Руководство по эксплуатации Metra Electronics 99-7954

Краткое содержание страницы № 1

INSTALLATION INSTRUCTIONS FOR PART 99-7954
APPLICATIONS
Suzuki SX4 2007-up
99-7954
KIT FEATURES
• DIN radio provision with pocket
• ISO mount radio provision with pocket
• Double DIN radio provision
• Stacked ISO units provision
KIT COMPONENTS
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Trim Plate
• E) Double DIN Brackets • F) Pocket
A B C D
E F
WIRING & ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• 70-1721 - Honda harness 1998-up
Antenna Adapter:

Краткое содержание страницы № 2

99-7954 Table of Contents Dash Disassembly – Suzuki SX4 2007-up 3 Kit Assembly – DIN radio provision with pocket 4 – ISO mount radio provision with pocket 5 – Double DIN radio provision 6 – Stacked ISO units provision 7 Caution Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. *NOTE: Refer also to the i

Краткое содержание страницы № 3

99-7954 Dash Disassembly 1. Unclip and remove the (2) outside trim panels. (Figure A) 2. Remove (4) Phillips screws securing the radio to the sub dash. Unplug and remove radio. (Figure B) Continue to kit assembly (Figure A) (Figure B) 3

Краткое содержание страницы № 4

Kit Assembly 99-7954 DIN radio provision with pocket 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Slide the DIN cage into the radio housing and secure by bending the metal locking tabs outward. (Figure A) 3. Slide the aftermarket radio into the cage until it snaps into place. (Figure A) (Figure B) 4. Snap the pocket into the

Краткое содержание страницы № 5

Kit Assembly 99-7954 ISO mount radio provision with pocket 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Mount the ISO brackets to the radio with the screws supplied with the radio. (Figure A) 3. Slide the radio into the radio housing until it snaps into place. (Figure B) (Figure A) 4. Snap the ISO trim plate onto the front of

Краткое содержание страницы № 6

Kit Assembly 99-7954 Double DIN radio provision 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Cut and remove the center bar from the radio housing. (Figure A) 3. Snap the Double DIN brackets to the inside edge of the radio housing. (Figure B) (Figure A) 4. Slide the Double DIN radio into the bracket/trim plate assembly and sec

Краткое содержание страницы № 7

Kit Assembly 99-7954 Stacked ISO units provision 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Cut and remove the center bar from the radio housing. (Figure A) 3. Snap the Double DIN brackets to the inside edge of the radio housing. (Figure B) (Figure A) 4. Slide the stacked ISO units into the bracket/radio housing assembly an

Краткое содержание страницы № 8

INSTALLATION INSTRUCTIONS FOR PART 99-7954 METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION REV. 5/18/11