Краткое содержание страницы № 1
VER1.0
4Channel Built in DVR
Краткое содержание страницы № 2
Installation & Safeguards INSTALLATION & SAFEGUARDS All the safety and operating instructions should be read before the unit is operated. Environment Condition for Installation - To prevent electric shock or other hazard, do not expose units to rain, moisture, or dust. - This unit should be located in an area with low humidity and a minimum of dust.. - Place this unit in a well-ventilated place and do not place heat-generating objects on this unit. - This unit should not be located in an area w
Краткое содержание страницы № 3
Contents Contents CHAP. 1 Features & Package Contents ---------------------------------------------------------------- 4 1-1. Features ---------------------------------------------------------------- 4 1-2. Package Contents ---------------------------------------------------------------- 5 CHAP. 2 Function of Each Button ---------------------------------------------------------------- 6 2-1. Front ---------------------------------------------------------------- 6 2-2. Rear ----------------------
Краткое содержание страницы № 4
Contents 4-8. PTZ Camera Operation ---------------------------------------------------------------- 18 4-9. Data Back-Up ---------------------------------------------------------------- 18 CHAP. 5 Set Up ---------------------------------------------------------------- 19 5-1. Entering the Menu ---------------------------------------------------------------- 19 5-2. Display Setup ---------------------------------------------------------------- 20 1) Screen Display --------------------------------
Краткое содержание страницы № 5
CHAP. 1 Features & Package Contents CHAP. 1 Features & Package Contents 1-1. Features Live View Real time display per camera Auto Sequence PIP (Picture in picture) Digital Zoom Display Freeze Simple Playback mode Simple PTZ camera control Record Variable Record resolution (For higher picture quality or higher recording speed) Efficient Image Quality setup in 5 steps Schedule Record / Holiday Record Event Record (Alarm / Motion) Network View Live and Playback images across IP network Copy imag
Краткое содержание страницы № 6
CHAP. 1 Features & Package Contents 1-2. Package Contents 3. Power Cable 2. Remote Controller 1. Built In DVR Main Unit 6. Software CD 4. Power Adapter 5. User’s Manual 9. Bolts and Wall 8. Connector cover bracket Mount Bracket 7. Battery for remote controller Package Contents Description 1. DVR Main Unit STAND-ALONE DIGITAL VIDEO RECORDER 2. Remote Controller DVR control 3. Power Cable AC power supply to adapters for 12 V DC power 4. Power Adapter 12 V DC power supply 5. User’s Manual User’
Краткое содержание страницы № 7
CHAP. 2 Function of Each Button CHAP. 2 Function of Each Button 2-1 FRONT ① ② ③ ④ ⑤ ⑥ ① ② ③ ④ ⑤ ⑥ Name Function ① Camera selection Pressing this button will display a full screen image of that camera ② Record / Playback stop and return to Schedule Record from STOP Emergency Record. Playback PLAY Playback of recorded data on HDD SEARCH Search recorded data on HDD (Press the button at 2 second) ③ SETUP MENU Set up for SYSTEM MENU or Use to exit the menu Press MENU button before powering off
Краткое содержание страницы № 8
CHAP. 2 Function of Each Button 2-2. REAR ④ ⑥ ④ ⑥ ① ② ③ ⑤ ⑦ ⑧ ① ② ③ ⑤ ⑦ ⑧ Name Function 1 RS 485 Connection with PTZ Camera or other external device using RS 485 interface RELAY Output Relay out terminal SENSOR Input Sensor input terminal 2 ETHERNET Connection to ETHERNET device 3 RS-232C Connection to external device as PC using RS-232C to control the DVR 4 CAMERA Input Connection with camera 5 LOOP Output Camera loop out 6 MONITOR Output Connection with Composite Monitor 7 VCR Output Connect
Краткое содержание страницы № 9
CHAP. 3 Installation CHAP.3 Installation 3-1. Installation Configuration 8
Краткое содержание страницы № 10
CHAP. 3 Installation 3-2. Detailed Installation 1) Connector cover bracket 9
Краткое содержание страницы № 11
CHAP. 3 Installation 2) Camera Connect cameras to the camera input on rear panel of Built in DVR. 3) Monitor Connect the video output MONITOR to Video-In of Main monitor. 4) Power Connect one DC 12V, 6.6 A Adaptor to the back side of Power Jack. Notice To avoid accidental deletion of HDD data, please make sure to press MENU button before powering powering off the unit. This takes the unit out of record mode for safe shutdown 10
Краткое содержание страницы № 12
CHAP. 3 Installation 5) VCR, VIDEO PRINTER Connect VCR or VIDEO Printer to VCR out on the rear panel of Built in DVR. 6) Other External Device RS-232C : Control DVR through RS-232C port by using PC. RS-485 : Control external device like PTZ Camera RELAY Output : Relay Output SENSOR Input : SENSOR Input (Alarm connection) ETHERNET : Connection to LAN, WAN, Internet. 11
Краткое содержание страницы № 13
CHAP. 3 Installation 7) Connector Pin Assignment No Description NO Description 1 DCD Data Carrier Detect 6 DSR Data Set Ready 2 RxD Receive data 7 RTS RS232C: Rx/Tx data 3 TxD Transmit data 8 CTS RS232C: Rx/Tx data 4 DTR Data Terminal data 9 5 GND Signal Ground 8) RS-232C ASCII-code Following ASCII-Codes(Hexa-Code) are for programmers who want to control DVR unit via the RS232C Port using keyboard of PC. (The following table is based on 16ch DVR.) All ASCII-Code is 1
Краткое содержание страницы № 14
CHAP. 4 Operation 4-1. System Log-In DVR LOG-IN 1) After recognition to Hard Disk Drive was installed, press the [MENU] button. 2) Enter password with channel number button from No.1 to No.10 on the front of the Built in DVR. ENTER PASSWORD : _ _ _ _ _ _ _ _ (Maximum of 8 digits are available) INPUT YOUR OWN PASSWORD TO EXIT, PRESS [MENU] 3) After inputting the password, press the [ENTER] button. Administrator : If the password entered matches previously set password, “ LOGIN ADMIN” messag
Краткое содержание страницы № 15
CHAP 4. Operation 4-3. Display Configuration HDD Status ETHERNET status In live mode : Amount of data recorded Connected In Playback mode : Amount of data played Disconnected 1. Current Time & Date 3. Status of DVR system Schedule Record (Green) Record Stop (White) Stop PIP Forward Playback Backward Playback FREEZE Pause 1/16~1/2x forward playback SEQUENCE 1/16~1/2x backward playback 2~4x forward playback ZOOM 2~4x backward playback 16~64x forward playback 16~64x backward playback ALARM Reco
Краткое содержание страницы № 16
CHAP. 4 Operation 2) View in Sequence Press [SEQ] button. It automatically displays full screen images in sequence. CH04 ● CH03 ● ● CH02 CH01 3) Picture in Picture(PIP View) When it is in full screen display mode, you can see other camera in a small window by pressing [PIP].The other camera in small window is rotating in sequence to next number of camera and you can set the rotating time interval as per the procedure in SYSTEM MENU-CONFIGURATION- INTERVAL SETUP. CAM-01 2 4) Freeze View Full
Краткое содержание страницы № 17
CHAP. 4 Operation 4-5. Record Recording mode set before delivery by manufacturer (Default recording mode) is Schedule Recording. In this default recording mode, it records 24 hours/day continuously in weekday and on the weekend. Schedule Record [GREEN] Stop Record [WHITE] - Schedule Record Record and stop as set (time interval and record type) in RECORD-SCHEDULE SETUP menu. - Stop Record Recording stopped as set in RECORD-SCHEDULE SETUP menu. On the screen - Schedule Record : Green Record I
Краткое содержание страницы № 18
CHAP. 4 Operation 4-7. Search Press [SEARCH] button, and 3 different methods for searching recorded data are available as shown in following SEARCH window. For selecting searching method, use direction key. After selecting each search method, press [ENTER] button for playback. exit, press [MENU] button. 1) SEARCH BAR Search by percentage of total recorded data. It starts from image corresponding to set % of data on the search bar. 2) TIME/DATE Search by time & date. Playback starts from the
Краткое содержание страницы № 19
CHAP. 4 Operation 4-8. PAN/TILT/ZOOM Camera Operation Press [PTZ] button first for PTZ control mode. User can control PTZ camera connected to DVR unit by pressing any one of those 5 buttons, one after the other, as needed, and it is just like control by separate PTZ controller. Button PTZ command MENU Select the PTZ command NEXT Select the PTZ command + Select the next camera - Select the before camera ENTER When you press this button, PTZ command is activated. If you leave this button, PTZ c
Краткое содержание страницы № 20
CHAP. 5 Set Up CHAP. 5 Set Up 5-1. Entering into the Menu Enter into SYSTEM MENU by pressing [MENU] button. Button Function MENU Enter into SYSTEM MENU, Move to previous menu, ESC ENTER Selection key, Move to sub-menu, change status (ON or OFF) NEXT Move to next page UP Move to upper side DOWN Move down side LEFT Move to the left RIGHT Move to the right MINUS [-] Decrease the option value PLUS [+] Increase the option value SYSTEM MENU RECORD CONFIGURATION SCREEN DISPLAY SCHEDULE SETUP MONITO
