktop Manager Software If you are attempting to reinstall the Desktop Manager software, you must first uninstall your current installation of the software. For instructions on uninstalling the software, refer to Chapter 8, ”C50 Setup and Other Utilities in the Desktop Manager.” Installing in Windows 95/98 (2-4) This section provides instructions for installing the C50 printer driver and Desktop Manager in Windows 95/98. The system connects the printer driver to the appropriate pr
Краткое содержание страницы № 12
Setting Up C50 Options in the Desktop Manager (8-2) Since you can make changes to most option settings either on the C50 or in the Desktop Manager, be aware of the following: J Any option setting you make on the C50 does not display in the Desktop Manager Setup Options dialog box. J Any change you make to an option in the Desktop Manager overrides the corresponding setting you may have made on the C50 device itself. Therefore, before you make changes to these option settings, decide where you pr
Краткое содержание страницы № 13
Notes I-13 Canon MultiPASS C50 Getting Started ENGLISH
Краткое содержание страницы № 14
Notes I-14 Canon MultiPASS C50 Getting Started ENGLISH
Краткое содержание страницы № 15
Notes I-15 Canon MultiPASS C50 Getting Started ENGLISH
Краткое содержание страницы № 16
Notes I-16 Canon MultiPASS C50 Getting Started ENGLISH
Краткое содержание страницы № 17
Notes I-17 Canon MultiPASS C50 Getting Started ENGLISH
Краткое содержание страницы № 18
TM MultiPASS C50 GETTING STARTED II. Quick Reference Guide The following pages have been copied from the MultiPASS C50 User Documentation to get you started. Please use these manuals for full details. The Operation Panel ...................................................................................... II-2 Sending Documents Memory Sending ............................................................................ II-5 Manual Sending via the Handset .........................................
Краткое содержание страницы № 19
Getting Acquainted with Your MultiPASS C50 Paper Rest Sending Document Support Paper Guide Automatic Document Feeder (ADF) Sheet Feeder Printer Cover Document Guides Operation Panel Document Support For Scanned Documents Output Tray Output Tray Extension Paper Output Guides The Operation Panel (2-23) C LCD Display D Resolution B Receive Mode E One-Touch Speed Dial/ A Document Feed Lever Special Function Buttons ABC DEF 1 2 3 GHI JKL MNO FUNCTION CARTRIDGE RESUME 4 5 6 PQRS TUV WXYZ /PAUS
Краткое содержание страницы № 20
A Document feed lever Set this lever to the left ( ) for automatic document feed, or to the right ( ) for manual document feed. B RECEIVE MODE button Use this button to select whether the MultiPASS C50 is set to receive faxes manually (”MANUAL MODE”), to treat all calls as faxes (”FAX ONLY MODE”), to use an answering machine to receive all calls (”ANS. MACHINE MODE”), or to automatically switch between telephone and fax receiving, depending on the type of call (”Fax/Tel Mode”). C LCD display Thi
