Краткое содержание страницы № 1
Краткое содержание страницы № 2
Contents Redialing the Last Dialed Number .................................... 26 Welcome/Accessibility...................................................2 Selecting the Ring Tone and Volume ................................ 26 Terminology/Manual.Conventions................................3 Adjusting the Earpiece Volume ......................................... 26 Product.Overview...........................................................4 Using Call Waiting ......................................
Краткое содержание страницы № 3
Welcome Congratulations on your purchase of the Uniden multi-handset cordless telephone. This cordless phone is designed for reliability, long life, and outstanding performance. Note:.Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this. manual.may.differ.from.the.actual.unit..The.color.of.your.cordless.telephone.may.vary. ® Uniden is a registered trademark of Uniden America Corporation. AutoTalk, AutoStandby and UltraClear Plus are trademarks of Uniden Ame
Краткое содержание страницы № 4
Terminology Base The main part of the phone that connects to your phone line and lets you make and receive calls. Charger A cradle that charges the handset battery. It connects to power but does not connect to a phone line. Caller ID is available from your telephone provider. With this service, you can see the name and number CID of incoming callers. Caller ID on Call Waiting is available from your telephone provider. With this service, you can see CIDCW incoming caller information while on an
Краткое содержание страницы № 5
Product.Overview Main.Phone.Features • 5.8 GHz Extended Range Technology • Last Number Redial • Multi-Handset System • Tone/Pulse Dialing (Extra Handset(s) & Charger(s) Included) • Page/Find Handset Key • Call Transfer from Handset to Handset • Earpiece/Ringer Volume Controls • Caller ID/Caller ID on Call Waiting • Mute or Turn Ringer Off • 3-Line Backlit LCD • Hearing Aid Compatible • Trilingual Menu Displays (English, Spanish, or French) • 20-Channel Auto Scan • 30 Caller ID Memory • Desk or W
Краткое содержание страницы № 6
Controls.and.Functions Handsets . Handset antenna 2. Belt clip hole 1 1 3. Jack for optional headset 4. Handset ringer speaker 5. Handset battery compartment 6 6 6. Handset earpiece 7. LCD display 2 2 8. [ ] and [ ] (volume & ringer up/down) keys 7 7 9. [cid/menu] key 0. [ /tone/ ] (left cursor) key 8 8 3 3 13 13 . [redial/pause] key 4 4 2. [select/channel] key 14 14 9 9 3. [talk/flash] key 4. [end] key 5. [#/ ] (right cursor) key 5 5 6. [mem] (memory) key 10 10 15 15 7. [del
Краткое содержание страницы № 7
20. Base antenna Main.Base.Unit 2. Base charging contacts 38 38 39 39 22. Base speaker 20 20 23. Message counter LED 24. [ ] (answer on/off) key 22 22 25. charge/in.use LED 26. [ ] (delete) key 23 23 27. [ ] (play/stop) key 24 24 25 25 28. [ ] (skip/fast forward) key 26 26 27 27 28 28 21 21 29. [ringer] key 29 29 30. [find hs] key 30 30 31 31 3. [greeting] key 32 32 32. [volume/select/ ] (up) and [volume/select/ ] (down) keys 34 34 36 36 33. [ ] (repeat/rewind) key 33 33 35 35 37 37 34. [men
Краткое содержание страницы № 8
Installing.the.Phone Choosing.the.Best.Location Before choosing a location for your new phone, here are some important guidelines you should consider: A Avoid heat sources, such as radiators, void heat sources, such as radiators, A Avoid noise sources such as a window by void noise sources such as a window by air ducts, and sunlight air ducts, and sunlight a street with heavy traffic a street with heavy traffic A Avoid television sets and other void television sets and other A Avoid microwave ov
Краткое содержание страницы № 9
Installing.the.Rechargeable.Battery.Packs.into.the.Handsets Each handset is powered by a rechargeable battery pack. Once installed, the battery charges automatically when the handset is placed in the base or charging cradle. To install the rechargeable battery pack: 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the small jack inside the battery c
Краткое содержание страницы № 10
Installing.the.Base.Unit.and.Charging.Cradles ) Connect each AC adapter to the DC.IN.9V jack and to each standard 20V AC wall outlet. Note:. •..Use.only.the.supplied.AD-314.AC.adapter.for.the. base.unit.and.AD-310.or.AD-1010.for.the.charging. cradle(s)..Do.not.use.any.other.AC.adapter. •..Do.not.place.the.power.cord.where.it.creates.a.trip. hazard.or.where.it.could.become.chafed.and.create.a. fire or electrical hazard. 2) Charge the handsets by placing one handset in the base unit and other
Краткое содержание страницы № 11
3) Make sure that the charge/in.use LED and LED illuminate. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the cradle’s charging contacts. Note:. •..Connect.the.AC.adapter.to.a.continuous.power.supply.(not. controlled.by.a.wall.switch). •..Place.each.cradle.close.to.the.AC.outlet.to.avoid.long. extension.cords. •. Charge.your.handsets.at.least.15.-.20.hours.before.plugging. into.the.phone.line.. 4) Once the handset b
Краткое содержание страницы № 12
Mounting.the.Base.Unit.on.a.Wall Standard.wall.plate.mounting This phone can be mounted on any standard wall plate. ) Plug the AC adapter to the DC.IN.9V jack. 11 44 77 2) Route the AC adapter cord through the molded wiring channel as shown. 55 66 22 3) Plug the AC adapter into a standard 20V AC wall outlet. 77 4) Plug the telephone line cord into the TEL.LINE jack. 5) Route the telephone line cord through the molded wiring channel as shown. 33 6) Plug the telephone line cord into the telepho
Краткое содержание страницы № 13
• Make sure the wall material is capable of supporting the weight of the base and handset. • Use #0 screws (minimum length of -3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed. ) Insert two mounting screws into the wall (with their appropriate anchoring device), 3-5/6 inches apart. Allow about /8 of an inch between the wall and screw heads for mounting the phone. 2) Refer to steps through 7 on page to mount the telephone. Install
Краткое содержание страницы № 14
Register.Handsets.to.the.Main.Base.before.Using! Each handset will need to be registered to the main base unit before use. Whichever handset you choose to charge in the base unit will automatically register to the base unit. The handset charging in the extra charging cradle MUST also be registered to the base unit before use. To register the extra handset(s): ) Be sure all handsets are fully charged. 2) Pick up the handset from the charging cradle, and place it in the base unit. The charge/i
Краткое содержание страницы № 15
When.to.Re-register.Handsets In some cases, it may be necessary to re-register your handsets. To re-register your handsets, please follow registration steps outlined on page 3. Re-registration is required in the following scenarios: ) Each time the digital security code is changed. (Refer to page 47 for details regarding the Digital Security Code.) 2) When there is a power failure for more than one hour. 3) If any handset’s battery becomes very low, the handset must be recharged for 5 - 20
Краткое содержание страницы № 16
Basic.Setup There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. CIDCW and Dial Mode options can only be set by using Handset . If you try to set by using other handset, you will not see these options listed on the LCD screen. (You can easily identify Handset shows as HS1 will be seen in the display while the phone is charging.) AutoTalk, Area Code and Language options can be set by using any handset. Ac
Краткое содержание страницы № 17
Activating.Caller.ID.on.Call.Waiting.(HS1.only) Caller ID allows you to see the name and number of the calling party before you answer the phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that comes in when you are on the line. You must subscribe to Caller ID service through your local telephone provider to use this feature. ) When the phone is in standby, press and hold [cid/menu]. The following screen appears. 2) Press [ ] to move the pointer to select CID
Краткое содержание страницы № 18
2) Press [ ] to move the pointer to select AREA CODE. 3) Press [select/channel]. If an area code was already stored, the phone will display it. 4) Use the number keys ( [0] – [9] ) to enter the three-digit area code. If you make an error, use [delete/transfer] to backspace. 5) Press [select/channel]. A confirmation tone sounds. 6) Press [end] or return the handset to the charging cradle to complete the setting. The handset returns to standby. Choosing.the.Dialing.Mode.(HS1.only) Your phone can
Краткое содержание страницы № 19
2) Press [ ] to move the pointer to select DIAL. 3) Press [select/channel] to set the phone to pulse dialing. 4) Press [end] and return the handset to the base unit to complete the setting. The handset returns to standby. Note:. •. If.your.phone.system.requires.pulse.dialing.and.you.need.to.send.the.DTMF.tones.during.a.call,. you.can.temporarily.switch.over.to.tone.dialing..(Refer.to."Tone.Dialing.Switch-over".on.page.28.) •. To.enable.the.setting.change.of.Dialing.Mode,.you.need.to.return.the.
Краткое содержание страницы № 20
Using.the.Speed.Dial.Memory Your cordless phone allows you to store up to ten names and numbers in each handset. You can dial these numbers with just a few key presses. The speed dial memory is not limited to phone numbers. You can store any number (up to twenty digits) that you need to enter once your call connects. This is referred to as Chain Dialing. An example is a frequently refilled prescription number. Store your pharmacy phone number in one speed dial and your most frequently refill
