Краткое содержание страницы № 1
• Accessories
Installation Instructions
Mercedes-Benz V60 adaptor with
®
Bluetooth wireless technology
Preliminary
Краткое содержание страницы № 2
Mercedes-Benz V60 adaptor with ® Bluetooth wireless technology Page 1 1 M+P-03F-6306 Preliminary
Краткое содержание страницы № 3
The Mercedes-Benz approved/ ® recommended Bluetooth Phones can be utilized inside Mercedes-Benz vehicles. Validity Please contact your Mercedes-Benz Dealer to validate if your vehicle is supported. The vehicles need to have the Mercedes-Benz mobile telephone kit installed and a ® Mercedes-Benz-approved Bluetooth mobile telephone. Approved mobile telephones are listed and can be purchased on the Internet at www.wireless4mb.com or call 1-800-266-7746 to speak to a wireless activation spe
Краткое содержание страницы № 4
Notes The manufacturer reserves the right to change technical details from those shown in the illustrations contained in these installation instructions. These installation instructions also refer to the vehicle Operator's Manual or the COMAND Operator's Manual and mobile telephone manual. Please refer to them for reference. Use of a mobile telephone other than a Mercedes-Benz approved/recommended model may result in improper performance and cannot be supported or serviced by Mercedes
Краткое содержание страницы № 5
Inserting the Mercedes-Benz V60 ® adaptor with Bluetooth Make sure that the starter switch is in position 1, 2 or 3 (see the vehicle Operator's Manual). 4 1 3 2 M+P-03F-6307 Insert the Mercedes-Benz V60 adaptor with ® Bluetooth (1) into the connector (2) to engage it into the cradle (3). Note After the adapter is inserted, the LED button (4) will flash slowly in order to signal that it is ready for pairing. If this does not occur, remove the Mercedes-Benz V60 ® adaptor with Bluetooth a
Краткое содержание страницы № 6
Pairing the mobile telephone with the Mercedes-Benz V60 adaptor with ® Bluetooth Notes Make sure that the starter switch is in position 1, 2 or 3 (see the vehicle Operator's Manual). In order to be paired, the Mercedes-Benz ® V60 adaptor with Bluetooth must be connected into the cradle and the LED button (4) must be flashing slowly. If applicable the keypad lock feature should be disabled on the mobile telephone. 4 M+P-03F-6310 1. Press and hold the LED button (4) for approx. 3 seconds.
Краткое содержание страницы № 7
2. For information on pairing the mobile telephone, see the mobile telephone manual or visit www.wireless4mb.com for instructions. The Mercedes-Benz V60 ® adaptor with Bluetooth will appear as "MB PhoneSystem" on the mobile telephone. Once the mobile telephone detects the Mercedes-Benz V60 adaptor with ® Bluetooth , the mobile telephone will prompt the user for a Pass-Key. 3. Enter 62872 on the mobile telephone. Depending on the type of mobile telephone being used, it may be necessary
Краткое содержание страницы № 8
Depending on the type of mobile telephone being used, a message may appear in the mobile telephone's display (see the mobile telephone manual). The mobile telephone will now change to hands-free mode. It is possible to send and receive calls via the hands-free system (see the vehicle Operator's Manual or the COMAND Operator's Manual.) The Signal Strength indicator shows the status of Mercedes-Benz V60 adaptor. This bar display represents the following: M+P-03F-6411 ® • 1 bar - the Blue
Краткое содержание страницы № 9
• If the mobile telephone is connected ® via Bluetooth to the Mercedes-Benz ® V60 adaptor with Bluetooth , the telephone home screen will be shown. •"No service" will be displayed, if there is no access to the network. Notes If the pairing process is unsuccessful, remove the Mercedes-Benz V60 adaptor ® with Bluetooth from the cradle (see page 11). Re-insert the Mercedes-Benz V60 ® adaptor with Bluetooth and pair it with the mobile telephone (follow the pairing procedure found on page 4
Краткое содержание страницы № 10
Notes Once the telephone book has been downloaded any changes made to the mobile telephone's telephone book will not be updated in the vehicle automatically. In order to update the telephone book press the LED button (4) briefly (see page 4). ® When using Bluetooth the mobile telephone uses more power. Since the mobile telephone is not being charged the battery should have a sufficient charge. Neither SMS messages nor the mobile telephone call-lists can be accessed via the ® Operating
Краткое содержание страницы № 11
Connecting the mobile telephone and the Mercedes-Benz V60 adaptor with ® Bluetooth manually The mobile telephone can be used to connect manually to the Mercedes-Benz V60 ® adaptor with Bluetooth (see mobile telephone manual). Notes Before manual connection, the mobile telephone must previously be paired with the Mercedes-Benz V60 adaptor with ® Bluetooth (see pairing procedure on page 4). When within the range (approx. 30 ft.) of the Mercedes-Benz V60 adaptor with ® Bluetooth , the co
Краткое содержание страницы № 12
Connecting the mobile telephone and the Mercedes-Benz V60 adaptor with ® Bluetooth automatically When the starter switch is in position 1, 2 or 3 (see the vehicle Operator's Manual), a connection between the mobile telephone and the Mercedes-Benz V60 adaptor with ® Bluetooth will be established. ® Disconnecting the Bluetooth connection automatically The connection between the Mercedes-Benz ® V60 adaptor with Bluetooth and the mobile telephone is automatically disconnected when the mobi
Краткое содержание страницы № 13
Errors If the LED button (4) flashes very rapidly make sure the LED button (4) is not stuck in the Mercedes-Benz V60 adaptor with ® Bluetooth . If the LED button (4) continues flashing very rapidly or if the connection between the mobile telephone and the Mercedes-Benz ® V60 adaptor with Bluetooth is malfunctioning, then disconnect the connection manually (see page 10) and re- establish the connection manually (see page 10). If this does not correct the problem, please consult a Merced
Краткое содержание страницы № 14
Appendix LED status Adaptor status lit continuously Mobile telephone connected (see page 5) slow flashing No paired mobile telephone detected (see page 3) fast flashing Discover Mode (see page 4) very rapidly Stuck LED button or fail flashing state (see page 11) Note This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including int
