Краткое содержание страницы № 1
ACHIEVE
MASTERY!
ENJOY CREATING
SOUNDS
WITH
YOUR SYNTHESIZER
Sound synthesis made easy!
Learn the basics of sound creation on Roland’s
new GAIA SH-01 synthesizer!
Краткое содержание страницы № 2
INTRO Introducing the Controls D Beam LFO Oscillator (OSC) By moving your This modulates the This determines the sound’s pitch. The oscilla- hand above the D sound. tor is the heart of a synthesizer, and is where Beam controller you select the waveform that forms the basis you can change of the sound. the sound’s pitch, volume, or bright- ness. USB Memory You can save your patches to USB memor memory y.. Tone You can layer three tones to be played simultaneously. Here’s where you select
Краткое содержание страницы № 3
Filter Amp EŠ ects This determines the This determines the sound’s Here you can apply reverb to give sound’s brightness. volume. This is also where the the sound more depth, or add other sound’s attack and decay are eˆ ects. adjusted. EXT IN You can connect a portable audio player here. Volume This adjusts the overall volume. Patch Here you can call up patches. Roland’s GAIA SH-01 synthesizer is designed so that these three elements of sound are arranged on the panel in an intuitive layou
Краткое содержание страницы № 4
STEP Play a Sound! 1 The GAIA SH-01 lets you start playing as soon as you turn on the power. 1. Turn on the power. 2. Press the NUMBER [1] button. In this example we’ve selected sound (patch) number 1. On the following page we’ll explain more about how to select “patches.” 3. Use the [VOLUME] knob to adjust the volume. 4. Play the keyboard. Did you hear sound? Now read the next page, and select and play other sounds (patches). 4
Краткое содержание страницы № 5
What is a “Patch”? The GAIA SH-01 lets you save the sounds you create. Each sound you save is called a “patch.” You can think of the locations that store the patches as being like shelves. You’ll select the desired patch by GROUP, BANK, and NUMBER. I I In n nt t ter er ernal M nal M nal Memor emor emory y y (sold separately) USB M USB Memor emory y PRESET GROUP USER GROUP USB MEMORY Non-rewritable 64 patches Rewritable 64 patches Rewritable 64 patches You can use these patches to store the orig
Краткое содержание страницы № 6
STEP Create a Sound! 2 Create a Bass Sound 1. Call up the “PRESET B-1” patch. Press the [1] button Press the [BANK] button and Press the [PRESET then press the [2] (B) button PATCH] button 2. Press the [KEY HOLD] button so it’s blinking. 3. Press the second C key from the bottom. You’ll hear an arpeggiated techno bass. 4. Turn the FILTER [RESONANCE] knob to the maximum position. 5. Slowly turn the FILTER [CUTOFF] knob from the maximum position down to the minimum. It’s eˆ ective to make this
Краткое содержание страницы № 7
Let’s try playing an arpeggiated synth bass sound. Turn the ž lter knob to make the sound change. How Do I Stop the Sound? Press the [KEY HOLD] button to stop the sound. Add More Low End! Turn on the [TONE 3] button, and play the keyboard. Layering three tones produces an even fatter sound. Save The Patch You’ve Created The GAIA SH-01 has internal memory in which you can store 64 patches that you’ve created. By using USB memory (sold separately), you’ll be able to store 64 more patches. To sa
Краткое содержание страницы № 8
STEP Create a Pad Sound 3 1. Call up the “PRESET A-3” patch. Press the [BANK] button and Press the [3] button Press the [PRESET then press the [1] (A) button PATCH] button 2. Press the [KEY HOLD] button so it’s blinking. 3. Simultaneously press the TONE 1 and TONE 2 [SELECT] buttons so they’re lit. You can use the [SELECT] buttons to select the tone that you want to edit. 4. Play a chord. 5. While playing a chord, set the AMP [ATTACK] slider in the range of about 2–5. The attack sound will b
Краткое содержание страницы № 9
Here we’ll try playing a polyphonic pad sound. This is a synth pad that combines an attack sound with a softer sound. 9. Lower the FILTER [ENV DEPTH] slider downward from the center. The sound of TONE 3 will disappear. For additional expressive possibilities, you can move the FILTER [ENV DEPTH] slider while you play. Turn oš the [KEY HOLD] button, and raise the TONE 3 AMP [R] (RELEASE) slider to the maximum position. The time over which the sound of TONE 3 disappears will lengthen. You c
Краткое содержание страницы № 10
STEP Create a Wind Sound 4 Let’s try playing a wind sound that was created using noise. Noise allows you to produce this type of sound. We’ll try controlling the character of the wind while listening to it. 1. Turn the FILTER [CUTOFF] knob all the way to the left. 2. Call up the “PRESET A-8” patch. Press the [BANK] button and Press the [8] button Press the [PRESET then press the [1] (A) button PATCH] button 3. Press the [KEY HOLD] button so it’s blinking. 4. Press and hold any key. The wind w
Краткое содержание страницы № 11
STEP Create A Distorted Guitar 5 Sound The GAIA SH-01 contains a powerful eˆ ects section that lets you use ž ve eˆ ects simultaneously. Let’s try creating the sound of a distorted guitar. 1. Call up the “PRESET A-6” patch. Press the [BANK] button and Press the [PRESET Press the [6] button then press the [1] (A) button PATCH] button 2. Press the [KEY HOLD] button to turn oŠ its illumination. 3. First, let’s listen to the undistorted sound. Press the EFFECTS [DIST] button so its light is oˆ ,
Краткое содержание страницы № 12
APPENDIX Examples of Creating Sounds Synth Bass (PRESET PATCH: H-1) 2 3 7 8 6 1 1 5 4 4 9 1 Press the [CANCEL/SHIFT] button and [WRITE] button to recall the initialized sound. The sawtooth wave is selected. Press the [VARIATION] button to light the [WAVE] button into red. 2 Since the bass usually sounds in the lower registers, turn the [PITCH] knob to the left so the sound is lowered by an octave. 3 Set the FILTER [CUTOFF] knob between 8 and 9 o’clock. The sound will diminish. 4 Next, you
Краткое содержание страницы № 13
Synth Lead (PRESET PATCH: H-7) 2 7 3 4 8 11 9 1 5 6 10 1 Press the [CANCEL/SHIFT] button and [WRITE] button to recall the initialized sound. The sawtooth wave is selected. Press the [VARIATION] button to light the [WAVE] button into red. 2 Turn the [PITCH] knob to the right so the sound is raised by an octave. 3 Set the FILTER [CUTOFF] knob to the 2 o’clock position. 4 Set the FILTER [RESONANCE] knob to the 8 o’clock position. 5 Now you’re ready to create the attack. Set the FILTER ENV [
Краткое содержание страницы № 14
APPENDIX Examples of Creating Sounds Synth Pad (PRESET PATCH: H-2) 2 3 6 10 12 1 4 5 7 8 9 11 1 Press the [CANCEL/SHIFT] button and [WRITE] button to recall the initialized sound. The sawtooth wave is selected. 2 Press the OSC [WAVE] button to select SUPER SAW. Press the [VARIATION] button to light the [WAVE] button into red. 3 Set the FILTER [CUTOFF] knob to the 1 o’clock position. The sound will become a bit darker. 4 Now you’re ready to specify the overall character of the sound. Set t
Краткое содержание страницы № 15
Sound EŠ ect (PRESET PATCH: H-5) 2 3 4 9 11 1 5 6 7 8 10 Here’s how to create a sound eš ect that might be appropriate for a spaceship taking oš . * These settings may produce a sudden, loud sound. Turn the knobs slowly to avoid damaging your hearing or your speakers. 1 Press the [CANCEL/SHIFT] button and [WRITE] button to recall the initialized sound. The sawtooth wave is selected. 2 Press the OSC [WAVE] button to select NOISE. 3 Turn the FILTER [CUTOFF] knob all the way to the left (MIN).
Краткое содержание страницы № 16
Experience the magic of creating your own sounds. For more than a quarter century, Roland has dež ned and redež ned the state of the art in synthesizers. Today, the fundamentals for sound creation remain the same for most synthesizers. By understanding the fundamentals, anyone can enjoy creating sound for virtually any type of synthesizer. 2007 V-Synth GT 2003 V-Synth 1996 JP-8000 1982 SH-101 2006 SH-201 JUPITER-8 1981 SH-1 1978 1973 SH-1000 2008 Fantom-G JD-800 1991 1987 D-50 1979 SH-2 1982 J
